This file refers to a firmware package for the TP.SK513S.PB802
motherboard, a "three-in-one" smart TV mainboard commonly used in ONVO brand LED televisions and other similar generic Smart TVs. Board Overview & Performance
Hardware Specifications: The "1G-8G" in the filename indicates 1GB of RAM and 8GB of internal storage (eMMC), which is the standard entry-level configuration for these boards.
Operating System: Most variants of this board run Android 11, providing a smart interface for streaming and apps.
Resolution Support: This specific firmware is configured for 1920x1080 (Full HD) displays. Using it on a 1366x768 (HD) panel without adjustment may result in display distortion or a failure to boot.
Power Configurations: These boards typically come in two power versions: 65W or 48W, often used for 32" to 43" television models. Use Case & Reliability
Restoration Tool: This firmware is primarily used to fix "boot loop" issues where the TV is stuck on the Android logo or won't turn on.
Professional Requirement: Retailers like AliExpress and eBay explicitly warn that these boards and their firmware are for professional electronic technicians. Installation often requires adjusting screen parameters or swapping data chips.
File Structure: The .part3.rar indicates this is the third part of a split archive. You will need all parts (usually Part 1 and Part 2 as well) in the same folder to successfully extract the .bin or .img firmware file for USB installation. Technical Summary Specification Board Model TP.SK513S.PB802 Memory/Storage 1GB RAM / 8GB eMMC Native Resolution 1920 x 1080 Primary Brand Android Version Android 11
This blog post provides essential information and a guide for using the TP.SK513S.PB802
firmware file, specifically the "ONVO" variant with a 1920x1080 resolution and 1G/8G memory configuration. Troubleshooting Your Smart TV with TP.SK513S.PB802 Firmware
If your Smart TV is stuck on the logo, restarting constantly, or showing a blank screen, a firmware reinstallation is often the best solution. The specific file TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
is a segment of the full software package required to restore these boards. Board Specifications Main Board Model TP.SK513S.PB802 Resolution Support : 1920 x 1080 (Full HD) : 1GB RAM / 8GB Internal Storage Brand Variant Update Method : USB Upgrade Preparation Requirements
Before you begin, ensure you have downloaded all parts of the archive (Part 1, Part 2, and Part 3). Extracting the Files : Use a tool like WinRAR or 7-Zip. Right-click on TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
and select "Extract Here"; it will automatically pull data from the other parts to create the final firmware file. : Use a high-quality USB 2.0 drive formatted to Power Stability
: Do not turn off the TV during the update process, as this can permanently "brick" the mainboard. Step-by-Step Installation Guide Copy the extracted allupgrade_513_1G_8G_sos.bin
(or similarly named file) to the root directory of your USB drive. Turn off the TV and unplug it from the wall. Insert the USB drive into the TV's USB port.
Plug the TV back in. On most models, the update starts automatically, and the standby light will begin flashing rapidly. If it doesn't start, hold the Power Button
on the TV panel while plugging it in until the upgrade screen appears.
Wait for the progress bar to reach 100%. The TV will usually restart on its own. Once the "First Time Setup" appears, remove the USB drive. Important Notice
Firmware updates are risky. Always verify that your board model and panel resolution match exactly. Using the wrong firmware can result in an upside-down image, distorted colors, or a non-functional remote control. encountered during the TP.SK513S.PB802 update process?
The keyword TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar refers to a specific firmware file segment used to update or repair the ONVO Smart TV motherboard. This firmware is designed for the TP.SK513S.PB802 chassis, which typically runs Android 11 and supports Full HD (1920x1080) resolution with 1GB of RAM and 8GB of storage. Technical Specifications of TP.SK513S.PB802
This "three-in-one" motherboard integrates the power supply, LED driver, and TV mainboard into a single unit. It is widely used in budget Smart TVs like ONVO, Hartens, and Erisson. Operating System: Android 11 (some variants may vary). Memory: 1GB RAM / 8GB eMMC Storage.
Resolution Support: Default 1920x1080 (Full HD) for 75W configurations. Processor: Amlogic T950D.
Connectivity: Bluetooth, Wi-Fi, USB, HDMI, and LVDS for panel connection. Understanding the Firmware File
The filename indicates that this is the third part of a multi-part RAR archive. To use it, you must have all parts (e.g., part1, part2, and part3) in the same folder before extracting. Once extracted, you will typically find a .img or .bin file, such as allupgrade_aml950d4_an13_8G_1GB_70.img. How to Install the Firmware via USB
Updating the firmware is a delicate process often used to fix "boot loop" issues or "brick" states where the TV fails to start. This file refers to a firmware package for the TP
The file TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar is a specific part of a multi-volume archive containing the firmware for an Onvo Smart TV motherboard. This board is a common "three-in-one" Android TV motherboard used in various LED LCD televisions. Technical Specifications
According to the TP.SK513S.PB802 Instruction Manual, the board generally features: Operating System: Android 11. Memory/Storage: 1GB RAM and 8GB Internal Storage (EMMC).
Resolution Support: Configured for 1920x1080 (Full HD) as per your specific file name.
Voltage Support: Typically handles a wide range (34-110V) for backlight output. How to Use This File
Since this is "part3.rar," you cannot use it alone. You must follow these steps to extract and install the firmware:
Collect All Parts: Ensure you have downloaded all parts of the archive (e.g., part1, part2, and part3). They must all be in the same folder.
Extract the Firmware: Right-click on part1 and select "Extract Here" using a tool like WinRAR or 7-Zip. This will automatically pull data from all parts to create a single .bin or .img firmware file. Prepare the USB Drive:
Use a high-quality USB 2.0 drive (8GB or 16GB is usually best). Format it to FAT32.
Copy the extracted firmware file (often named all_upgrade_v513.bin or similar) directly to the root directory of the USB—do not put it in a folder. Installation Process: Turn off the TV and unplug the power cord. Insert the USB drive into the USB port of the TV.
Plug the TV back in. On many Onvo/TP.SK513S boards, the upgrade starts automatically, indicated by a blinking standby light or an on-screen progress bar.
Crucial: Do not turn off the power until the process is 100% complete. Important Warnings
Matching Resolution: Ensure your TV panel actually supports 1920x1080. Flashing 1080p firmware onto a 720p (1366x768) panel can result in a distorted image or a "black screen" state.
Professional Expertise: As noted in the TP.SK513S.PB802(N) Product Page, motherboard configuration should ideally be performed by a technician. Incorrect firmware can "brick" the board, making it unresponsive. Re-upload the part to a community forum (e
Do you have the part1 and part2 files, or are you seeing a specific error during the extraction or installation? AI responses may include mistakes. Learn more
This file appears to be the third part of a multi-volume RAR archive containing the USB firmware for a television using the TP.SK513S.PB802 motherboard. This specific firmware is tailored for brand TVs with a Full HD (1920x1080) resolution. Technical Specifications Based on the motherboard model and file naming convention: Main Board: TP.SK513S.PB802 (a common "three-in-one" Smart TV board). Resolution: 1920x1080 (Full HD). 1GB RAM and 8GB internal storage (eMMC). Typically runs Android 11 Specifically optimized for File Details Archive Type: Multi-part RAR (.part3.rar). You
have all preceding and succeeding parts (part1, part2, etc.) in the same folder to extract the firmware successfully. Source/Usage: Often found on repair forums like KenotronTV for recovering "bricked" TVs or fixing software loops. Standard Recovery Procedure If you are using this to repair a TV:
Ensure you have all parts. Extracting "part1" will automatically pull data from "part3" if they are together. Prepare USB: Format a USB drive to Place the extracted file (often named allupgrade_...pkg or similar) onto the root of the USB drive. With the TV unplugged, insert the USB. Hold the physical
button on the TV and plug in the power cord. The TV should enter an update mode (often indicated by a blinking LED).
Using firmware for the wrong panel resolution (e.g., trying to use 1080p firmware on a 720p panel) can result in a "black screen" or distorted image. Do you have the other parts of this archive, or are you looking for the full single-file version
Here’s a concise, structured review you can use for "TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar":
In the world of digital file management, encountering a file with a long, cryptic name like TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar is not uncommon — especially when dealing with firmware updates, embedded system backups, or large data dumps shared via file-hosting services.
This article explains what this file likely represents, how to use it, and how to recover data if it’s damaged or incomplete.
.part3.rar and Missing Other Parts?Without parts 1 and 2, full extraction is impossible. However, you may:
This is a leftover from a failed upload. The user uploaded part3, realized their internet died, and never finished. You have a digital ghost.
TP strongly suggests Touch Panel. SK513S and PB802 could be IC model numbers (e.g., from FocalTech, Goodix, or ILITEK). This file might contain firmware to calibrate or drive a 1080p USB touchscreen.
Place all .partX.rar files in the same folder. Do not rename them.
Example:
TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part1.rar
TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part2.rar
TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar