43pus7805 12 Fixed New! - How To Hard Reset Philips

How to Hard Reset Philips 43PUS7805/12: A Step-by-Step Guide

Are you experiencing issues with your Philips 43PUS7805/12 TV, such as freezing, crashing, or failing to turn on? If so, a hard reset may be the solution you need. In this article, we'll walk you through the process of hard resetting your Philips 43PUS7805/12 TV, and provide some additional troubleshooting tips to help you get back up and running.

What is a Hard Reset?

A hard reset, also known as a factory reset, is a process that restores your TV to its original settings, erasing all saved data, settings, and installed apps. This can be a useful solution when your TV is experiencing software issues, as it can help to resolve problems caused by corrupted data or incorrect settings.

Why Do I Need to Hard Reset My Philips 43PUS7805/12?

There are several reasons why you may need to hard reset your Philips 43PUS7805/12 TV. Some common issues that can be resolved with a hard reset include:

Freezing or crashing
Failure to turn on
Sound or picture issues
App crashes or failure to load
Connectivity problems (e.g. Wi-Fi, Bluetooth)

How to Hard Reset Philips 43PUS7805/12

Before you start, make sure you have the following: how to hard reset philips 43pus7805 12 fixed

Your TV's remote control
The TV's original settings menu accessible (if possible)

Here are the steps to hard reset your Philips 43PUS7805/12:

Press and hold the "Settings" button: On your remote control, press and hold the "Settings" button (represented by a gear icon) for at least 10 seconds.
Select "System" or "Advanced Settings": Using the arrow keys on your remote, navigate to the "System" or "Advanced Settings" menu. The exact menu name may vary depending on your TV's software version.
Choose "Factory Reset" or "Reset": Scroll down to the "Factory Reset" or "Reset" option and select it.
Enter your TV's PIN code (if set): If you have set a PIN code for your TV, you will be prompted to enter it. If you don't know the PIN code, try using the default code "0000".
Confirm the reset: You will be asked to confirm that you want to perform a factory reset. Select "Yes" to proceed.
Wait for the reset to complete: The TV will now begin the reset process, which may take several minutes. Do not unplug the TV or interrupt the process.
Set up your TV again: Once the reset is complete, your TV will turn off and then back on again. You will need to set up your TV again, including selecting your language, country, and configuring your network settings.

Alternative Method: Using the TV's Buttons

If you're unable to access the settings menu or your TV is not responding to the remote control, you can try using the TV's buttons to perform a hard reset. Here's how:

Unplug the TV: Unplug the TV from the power outlet.
Press and hold the "Volume Down" and "Source" buttons: On the TV itself, press and hold the "Volume Down" and "Source" buttons simultaneously.
Plug in the TV: While holding the buttons, plug the TV back into the power outlet.
Release the buttons: Release the "Volume Down" and "Source" buttons after 10 seconds.
Wait for the reset to complete: The TV will now begin the reset process, which may take several minutes.

Troubleshooting Tips

If a hard reset doesn't resolve your issue, here are some additional troubleshooting tips:

Check for firmware updates: Make sure your TV is running the latest firmware version.
Restart your TV: Sometimes, a simple reboot can resolve the issue.
Check for loose connections: Verify that all cables, including power and HDMI cables, are securely connected.
Contact Philips support: If none of the above steps resolve your issue, contact Philips support for further assistance.

Conclusion

Title: Finally fixed the boot loop on my Philips 43PUS7805/12 – Here’s the real working method
Rating: ⭐⭐⭐⭐⭐ (5/5 – but only after finding the right steps) How to Hard Reset Philips 43PUS7805/12: A Step-by-Step

I spent two days fighting with my Philips 43PUS7805/12. It was stuck on the Android TV logo, then kept restarting. No remote response, nothing. Most online guides said "just unplug it" or "press the joystick button" – which didn’t work for me.

After digging through deep forums, I finally got the hard reset (factory reset) to work. Here’s the exact fixed method for this specific model:

The Remote Shortcut Method (Most Effective for this Model)

Many users don't realize the remote can send a hard reset command during boot.

Unplug the TV from the wall socket.
Wait 2 minutes to drain residual power.
Plug the TV back in.
Immediately point the remote at the TV and press and hold the Power button + the Volume Down button simultaneously.
Keep holding these buttons until you see the Philips Android Recovery Menu (a black screen with blue/yellow text).

Method 2: Hard Reset (Forced Recovery) – For Frozen/Bricked TVs

Use this method if the TV is stuck on the Philips logo, stuck in a boot loop, or unresponsive to the remote.

For this method, you will need to use the small joystick button located on the bottom edge or back left corner of the television (underneath the Philips logo).

Step-by-step:

Unplug the TV from the mains power socket.
Wait 60 seconds (This allows residual power to drain from the capacitors).
Locate the physical joystick button on the bottom bezel of the TV (center-left side).
Press and hold the joystick button inward (do not push up/down/left/right—press it straight down like a button).
While keeping the button pressed, plug the TV back into the mains power.
Continue holding the button until you see the Philips splash screen appear, then disappear, and then appear a second time.
- Note: This usually takes about 15–20 seconds.
Release the joystick button immediately when the logo appears the second time.

The TV should now enter Recovery Mode (an Android text-based menu). Freezing or crashing Failure to turn on Sound

Navigating Recovery Mode:

Use the joystick (up/down) to move through the options.
Press the joystick inward to select.
Use the Volume +/- buttons on the remote (if they work) or the joystick to navigate.

In the recovery menu, use the joystick to select Wipe data/factory reset.
Select Yes – delete all user data.
Once complete, select Reboot system now.

The TV will restart fresh. The first boot may take up to 5-10 minutes as it rebuilds the Android cache.

Final Checklist for the "Fixed" State

Once you have successfully completed Method 1 or 2, and your TV is back to the setup wizard, follow this checklist to ensure the problem stays fixed:

Do NOT restore from a Google backup. Set the TV up as a new device to avoid reloading the bad app or setting.
Update the software immediately. Go to Settings > Device Preferences > About > System Update. The hard reset rolled you back to factory software; a bug fix might be waiting.
Install apps one by one. The crash might have been caused by a specific app (often Kodi, Plex, or a third-party launcher). Install them slowly and test the TV for an hour between installs.

Troubleshooting: My TV is Still "Fixed" (Not Resetting)

If the issue persists after the reset, here are the common solutions:

Reinstall Channels: Sometimes users confuse "Factory Reset" with "Reinstall Channels." If your apps are gone but your channel list is not, go to: Settings > Channel Settings > Reinstall Channels.
Power Drain (Soft Reset): Before declaring the TV broken, unplug it from the wall for 5 full minutes. Hold the physical power button on the TV set for 30 seconds while it is unplugged. Plug it back in. This drains residual power from the motherboard capacitors and fixes many "frozen" states.
Contact Support: If the TV is stuck on the "Philips" logo and the Service Menu reset did not work, the mainboard firmware may be corrupted. This typically requires a technician to re-flash the software via a USB stick or replace the mainboard.

Method 2: Hard Reset Using the Physical Joystick Button (No remote needed)

Use this method if the TV is frozen, boot-looping, or the remote is not responding.

The Philips 43PUS7805/12 has a small multi-directional joystick button on the bottom edge (under the center of the TV, behind the LED light).

Why most guides fail:

The standard "Volume Down + Power" button combo does not work on the 43PUS7805/12.
The TV will ignore the remote during a freeze – you must use the physical joystick.
Holding the joystick without pushing down only brings up the basic menu, not recovery mode.

Method 3: The "No Remote, No Joystick" Emergency Reset

If your remote is broken and the joystick is physically damaged, there is one last trick. You will need a standard USB keyboard (wired or wireless with a USB dongle).

Plug the USB keyboard into the USB port on the back of the TV.
Unplug the TV from power.
Plug the TV back in.
As the TV tries to boot, repeatedly press Ctrl + Alt + Del on the keyboard.
Alternatively, press Alt + Print Screen repeatedly.
This sometimes forces the TV to interrupt the boot cycle and drop into a diagnostic mode. From there, use the keyboard arrow keys to navigate to Settings > Reset (as in Method 1).

Method 2: The "Service Menu" Reset (If the TV is Frozen)

If your TV is stuck on a logo, frozen, or you cannot access the main menu, use this method. Be careful in this menu; do not change settings you do not understand.

Put the TV into Standby mode (Red LED on).
On the remote control, press the following buttons quickly in sequence: 0 6 2 5 9 6 followed immediately by the Standby/Power button. (Note: On some remotes, you may need to press the buttons while the TV is on: Menu then 2 5 8 0).
A "Service Menu" will appear on the screen.
Use the Arrow keys to navigate to Special Set (or sometimes labeled Option or Reset).
Look for an option labeled Factory Reset or Init. EEPROM.
Press OK to execute the reset.
The TV will reboot.