However, the 3010 strongly suggests an SMD LED package size:
3.0 mm × 1.0 mm (common for mid-power or indicator LEDs).
Here’s a practical guide to identifying and using a “tvzt-3010-03up” LED based on standard 3010 SMD characteristics.
Replacing a TVZT-3010-03UP LED requires careful handling. Warning: LCD panels are fragile and high voltages are present inside TVs. tvzt-3010-03up led
Power on the TV. Shine a flashlight at the screen. If you see a dim image, the backlight is dead. Open the chassis and locate the LED driver board. Use a multimeter to check for voltage output to the strip connector.
The TVZT-3010-03UP utilizes a standard SMD footprint with two metal contacts on the underside for reflow soldering. The compact size allows PCB designers to route traces easily underneath or around the component without crowding the board layout. However, the 3010 strongly suggests an SMD LED
The encapsulation resin often contains a diffusing agent to soften the light output, reducing "hot spots" in backlighting applications. The construction is robust, designed to withstand the thermal stresses of lead-free reflow soldering processes.
The TVZT-3010-03UP may be interchangeable with other strips under different part numbers. Look for these physical characteristics: Same physical length (e
Common equivalents include:
TVZT-3010-02DNLQ-3010-03UPHT-3010-3B4C-K3Rev-03 3010Always match the "3010" size and the "03UP" configuration number closely.
If you replace one TVZT-3010-03UP with a standard 3010 LED, the brightness mismatch will be visible. Your eye is extremely sensitive to luminance differences. Always buy the exact UP bin code.
This specific LED model is not typically found in general lighting (like household bulbs). Its design parameters are tuned for LCD panel backlighting. You will most likely encounter this component in: