While there is no official Samsung release of Android 6.0.1 Marshmallow for the Galaxy Grand Prime (SM-G530H)
, you can still achieve this version through unofficial firmware and custom ROMs. Official vs. Unofficial Firmware Official support for the SM-G530H typically ended with Android 5.0.2 Lollipop
. To run 6.0.1, you must use unofficial builds developed by the community, such as those found on platforms like XDA Developers Popular 6.0.1 Firmware Options LineageOS 13.0
: One of the most stable unofficial versions of Android 6.0.1 for this model. CyanogenMod 13 (CM13)
: An older but functional ROM that provides the core Marshmallow experience. Ultima Android 6.0.1
: A TouchWiz-based custom ROM that mimics the official Samsung interface of newer devices. Requirements for Installation
Title: A mixed bag – brings some life to an old device, but don’t expect miracles
Rating: ⭐⭐⭐ (3/5)
I recently flashed the official SM-G530H firmware (Android 6.0.1) on my Grand Prime (XXU/XCU variant – make sure you get the right one!), and after a few weeks of use, here’s my honest take.
The Good:
The Bad:
Verdict: Flash this SM-G530H 6.0.1 firmware only if you’re stuck on Lollipop or lower and want a fresher interface. Don’t expect flagship performance. If you’re brave, a lightweight custom ROM (like Lineage 14.1) runs better. For everyday use? Consider a newer phone. For a backup or basic calling device? Yes, go for it.
Tip for noobs: Double-check your exact model (SM-G530H/DS, single-SIM, region) on SamFW or Updato. Wrong firmware = brick.
Samsung Galaxy Grand Prime (SM-G530H) Firmware Guide: Android 6.0.1 Marshmallow If you are looking to upgrade your Samsung Galaxy Grand Prime (SM-G530H)
to Android 6.0.1 Marshmallow, it is important to understand the official vs. unofficial software landscape for this legacy device. The Official Update Status Officially, the
reached its end-of-life at Android 5.0.2 Lollipop. Samsung did not release an official Android 6.0.1 update for the variant. While a newer model, the Galaxy Grand Prime Plus (SM-G532F)
, does run Android 6.0.1 natively, those firmware files are not compatible with the How to Get Android 6.0.1 (Custom ROMs) To run Marshmallow on an
, you must use Custom ROMs. These are unofficial software builds developed by the community to extend the life of the phone. Popular options include:
CyanogenMod 13 (CM13): One of the most stable early implementations of Android 6.0.1 for this device. LineageOS 13
: The successor to CyanogenMod, offering a clean, near-stock Android 6.0.1 experience.
TouchWiz-Based Port ROMs: Some developers have ported the Marshmallow software from newer devices like the Galaxy J5 to the Grand Prime Requirements for Installation
Before attempting to flash any firmware or custom ROM, ensure you have the following:
Based on your request, you are looking for the stock firmware content for the Samsung Galaxy Grand Prime (SM-G530H) running Android 6.0.1 Marshmallow.
Because firmware files are very large (usually over 1GB) and vary by region, it is not possible to upload the file directly here. However, I have compiled the complete details regarding file versions, features, and the specific download sources you need.
Short answer: No official Samsung release of Android 6.0.1 exists for the SM-G530H. sm-g530h firmware 6.0 1
Samsung officially stopped updates at Android 5.1.1 (Lollipop) for this device. If you see websites claiming “SM-G530H firmware 6.0.1 official,” they are either:
⚠️ Warning: Avoid any site asking you to install suspicious .exe files or pay for “premium firmware.”
BL.AP (this may take 10-20 seconds to load).CP.HOME_CSC (if you want to keep data – but a clean install is better) OR CSC (which will wipe data).Remember: If a website claims to have official Samsung 6.0.1 firmware for the SM-G530H, they are lying. Samsung never released it. Stick to trusted sources:
Have you flashed Android 6.0.1 on your Grand Prime? Share your experience in the comments — which ROM worked best for you?
Happy flashing, but always at your own risk! 🔧📱
Official firmware for the Samsung Galaxy Grand Prime (SM-G530H)
never reached Android 6.0.1 (Marshmallow). The final official operating system released by Samsung for this specific model was Android 5.0.2 Lollipop.
However, "6.0.1" is frequently associated with this device in community-developed custom ROMs or misidentified variants like the Grand Prime Plus. Official Firmware Status Latest Official Version: Android 5.0.2 Lollipop. Hardware Variants Go to product viewer dialog for this item.
has two main basebands—XXU (fortuna3g) and XCU (fortunave3g)—which require different firmware files.
Updates: Official updates can be checked via the device's Settings menu under "Software update". Unofficial Android 6.0.1 Options Users seeking Android 6.0.1 on the
must use custom firmware. Popular options found on enthusiast sites like XDA Developers include:
The Samsung Galaxy Grand Prime (SM-G530H) Go to product viewer dialog for this item.
does not have an official Android 6.0.1 Marshmallow firmware from Samsung. Officially, the device reached its end-of-life on Android 5.0.2 or 5.1.1 Lollipop. Any mention of 6.0.1 for this specific model typically refers to custom ROMs or builds for newer variants like the Grand Prime Plus (SM-G532F) Go to product viewer dialog for this item. Device Firmware Status
Official OS Range: Originally released with Android 4.4.4 KitKat, it was officially updated to Android 5.0/5.1.1 Lollipop. Marshmallow (6.0.1) Availability
: Only available through unofficial third-party development, such as CyanogenMod 13 or the Ultima ROM. Variant Note: The
is an international 3G variant (often referred to as "fortuna3g"). Unofficial 6.0.1 Installation Overview
If you choose to install an unofficial 6.0.1 firmware, you must use specialized tools and custom files.
The Samsung Galaxy Grand Prime (SM-G530H) does not have an official Android 6.0.1 Marshmallow stock firmware. The official software support for this model generally ended with Android 5.0.2 Lollipop. However, users can achieve Android 6.0.1 functionality through custom ROMs such as LineageOS 13.0 or CyanogenMod 13. Critical Pre-Installation Checks
Before attempting to install a 6.0.1 custom firmware, you must identify your device's specific baseband version: Fortuna3G: For Go to product viewer dialog for this item. with XXU baseband. Fortunave3G: For with XCU baseband.
Warning: Installing a ROM designed for a different codename can result in a permanent "hard brick" of your device. Popular Android 6.0.1 ROM Options
LineageOS 13.0: Regarded as the most stable custom build for the , providing a clean Marshmallow experience.
CyanogenMod 13 (CM13): An older but functional 6.0.1 port that often includes built-in theme engines for deeper customization.
Ultima ROM: A specialized custom ROM based on 6.0.1 developed by community members like TenSeventy7 on XDA Developers.
The Samsung Galaxy Grand Prime (SM-G530H) is a veteran of the mid-range smartphone market. While it officially peaked at Android 5.0.2 Lollipop for most regions, users searching for "sm-g530h firmware 6.0 1" are often looking to revitalize their device with the features and security of Android Marshmallow. Official Firmware Status While there is no official Samsung release of Android 6
Officially, the SM-G530H never received a global Android 6.0.1 Marshmallow update from Samsung. The latest official builds typically include: Version: Android 5.0.2 Lollipop. Latest Build: G530HXXS2BSB1 (Released around April 2019).
Where to find official files: If you need to restore your device to its factory state, you can download the official Lollipop firmware from repositories like Sammobile or IranMobile. How to Get Android 6.0.1 on SM-G530H
Since there is no official Marshmallow update, the only way to achieve this version is through Custom ROMs. Developers have ported versions of Android 6.0.1 and even higher (up to Android 11 via LineageOS) to this hardware. Popular ROM Options
CyanogenMod 13 (CM13): A classic Marshmallow-based ROM known for its stability and performance on older Samsung devices.
J5 Port ROMs: Some developers have ported the Marshmallow firmware from the Galaxy J5 (which shares similar hardware) to the Grand Prime. Installation Guide (Custom ROM)
Caution: Flashing custom firmware can brick your device and voids your warranty. Ensure you backup all data first. How to Install Android 6.0.1 Marshmallow On Galaxy S3 (4K)
Samsung Galaxy Grand Prime (SM-G530H) officially peaked at Android 5.0.2 Lollipop
. While Samsung never released an official Android 6.0.1 Marshmallow update for this specific model, users can achieve this version through custom ROMs 1. Official Firmware Status Max Official Version : Android 5.0.2 Lollipop. Latest Build G530HXXS2BSB1 (Released April 2019). Update Method : Official updates are handled via the Samsung Update menu in Settings or through Samsung Smart Switch 2. Marshmallow 6.0.1 Options (Custom ROMs)
Because there is no official 6.0.1 firmware, you must use unofficial builds to reach this version. Popular options include: CyanogenMod 13 (CM13)
: Based on Android 6.0.1, known for keeping core features like Wi-Fi and the camera functional. LineageOS 13
: The successor to CyanogenMod, providing a clean 6.0.1 experience. Resurrection Remix
: A feature-rich Marshmallow-based ROM often used for this model. 3. Installation Overview (Advanced Users)
Installing a custom 6.0.1 ROM requires several preparatory steps: How to Install Android 6.0.1 Marshmallow On Galaxy S5 (4K)
The Samsung Galaxy Grand Prime (SM-G530H) is a classic example of a mid-range device that outlived its official software support cycle through the power of the developer community. While Samsung officially capped this device at Android 5.0.2 Lollipop, the quest for Android 6.0.1 Marshmallow remains a popular topic for users looking to revitalize their hardware. The Official Support Ceiling
The SM-G530H was released with Android 4.4.4 KitKat and eventually received an official update to 5.0.2 Lollipop. Because of hardware limitations—specifically the 32-bit architecture of the Snapdragon 410 or Spreadtrum chipsets (depending on the region) and the modest 1GB of RAM—Samsung never released an official 6.0.1 Marshmallow OTA (Over-The-Air) update for this model. The Solution: Custom ROMs
To get 6.0.1 on an SM-G530H, you must look toward "Custom ROMs." The most stable and widely used version for this device is based on CyanogenMod 13 (CM13) or early versions of LineageOS. These community-built firmwares bridge the gap by porting Marshmallow’s features to the Grand Prime’s hardware. Key benefits of moving to 6.0.1 via Custom ROMs:
Doze Mode: Significant improvements in standby battery life.
Runtime Permissions: Better privacy control over what apps can access. App Drawer: A revamped, vertical-scrolling app list.
Adoptable Storage: The ability to "merge" your SD card with internal memory (crucial for a device with only 8GB of internal space). Installation Requirements
Upgrading a legacy device like the SM-G530H is a technical process that carries risks, including "bricking" the phone if steps are missed. The basic requirements include:
Unlocked Bootloader: Most SM-G530H variants allow this, though some carrier-locked versions might be restricted.
Custom Recovery: You must flash TWRP (Team Win Recovery Project) using a PC tool called Odin.
The Firmware Package: A .zip file of the Marshmallow-based ROM specifically built for the SM-G530H.
GApps: Since custom ROMs don’t come with Google services, a "Google Apps" package must be flashed separately to use the Play Store. Common Pitfalls Better UI & Features: Marshmallow feels much more
The SM-G530H has two main variants: the XXU (Snapdragon) and XCU (Spreadtrum) basebands. A common mistake is flashing firmware meant for one onto the other, which can result in a loss of cellular signal or a total device failure. Always verify your "Baseband version" in Settings before searching for a firmware file. Conclusion
While there is no "official" SM-G530H firmware for 6.0.1, the device is surprisingly capable of running Marshmallow through community builds. It breathes new life into the hardware, providing better security and modern app compatibility that the stock Lollipop firmware simply cannot offer.
Do you have the XXU or XCU version of the device, or would you like a list of reputable sources for the ROM files?
To update a Samsung Galaxy Grand Prime (SM-G530H) to Android 6.0.1, you generally have to use custom ROMs like LineageOS. Samsung never released an official 6.0.1 firmware for this specific model; it officially stopped at Android 5.0.2 (Lollipop). 🛠️ Essential Pre-Requisites Before starting, ensure your device is ready: Backup Everything: All data will be wiped. Charge Battery: Keep it above 70%.
Check Model: Go to Settings > About Device. It must be SM-G530H.
Unlock Bootloader: Enable "OEM Unlocking" in Developer Options. 📂 Required Files Since there is no "official" 6.0.1, you will need: TWRP Recovery: To flash the custom software.
Custom ROM: Search for "LineageOS 13.0 for SM-G530H" (based on 6.0.1).
GApps (OpenGApps): Choose ARM, 6.0, Pico to get the Google Play Store. Odin3: The PC tool used to install TWRP. 📲 Installation Steps 1. Flash TWRP Recovery
Put your phone in Download Mode (Power + Home + Volume Down). Connect to PC and open Odin. Put the TWRP .tar file in the AP slot. Click Start. 2. Wipe the Device Boot into TWRP Recovery (Power + Home + Volume Up). Select Wipe > Advanced Wipe. Select: Dalvik, System, Data, and Cache. Swipe to Wipe. 3. Install the 6.0.1 ROM
Connect to PC and transfer the ROM zip and GApps zip to your SD card. In TWRP, tap Install. Select the ROM zip first and flash it. Select the GApps zip and flash it. Reboot System.
🚀 Note: The first boot can take up to 10–15 minutes. Be patient! If you'd like to proceed, let me know:
Is your phone the XC (Spreadtrum) or XX (Snapdragon) version? Do you have a PC available to use Odin?
Official Android 6.0.1 Marshmallow firmware was never released for the Samsung Galaxy Grand Prime (SM-G530H)
. The final official update for this model typically stopped at Android 5.0.2 Lollipop However, you can achieve Android 6.0.1 through custom ROMs developed by the community. Available Options for Android 6.0.1 Ultima Android 6.0.1
: A popular custom ROM based on official Samsung firmware from other models, ported to work on the SM-G530H. LineageOS 13.0
: An open-source custom ROM that provides a clean, "stock" Android 6.0.1 experience. Critical Identification: XXU vs. XCU
Before downloading any custom firmware, you must check your device's Baseband version
(found in Settings > About Device). The SM-G530H has two incompatible hardware revisions: XXU (fortuna3g) : For older baseband versions. XCU (fortuneve3g) : For newer "VE" (Value Edition) hardware revisions.
Flashing the wrong version will result in a "bootloop" or hardware failure. How to Install (Overview)
: Ensure all data is saved, as this process wipes the device. Unlock & Recovery : You must install a custom recovery like : Transfer the custom ROM
file to your SD card, boot into TWRP, wipe the old system, and "Install" the new file.
: Custom ROMs often require a separate "OpenGApps" package to get the Google Play Store.
Detailed step-by-step guides and download links can be found on community forums like XDA Developers
A: Yes, but you risk a hard brick if you don't flash the correct bootloader. It's not recommended unless you are an expert.