Ts1162 Installation Manual ^hot^ May 2026
Tecom TS1162 is a robust 3-LED Remote Arming Station (RAS) keypad used primarily with Challenger security systems. Because detailed installation and programming manuals for Tecom hardware are often restricted to trained installers, they can be difficult to find on public websites. support.firesecurityproducts.com.au Key Technical Details for Installation
If you are looking for specific configuration steps, the following details are essential for the TS1162: Wiring & Connection
: The keypad connects directly to the Challenger RS-485 LAN and can be situated up to from the main panel or Intelligent Access Controller. Addressing : You must use DIP switches 1 through 4 on the unit to set its unique RAS address. Inputs & Outputs : Features a dedicated input for a Request to Exit (RTE) sensor or push-button. Open Collector Output
: Includes an output that can control a door strike or relay. Environment : It is rated , making it suitable for wet or dusty environments. Ness Corporation Official Documentation & Support Aritech/Tecom Support Portal ts1162 installation manual
: The most reliable "article" and source for the full manual is the Tecom Manuals page
on the Kidde Global Solutions support site. Note that full installation and programming guides may require a dealer login Product Datasheet
: You can find a high-level overview and technical specifications on the Aritech official product page Common Default Codes : For initial setup on Challenger V8 systems, the default installer code aritech.com.au specifically, or do you need help programming the keypad's address? Remote Arming Station (RAS) Keypad, 3 LED - Aritech Tecom TS1162 is a robust 3-LED Remote Arming
Remote Arming Station (RAS) Keypad, 3 LED - Aritech. Skip to: aritech.com.au Tecom Manuals - Kidde Global Solutions Support 14 Nov 2025 —
Based on a search for the model number TS1162, this identifier most commonly corresponds to the Roof Rack Side Rails (specifically the low-profile, sleek design) manufactured by Thule or sold as OEM accessories for vehicles such as the Subaru Outback.
As the exact installation steps vary slightly depending on the specific vehicle model year, the following is a comprehensive report detailing the installation process, tools required, and safety warnings associated with the TS1162 side rails. Cutout dimensions: Per the TS1162 installation manual –
2.2 Panel Mount (Flush)
- Cutout dimensions: Per the TS1162 installation manual – typically 92x92 mm (for a 1/4 DIN size) or 45x45 mm.
- Insert the unit through the panel cutout.
- Attach the supplied mounting frame from the rear.
- Tighten screws evenly (torque: 0.5 Nm max) to avoid deforming the housing.
Common Mistake: Over-tightening panel screws can crack the TS1162’s front bezel, compromising its IP rating.
4.2 Initial Power-Up
- Apply power to the TS1162.
- Observe the display: It should show firmware version, then default mode.
- If the unit remains dark or shows error code “E-01”, power off immediately and check polarity.
Alternative – Manual Setup via App:
Open Canon PRINT app → Register Printer → Select “TS1162” → Enter your Wi-Fi password.
Security note: Change the default printer name if using in a shared office.
Final Recommendation
The TS1162 manual is a technical reference sheet rather than a step-by-step "how-to" guide. If you are comfortable with a trim removal tool and know how to use a fuse tap, the manual is perfectly adequate. If this is your first time modifying your car's interior, bookmark