Alternatively, you can also try:
Make sure to select the correct driver for your printer model and operating system to avoid any compatibility issues.
To download and install the Xprinter XP-N160II driver for Windows 10, you should obtain the official "Xprinter Driver V7.77" or the latest POS printer driver from an authorized source. This 80mm thermal receipt printer requires specific software to enable its auto-cutter and high-speed printing features. Driver Download & Installation Steps Download the Software:
Visit the official Xprinter Technology website or authorized regional sites like Xprinter.by to locate the latest driver package, often listed as Driver V7.77 or POS Printer Driver. The download usually comes as a ZIP file. Extract the Files:
Right-click the downloaded ZIP folder and select "Extract All" using Windows 10 tools or software like WinRAR. Run the Setup:
Open the extracted folder and double-click the setup.exe file.
If a "User Account Control" prompt appears, click Yes to allow the installer to run. Configure Printer Settings:
Interface: Select USB if connected directly, or LAN for network setups.
Series/Model: Select XP-80 or the specific "Cut" series to ensure the auto-cutter functions correctly.
Port Check: Use the "Check USB Port" button within the installer to verify the connection. Finalize:
Click Install. Once finished, go to Settings > Devices > Printers & scanners in Windows 10 to confirm the printer is listed. Xprinter Xp-n160ii Driver Download Windows 10
Right-click the printer and select "Printer Properties" to print a test page. Connection Types for XP-N160II setup requirement USB
Plug-and-play after installing the driver; usually the most reliable for single-terminal POS. LAN (Ethernet)
Requires setting a static IP address using the Xprinter V3.0C utility. Wi-Fi
Configuration is done via USB first to input SSID and password using the setup tool. Troubleshooting Tips
Automatic Installation: Some Windows 10 versions may attempt to install a generic driver. If the printer doesn't cut or prints garbled text, manual driver installation is required.
Beep Indicators: For Wi-Fi models, three long beeps upon powering on indicate a successful network connection.
No "N160II" in List?: Use the XP-80 series driver if the exact model name is not visible in the dropdown menu; it uses the same core driver architecture.
Are you connecting your printer via USB, LAN, or Wi-Fi, and would you like specific steps for setting up a static IP?
Чековый термопринтер XPrinter XP-N160II с автообрезкой
To install the Xprinter XP-N160II Go to product viewer dialog for this item. Visit the official Xprinter website: You can search
on Windows 10, you need the official thermal printer driver package. This setup ensures your PC communicates correctly with the hardware via USB or Network interfaces. 📥 Official Driver Download
You can typically find the driver through these reliable channels:
Official Website: Visit the Xprinter Software Download page.
Driver Name: Look for "Xprinter Windows Receipt Printer Driver."
Compatibility: The current driver (v7.17 or newer) fully supports Windows 10 (32-bit and 64-bit). 🛠️ Installation Steps Follow these steps to get your printer running: Connect Hardware: Plug the into your PC via USB and turn it on.
Run Installer: Open the downloaded .exe file as an Administrator. Select OS: The installer should auto-detect Windows 10. Choose Interface: Select USB if connected directly. Select NET if using an Ethernet cable. Printer Series: Choose (or the generic "80mm Series") from the dropdown list.
Apply: Click "Install Now" and print a test page to confirm success. 🖨️ 💡 Troubleshooting Tips
Check Cables: Ensure the USB cable is firmly seated; try a different port if it isn't detected.
Port Settings: If it won't print, go to Control Panel > Devices and Printers, right-click the printer, select Printer Properties, and ensure the correct USB port (e.g., USB001) is checked.
Paper Size: Ensure your document is set to 80mm width to prevent cut-off text. Alternatively, you can also try:
Ensuring your Xprinter XP-N160II thermal receipt printer operates seamlessly on Windows 10
requires the correct driver installation to enable features like automatic paper cutting and multi-interface support. This guide provides a comprehensive overview of how to download and set up your device for optimal performance. Driver Download and Initial Setup To begin, you can obtain the official driver from the Xprinter Group website under their All Products section or specialized support portals like iposcomputer : Locate the POS 80 series or specific driver package. Extraction
: Since these files often come in a ZIP format, use software like
or the built-in Windows extractor to unpack the setup files. Hardware Connection
: Connect your printer via USB or LAN before running the installer. Ensure it is powered on; a blue ready light should indicate it is active. Installation Process for Windows 10
The installation steps vary slightly depending on your connectivity choice (USB vs. WiFi/LAN): xp n160ii driver | Xprinter
printmanagement.msc), restart, and reinstall using the official driver.There are two main versions of this printer: the USB Version and the Ethernet/LAN Version. It is important to identify which one you have before downloading.
Option 1: Official Xprinter Website (Recommended) The safest way to get the driver is directly from the manufacturer.
Option 2: Universal Driver (Alternative) If you cannot find the specific model, Xprinter often uses a "Universal Driver" for its 80mm series.
Tip: If you are unsure whether your Windows is 32-bit or 64-bit, right-click "This PC" on your desktop, select Properties, and look under "System type."
Getting the Xprinter XP-N160II driver installed on Windows 10 is straightforward once you have the correct files. By following the steps above, your thermal printer should be churning out receipts in no time.
If you are still facing issues, leave a comment below with your specific error message, and we’ll do our best to help!