Usb Device Id Vid 0951 Pid 1666 Link [repack] <LEGIT × 2025>
The USB Device ID VID 0951 PID 1666 refers to a specific hardware identifier for several popular Kingston Technology flash drives, most notably the DataTraveler 100 G3, DataTraveler G4, SE9 G2, and the 50 Kyson.
These identifiers are used by your operating system to recognize the manufacturer (VID) and the specific model (PID) to load the correct drivers. Identifying Your Device The ID breakdown is as follows:
VID (Vendor ID) 0951: Officially assigned to Kingston Technology.
PID (Product ID) 1666: Refers to a range of Kingston USB 3.0/3.1 Gen 1 mass storage devices.
You can verify these IDs on your own system by following these steps: Open Device Manager on your PC. Expand the Universal Serial Bus controllers section. Right-click your USB device and select Properties.
Under the Details tab, select Hardware Ids from the dropdown menu to see the VID_0951&PID_1666 string. Common Internal Hardware
While the external model might be a "DataTraveler 100 G3," the internal components can vary. Common configurations for this ID include: Controller: Often uses the Phison PS2251-19 or PS2251-07.
Flash Memory: Frequently features Toshiba TLC or similar NAND flash chips.
Performance: These drives typically support "Super Speed" (USB 3.x) with sequential read speeds often tested between 80-130 MB/s, though write speeds are significantly lower. flash drive becomes write-protected after failed sync
The USB device ID identifies a Kingston DataTraveler 100 G3 (DT100G3) USB flash drive
. This specific ID may also be shared by other closely related models like the Kingston DataTraveler SE9 G2 DataTraveler 50 DataTraveler Kyson depending on the specific firmware and internal controller. Deep Feature: Kingston DataTraveler 100 G3
is designed as a cost-effective entry point for users transitioning to USB 3.0 technology flash drive becomes write-protected after failed sync
How to Check VID/PID on Your System
- Windows: Device Manager → Universal Serial Bus devices → Right-click → Properties → Details → Hardware IDs
- Linux:
lsusbcommand (output will show0951:1666) - macOS: System Information → USB → Locate Kingston device
If you need a driver, firmware tool, or troubleshooting steps specific to this device, please provide your operating system and the exact issue (e.g., not recognized, wrong capacity, write-protected).
The USB device with VID 0951 and PID 1666 is a Kingston DataTraveler 3.0 flash drive. Specifically, this ID combination is common across several related models, including the DataTraveler 100 G3, G4, SE9 G2, and the DataTraveler Kyson. Key Device Information Manufacturer: Kingston Technology (Vendor ID: 0951). Product: DataTraveler 3.0 Series (Product ID: 1666).
Common Controller: Often uses the Phison PS2319 or PS2251-19 controller.
Interface: Supports USB 3.2 Gen 1 (also known as USB 3.0/3.1), with read speeds typically reaching up to 100–200 MB/s depending on the specific model and capacity. Drivers and Troubleshooting
Kingston DataTraveler drives are plug-and-play, meaning they do not require external driver downloads for modern operating systems like Windows, macOS, or Linux.
Official Support: You can find documentation and basic troubleshooting on the official Kingston Support page. usb device id vid 0951 pid 1666 link
Performance Data: For real-world benchmarks from other users, you can check the NirSoft USB Speed Test database.
USB Flash Drive Speed Tests - VID = 951, PID = 1666 - NirSoft
The USB hardware identifiers correspond to the Kingston DataTraveler 3.0 series. This ID is commonly shared across several popular Kingston Technology models, most notably the DataTraveler Generation 4 (G4) DataTraveler 100 G3 Device Profile: Kingston DataTraveler 3.0 (16GB)
This specific drive is a mid-range, portable storage solution designed for everyday file transfers. Model Identification Kingston DataTraveler G4 (often color-coded for the 16GB version). Performance Specifications
: USB 3.0 (compatible with USB 3.1 Gen 1 and backwards compatible with USB 2.0). Typical Speeds : Users commonly report read speeds around 30–75 MB/s and write speeds ranging from 5–15 MB/s Physical Features
: Features a large, colorful loop for key rings and a protective cap. Internal Hardware : Often utilizes a Phison controller
(such as PS2251-19 or PS2319) combined with Toshiba TLC flash memory. FreeFileSync VID = 951 (Kingston Technology), PID = 1666
The chip on Anya’s workbench was smaller than her pinky nail. Under the microscope, its laser-etched markings were faint but legible: 0951:1666.
To anyone else, it was just a controller chip for a Kingston DataTraveler microDuo 3C – a cheap, ubiquitous USB flash drive. But Anya knew better. Three months ago, this specific VID/PID signature had been found on a device that nearly melted down a power grid in Estonia.
She plugged the chip into her reader. The OS didn’t mount a drive. Instead, a single, raw endpoint appeared. No file system. Just a live, breathing serial pipe.
Her fingers flew across the keyboard. lsusb -v -d 0951:1666. The descriptor read back: “Kingston Technology DT microDuo 3C.” A perfect mimic. But the bInterval on endpoint 2 was wrong—it was set for 1ms, the timing of a keystroke injector.
“There you are,” she whispered.
She sent a probe: 0x5A, 0xA5. The device answered with a flood of data—a memory dump of its last host. Anya’s heart rate climbed. The dump contained partial credentials from a secured terminal at the Port of Rotterdam. Someone had walked in, plugged in what looked like a forgotten USB stick, and walked out. The stick did the rest.
VID 0951 PID 1666 wasn’t a storage device. It was a digital chameleon. When plugged into a Windows machine, it identified as a keyboard and typed a backdoor script in 300 milliseconds. On Linux, it became a network adapter and rerouted DNS traffic. On air-gapped systems, it masqueraded as a HID touchpad, slowly exfiltrating data via imperceptible mouse movements.
Anya isolated the chip in a Faraday cage and connected it to a sacrificial Raspberry Pi. As expected, the Pi recognized it as a standard mass storage device. A decoy. Anya ignored the phantom 64GB drive and instead sent a raw USB control transfer: bmRequestType = 0xC0, bRequest = 0x06, wValue = 0x1666.
The chip unlocked.
A hidden partition emerged, encrypted with a rolling XOR key based on the host’s CPU temperature and uptime. But Anya had prepared. She fed the chip a recorded signal—a perfect replay of the Rotterdam terminal’s thermal profile at the moment of compromise. The USB Device ID VID 0951 PID 1666
The partition opened. Inside: a single file named manifest.bin.
She ran it through her decoder. It wasn't code. It was a list of other VID/PID pairs – digital sleeper cells scattered across millions of innocent devices. Each one a ghost, waiting for a specific USB command to wake up.
Anya reached for her encrypted phone. The number for NATO’s Cyber Defense unit was on speed dial. But as she lifted the phone, the chip on her bench flickered its tiny status LED—a color not listed in its datasheet.
Then her screen changed.
A cursor moved on its own, smoothly, deliberately. It opened a text editor and typed six words:
YOU FOUND ME. NOW I FIND YOU.
The chip’s LED went dark. The VID 0951 PID 1666 device, for the first time, showed no signature at all. It was no longer a flash drive, a keyboard, or a ghost.
It was a door. And Anya had just turned the key.
The USB device identification VID 0951 and PID 1666 corresponds to the Kingston DataTraveler 100 G3 (and related models like the
). This is a widely used USB 3.0 flash drive produced by Kingston Technology. Device Information Vendor ID (VID): 0951 (Kingston Technology) Product ID (PID): Device Name: DataTraveler 100 G3 Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. / 50 Kyson Internal Controller: Often uses the Phison PS2251-19 (PS2319) or PS2251-07 (PS2307) controller. Useful Links
Official Product Support: Technical details and formatting guides are available on the Kingston Support Page.
Device Identification Database: View detailed hardware entries on DeviceHunt.
Performance Data: Crowdsourced read/write speed tests can be found on NirSoft USB Speed Tests. flash drive becomes write-protected after failed sync
This USB ID belongs to the Kingston DataTraveler Exodia (DTX) USB 3.2 Gen 1 flash drive. 🛠️ Technical Specifications VID (Vendor ID): 0951 (Kingston Technology) PID (Product ID): 1666 (DataTraveler Exodia / Generation 4)
Interface: USB 3.2 Gen 1 (Backwards compatible with USB 2.0)
Performance: Approximately 100MB/s read (varies by capacity) 🔍 Identification Context
This specific ID pair is common for the DataTraveler Exodia line, known for: Large Loop: Designed for easy attachment to keyrings. How to Check VID/PID on Your System
Cap Protection: Features a practical cap to protect the USB connector.
Color Coding: Capacities are often marked by the color of the loop (e.g., 32GB White, 64GB Teal, 128GB Yellow, 256GB Pink). 🔗 Drivers and Support
Standard Drivers: Uses the native USB Mass Storage Class driver.
OS Compatibility: Works automatically on Windows, macOS, Linux, and ChromeOS.
Formatting: Typically ships as FAT32 (for compatibility) or exFAT (for larger files). ⚠️ Common Troubleshooting If the device is not appearing under this ID:
Check Port: Ensure it is plugged into a blue (USB 3.0) port for best speed.
Disk Management: Check if the drive is "Unallocated" in Windows Disk Management.
Driver Update: Right-click "USB Mass Storage Device" in Device Manager and select "Update driver." To help you further, could you tell me: Are you trying to recover data from this specific drive?
Do you need help creating a bootable drive (like Windows or Linux) with it?
Are you seeing an "Unknown Device" error in your system settings?
2. Windows Generic Driver (Built-in)
Windows automatically installs the driver USBSTOR.SYS for this VID/PID. If your device is not working, you can manually force it:
- Right-click Start → Device Manager
- Find the unknown device with VID 0951 PID 1666
- Right-click → Update driver → Browse my computer for drivers
- Choose Let me pick from a list of available drivers → USB Mass Storage Device
No external link needed – the driver is inside C:\Windows\System32\drivers\.
🛠️ Why Are You Searching For This?
Most users search for a VID/PID link because they are experiencing driver issues. If you are seeing this ID in your Windows Device Manager, it usually means one of the following is happening:
1. "Unknown Device" or Code 10 Error If your computer recognizes the drive but cannot access it, or if it shows up as "Unknown Device" with the VID/PID shown in the properties, you likely have a corrupt driver stack.
- The Fix:
- Open Device Manager (Right-click Start > Device Manager).
- Find the drive (it may be under "Universal Serial Bus controllers" or "Disk drives").
- Right-click and select Uninstall device.
- Unplug the drive, restart your PC, and plug it back in. Windows will automatically reinstall the generic USB Mass Storage driver.
2. The Link is Dead (Cable/Port Issues) Sometimes the device shows up with this ID but refuses to mount (doesn't show up in File Explorer).
- Try a different port: Front panel ports on desktops often provide insufficient power. Try a rear motherboard port.
- Try a different PC: If the drive doesn't work on a second computer, the flash memory controller inside the stick may have failed.
3. Formatting Issues If the drive shows up in Device Manager but not in Explorer, it may have a corrupted partition table.
- The Fix: Use Windows Disk Management (
diskmgmt.msc) to see if the drive appears as "Unallocated" or "RAW." You can right-click the volume and create a New Simple Volume to reformat it.
Common Issues & Notes
- Some users report the device being detected but not showing a drive letter (often resolved via Disk Management reformatting)
- This PID is also used occasionally for Kingston’s DataTraveler SE9 G2 (though less common)
macOS
- Recognized as an external disk.
- No driver needed. If not visible, open
Disk Utilityand look for an unmounted volume.
