To update the firmware on a Vestel EVC04 Wallbox, you can use the Web User Interface (WebUI) or the Drive Green mobile application. Updating your firmware ensures access to new features and bug fixes. Method 1: Update via Web User Interface (Recommended)
This method is used for manual updates if you have the firmware file on your computer.
Access the WebUI: Connect your device (PC or tablet) to the same network as the charger. Open a web browser and enter the charger's IP address (default is often 192.168.1.1 or 192.168.0.10).
Log In: Use your admin credentials to sign in to the configuration interface.
Navigate to Maintenance: Go to the "System Maintenance" tab.
Upload Firmware: Locate the "Firmware Updates" section. Click the button to upload the firmware file from your PC.
Start Update: Click "Update". The charger's LED will turn constant red to indicate the process has started. vestel wallbox firmware update
Completion: The device will reboot once finished. On models with a display, a "Updating Firmware!" warning will appear during the process. Method 2: Update via Drive Green App
For chargers connected to the internet, updates can often be managed through the mobile app. EVC04 Ser es - ELECTRIC VEHICLE CHARGER
Updating your Vestel EVC04 Wallbox is essential for unlocking new features like Modbus TCP
support or improving system stability. Depending on your specific model and firmware version, you can update via the Drive Green Next mobile app How to Update Your Vestel Wallbox Via Web Interface (Recommended for v2.xx - v2.65)
Connect your laptop or phone to the charger’s Wi-Fi hotspot (stays active for 15 minutes after power-on). Open your browser and go to 192.168.1.1 Log in (default: or your custom password). Navigate to System Maintenance and look for the Software Update
Upload the firmware file and wait for the status LED on the box to indicate progress. Via Drive Green Next App Download the Drive Green Next app from the Apple App Store or Google Play Store. To update the firmware on a Vestel EVC04
Newer "Smart" versions are designed to receive updates through this app rather than manual PC uploads. Over-the-Air (OTA) Branded versions (like E.ON Drive
) may receive OTA updates automatically if connected to the internet. Key Version Highlights Version 2.77+ : Required for local management via Modbus TCP Version 3.118.0 : Fixes LED dimming bugs and improves connection stability. Important Precautions Avoid "Bricking"
: Never use firmware meant for a different hardware revision. Confirm your current version in the under "System Maintenance" before proceeding. Password Reset
: Updates from version 2.38 to 2.65+ often force a password change; you may need to set a new password with special characters to log back in.
: If the update stalls, a hard power reset (turning the fuse off and on) is often required to resume operation. Drive Green Next - App Store
I'll help you design a Vestel Wallbox Firmware Update feature. This feature would allow administrators or technicians to update the firmware of Vestel EVC30 / EVC40 series wallboxes either locally (via USB) or remotely (via cloud/OCCP). Update Methods Step 2: Locate Your Wallbox Device
On the dashboard, tap on your registered Vestel wallbox tile. It should show as “Online” (green dot). If offline, the update will not proceed.
Best for: Home users with the unit connected to Wi-Fi.
Most Vestel units support remote updates via the backend system.
Via the Vestel E-Cloud (or White Label App):
After installation, the wallbox reboots (usually 60-90 seconds). Once the LED returns to solid white or green, the update is complete.