Tuner Tv Tp P04 1220 00 00011 Full |work|

Based on the keyword string provided, here is generated content structured as a Technical Product Specification & Compatibility Guide. This content is designed to be useful for electronics technicians, spare parts sourcing, or an e-commerce listing.

Pin Configuration (Typical 10-pin or 13-pin)

A full spec sheet for the TP P04 series would show: tuner tv tp p04 1220 00 00011 full

  1. IF Out (Video + Sound mixed)
  2. AGC (Automatic Gain Control input, usually -0.5 to +4V)
  3. BT (Band Toggle / Band Switch Voltage)
  4. VT (V Tune – variable DC voltage for frequency selection)
  5. +5V or +12V (Power supply for the PLL and oscillator)
  6. GND (Ground)
  7. SDA (I²C Data line – if PLL controlled)
  8. SCL (I²C Clock line)
  9. NC (No Connection – or RF AGC output)
  10. RF Input (75 Ohm coaxial F-type or IEC type)

Part 9: Frequently Asked Questions

Q: Can I use a "TP P04" tuner from a Toshiba in a Sharp TV?
A: Possibly, if both are Vestel chassis and the tuner model number matches entirely. Pinout must be identical. Based on the keyword string provided, here is

Q: My TV has no picture but sound via HDMI – is tuner faulty?
A: No. Tuner only affects broadcast reception. If HDMI works, tuner may be fine; the issue is elsewhere. Pin Configuration (Typical 10-pin or 13-pin) A full

Q: Is this part repairable instead of replaceable?
A: Rarely. Inside is a ceramic hybrid + PLL IC. Only repairable if a capacitor is shorted or a pin resoldered.

Q: Why does the code have so many numbers?
A: It's a factory assembly code. The first 5-6 digits define electrical behavior; the rest are production tracking.

Troubleshooting & Diagnosis

If you are replacing the TP P04 1220 00 00011, you may be experiencing one of the following symptoms:

  1. No Signal: The TV displays "No Signal" even when a known good antenna cable is connected.
  2. Snow/Static: The screen shows heavy static (snow) on all channels.
  3. Channel Drift: The TV loses channel memory or fails to lock onto frequencies during auto-tuning.

Installation Notes