Zclever Security Camera Manual -

: Connect your camera to a power source using the provided 12V adapter or USB cable. : Ensure your phone is connected to a 2.4GHz Wi-Fi network, as most security cameras do not support 5GHz. : Before starting, press and hold the Reset button

(often a small pinhole or a physical button) for about 5–10 seconds until you hear a prompt or see the lights flash. JustAnswer 2. App Installation zclever security camera manual

Download the appropriate app for your specific Zclever model: Clever Dog : Most common for standalone Wi-Fi cameras. : Often used for Zclever DVR/NVR systems. : Used for some wireless NVR kits. 3. Connection Steps (Standard Wi-Fi Setup) : Connect your camera to a power source

6. Key Features

6. Core Features & Operation

Outdoor Installation (Weatherproof Models)

• IP Rating: Most Zclever outdoor cameras are IP65 or IP66 (weather resistant).
• Height: Mount 8–10 feet above ground to prevent tampering.
• Angle: Tilt downward at 15–30 degrees.
• Waterproofing: If using the power extension cable, wrap the connection point with the provided waterproof tape or silicone seal. Insert the reset pin hole plug tightly.
• Avoid: Pointing directly at bright lights (causes washout) or busy streets (triggers false alerts).

Physical Mounting Steps:

1. Use the included drill template to mark holes.
2. Drill holes for wall anchors (for brick/concrete).
3. Screw the mounting base to the wall.
4. Attach the camera to the base and rotate to your desired angle.
5. Tighten the locking nut.