Vmware Esxi 7.0 Update 3 Hpe Customized Iso Image Download |best| -
The HPE Customized VMware ESXi 7.0 Update 3 ISO is a specialized installation image designed to bridge the gap between standard VMware software and proprietary HPE server hardware. Unlike the generic "vanilla" image, this ISO integrates specific drivers and management tools necessary for the stability and monitoring of HPE ProLiant, Synergy, and Superdome Flex servers. The Critical Role of Customization
For modern enterprise environments, using a vendor-customized image is often mandatory rather than optional.
Hardware Enablement: New HPE servers (Gen9, Gen10, and Gen11) often use storage and network controllers that are not recognized by the standard VMware image. The HPE ISO includes these critical drivers, preventing installation failures.
Integrated Management Tools: The image pre-installs the Agentless Management Service (AMS) and HPE iLO drivers, allowing administrators to monitor hardware health, thermal status, and power consumption directly through the vSphere client or HPE OneView.
Performance Optimization: It includes specialized utilities like the SSACLI (Smart Storage Administrator CLI) for managing RAID arrays and the Smart Update Tool (iSUT) for firmware orchestration. Evolution of the 7.0 Update 3 Release
The lifecycle of ESXi 7.0 Update 3 was notably turbulent. In late 2021, VMware temporarily pulled the initial U3 release due to critical bugs. HPE followed suit, removing corresponding images from their repositories. Subsequent "re-released" versions of Update 3 (such as U3c and later) addressed these issues. Administrators are encouraged to use the latest available version—such as the February 2025 or September 2023 releases—and apply subsequent patches. How to Download the HPE ISO
Following Broadcom's acquisition of VMware, the download process has shifted from the old VMware Customer Connect portal to the Broadcom Support Portal. VMware ESXi Images for HPE Servers | HPE
To download the HPE Customized ISO image for VMware ESXi 7.0 Update 3, you must use the Broadcom Support Portal, as it has replaced the legacy VMware Customer Connect site. Due to Broadcom’s architecture, direct download links to specific images are no longer possible; you must navigate through your account entitlements. Download Steps from Broadcom Support Portal Follow these steps to locate the HPE customized image:
Access the Portal: Go to the Broadcom Support Portal and log in with your registered credentials. vmware esxi 7.0 update 3 hpe customized iso image download
Select Division: Click the dropdown next to your username and select VMware Cloud Foundation. Navigate to Downloads: Click My Downloads on the left-hand menu. Search for VMware vSphere in the search bar and select it.
Identify Entitlement: Choose the specific vSphere edition you are entitled to (e.g., VMware vSphere – Enterprise). Filter Version & Image: Select version 7.0 from the dropdown menu. Navigate to the Custom ISOs tab.
Search for "HPE" or "HPE Custom Image" to find the ESXi 7.0 Update 3 installer ISO.
Download: Accept the Broadcom EULA and click the download icon next to the desired deliverable. Alternative: HPE Support Center
You can also start your search on the HPE Support Center. While the page provides details for the HPE Custom Image for VMware vSphere 7.0 Update 3, clicking "Obtain Software" will typically redirect you back to the Broadcom portal for the actual file download. Important Notes for HPE Servers Download a Dell-Customised ESXi ISO
Here’s a professional social media and forum post tailored for VMware ESXi 7.0 Update 3 HPE customized ISO download. You can use it on LinkedIn, Reddit (r/vmware, r/homelab), or your internal IT team channels.
The Ultimate Guide to VMware ESXi 7.0 Update 3 HPE Customized ISO Image Download
Step 4: Locate the ESXi 7.0 Update 3 Customized Image
Scroll down to the "Drivers" or "Management Software" section. Look for an entry similar to:
VMware ESXi 7.0 Update 3 (HPE Customized Image) Release date: [December 2021 – March 2022 range] File name:
VMware-ESXi-7.0U3-19482537-HPE-700.U.03.10.5.6-March2022.isoThe HPE Customized VMware ESXi 7
💡 Tip: If you cannot find the exact U3 version, use the search term "ESXi 7.0 U3 HPE" in the support center search bar.
Issue 3: Download Speeds Are Very Slow
Solution: HPE throttles free downloads. Try between 00:00 – 06:00 UTC. Alternatively, use a download manager.
Step 5: Choose Download Method
HPE offers two typical download options:
- HTTP Direct Download – for single, local download.
- HPE SPP (Service Pack for ProLiant) Repository – if you need additional drivers or offline bundles.
For most users, the direct ISO download is sufficient.
Part 5: What’s Inside the HPE Customized ISO? (Technical Deep Dive)
For IT administrators who want to know exactly what they are deploying, here is the component breakdown:
| Component | Vanilla ESXi 7.0 U3 | HPE Customized ESXi 7.0 U3 |
|------------|----------------------|-------------------------------|
| SCSI driver (lpfc, qlnative) | Generic | HPE-tuned with async versions |
| Management agents | None | hp-ams (Agent Management Service) |
| iLO cooperation | Basic | Enhanced hponcfg and hptestevent|
| VIBs added | N/A | hpe-esxi-fc, hpe-smx-provider, hpe-nmi |
| Boot time | Standard | +5 seconds (due to agent injection)|
HPE also includes a special VIBs directory for post-install driver additions.
Option 2: Short & Actionable (Reddit / Forum / Slack)
Title: Where to download ESXi 7.0 U3 HPE custom ISO? The Ultimate Guide to VMware ESXi 7
Post:
If you're running HPE ProLiant servers, grab the ESXi 7.0 Update 3 HPE customized ISO directly from HPE’s site (NOT from VMware's default portal) to avoid missing drivers.
🔗 Direct download steps:
- 👉 https://myenterpriselicense.hpe.com → Software & Drivers
- Search your server → e.g., “DL380 Gen10”
- OS → “VMware vSphere 7.0”
- Find: VMware ESXi 7.0 Update 3 (HPE Customized Image)
- Download ISO (~500–600 MB)
Alternatively, from VMware Customer Connect – Partner Image section.
Current version example: ESXi 7.0 U3 build 20345601 (HPE custom) – check for latest patch.
⚡ Don’t forget to install the matching HPE vibs if upgrading from an older version.
#esxi7 #hpe #proliant