I understand you're looking for a download link for Siemens ProTool V6.0 (often referred to as ProTool V60). However, I must provide some important context and guidance rather than a direct link.
If you have existing ProTool projects (.pdb files) that you need to maintain, the official Siemens solution is Migration.
You cannot download ProTool, but you can purchase a license for the modern software and convert your old projects:
Note: Migration is rarely 100% automatic. Scripts and certain proprietary drivers often need to be manually re-written.
A: 90% chance it is malware. 10% chance it is an ISO that will install but require a dongle you don't have. Do not waste your time.
If direct download links are what you're looking for, here are some tips:
Instead of searching for an unsafe, unofficial download (which risks malware or legal issues), I recommend:
If you need further help locating a legal source through Siemens' official channels, let me know and I can guide you on how to request it properly.
Siemens ProTool V6.0 is a legacy software that was officially discontinued in October 2010. As a result, Siemens does not provide a direct download for the full installation files on their official support site. Official Status and Updates
Official Portal: The Siemens Industry Online Support (SIOS) only offers Service Packs (SP1, SP2, SP3) and Hotfixes.
Requirement: These downloads are updates and typically require a pre-existing installation from an original CD to function. How to Acquire ProTool V6.0
Since the software is no longer sold or hosted for direct download, you have the following options:
Contact Sales: Your local Siemens Sales Partner may still have access to archival media or licenses.
Legacy Hardware: Check for original installation CDs that may have been bundled with older Simatic HMI hardware or Simatic S7 software packages.
Community Archives: A community-contributed version of Simatic HMI Pro Tool Pro 6.0 SP 3 is hosted on the Internet Archive, though use caution with non-official sources. Migration Recommendation
Siemens recommends migrating legacy ProTool projects to WinCC flexible or newer TIA Portal versions for better compatibility with modern operating systems. Protool/Pro CS V6.0 Software Download - SiePortal
Searching for a Siemens ProTool v6.0 download link can be frustrating because the software was officially discontinued in 2010. As an legacy HMI configuration tool, it has been superseded by newer software like WinCC Flexible and the TIA Portal. Availability and Download Status
No Official Download: Siemens does not provide a direct download for the full ProTool v6.0 software on its official SiePortal support site.
Service Packs Only: While you can find Service Packs (like SP1a or SP3) on the Siemens website, these are updates and do not include the base installation required to run the program.
Legacy Mediums: To get a full version, users are typically advised to contact a Siemens sales representative for a physical CD or search for used copies on online marketplaces.
Unofficial Archives: Some community members point to third-party repositories like the Internet Archive for legacy CD images, though these are not officially verified by Siemens. Compatibility & Performance Review Protool/Pro CS V6.0 Software Download - Siemens SiePortal
The official download for the full version of Siemens SIMATIC ProTool V6.0 is no longer hosted on the Siemens Industry Online Support (SIOS) website. Because the software is now legacy (replaced by WinCC flexible and later TIA Portal), Siemens only provides Service Packs (SP1, SP2, SP3) and hotfixes online, which require an existing installation or the original CD-ROM to function. 1. Official vs. Alternative Access
Siemens Industry Online Support (Official): You can download Service Pack 3 (SP3) for ProTool V6.0 directly from the Siemens Support Portal. Note: You must have the original CD or an older version already installed to apply this update.
Sales Partner: For the original basic version installation files, Siemens recommends contacting your local Siemens Sales Partner.
Community Archives: Unofficial copies of ProTool Pro 6.0 SP3 have been hosted by third parties like the Internet Archive. Use these with caution as they are not officially verified. 2. System Compatibility & Installation Compatibility Details Operating Systems
Windows 98 SE, ME, NT 4.0 (SP6a), 2000, and XP Professional. Windows 7/10
Not officially supported, but can sometimes be installed in Compatibility Mode (set Setup.exe to Windows XP SP2/SP3). STEP 7 Integration
ProTool V6.0 SP3 supports STEP 7 versions 5.1 SP4 through 5.3. 3. Migration: The Modern Alternative
If you are unable to source ProTool, the industry standard is to migrate the project to WinCC flexible 2008 SP2/SP3, which includes a migration tool for .pdb files. Protool/Pro CS V6.0 Software Download - Siemens SiePortal
Unlocking the Power of Siemens Protool V60: A Comprehensive Guide to Downloading and Utilizing the Software
In the realm of industrial automation and process control, Siemens has established itself as a leading player, providing cutting-edge solutions that cater to diverse industries. One such solution is Siemens Protool V60, a powerful software tool designed to facilitate the configuration and parameterization of Siemens' range of HMI (Human-Machine Interface) devices. This article aims to provide an in-depth exploration of Siemens Protool V60, focusing on the elusive download link, features, and applications.
Introduction to Siemens Protool V60
Siemens Protool V60 is a software package developed by Siemens to enable users to efficiently configure, program, and commission their HMI devices. The software offers a user-friendly interface that simplifies the process of creating and editing project files, setting up communication protocols, and designing user interfaces. Protool V60 supports a wide range of Siemens HMI devices, including the popular OP, TP, and MP series.
Features and Benefits of Siemens Protool V60
The software boasts an impressive array of features that make it an indispensable tool for engineers, technicians, and developers working with Siemens HMI devices. Some of the key benefits include:
Obtaining Siemens Protool V60: The Download Link
The quest for the Siemens Protool V60 download link can be a challenging and frustrating experience, especially for those who are new to Siemens' software offerings. However, after conducting an extensive search, we have managed to provide a direct link to download Siemens Protool V60:
Download Link: [Insert Download Link]
System Requirements and Installation
Before proceeding with the download and installation of Siemens Protool V60, ensure that your system meets the minimum requirements:
To install Protool V60, follow these steps:
Activation and Licensing
Siemens Protool V60 requires activation and licensing to function fully. The software uses a USB dongle or a software-based license key to validate the installation. To activate your copy, follow these steps:
Tips and Tricks for Effective Use of Siemens Protool V60
To maximize your productivity and efficiency when working with Siemens Protool V60, consider the following tips:
Conclusion
Siemens Protool V60 is a powerful software tool designed to simplify the configuration and parameterization of Siemens HMI devices. By providing a direct download link and comprehensive guide, we aim to empower engineers, technicians, and developers to unlock the full potential of Protool V60. Whether you're a seasoned professional or new to Siemens' software offerings, this article has provided valuable insights into the features, benefits, and applications of Protool V60. siemens protool v60 download link
FAQs
Q: What is the latest version of Siemens Protool? A: The latest version of Siemens Protool is V60.
Q: Can I download Siemens Protool V60 for free? A: Siemens Protool V60 is a commercial software package and requires a valid license for use.
Q: What are the system requirements for Siemens Protool V60? A: The system requirements include Windows 10, Windows 7, or Windows XP, Intel Core 2 Duo or equivalent, 2 GB RAM or more, and 2 GB hard drive space or more.
By following this guide and utilizing the provided download link, you'll be well on your way to harnessing the power of Siemens Protool V60 to optimize your HMI device configurations and industrial automation projects.
An official full version download link for Siemens SIMATIC ProTool V6.0
is no longer available because the software was officially discontinued on October 1, 2010.
While the full installation software cannot be downloaded from the Siemens website, they still provide Service Packs and Updates for existing users. How to Access ProTool V6.0
Since the software is "legacy," obtaining it requires a physical copy or a specialized support request: Check for the Original CD
: Siemens documentation states that you must have the original CD-ROM (or Disk 1) to install the base software before applying downloadable updates. Contact Siemens Sales : You can reach out to a Siemens sales partner or office
to request access to legacy media, though this is subject to their current internal support policies. Third-Party Marketplaces
: Some users find original installation media on online marketplaces for legacy industrial hardware. Modern Replacement : Siemens replaced ProTool with SIMATIC WinCC flexible
, which includes migration tools to convert ProTool projects into a modern format. Siemens SiePortal Available Downloads (Service Packs)
If you already have the base version (V6.0, V6.0+SP1, or V6.0+SP2) installed or have the CD on hand, you can download the following updates from the Siemens Industry Online Support (SIOS) Protool/Pro CS V6.0 Software Download - SiePortal
Siemens ProTool V6.0 is a legacy configuration software for SIMATIC HMI panels. It has been officially replaced by WinCC flexible and subsequently WinCC (TIA Portal) 📥 Download Information no legal "full installer" download
available for free. Siemens treats the base software as a licensed product that must be purchased or found on original CD-ROMs. Official Support Site: You can download Service Packs and Hotfixes directly from the Siemens Industry Online Support (SIOS) Prerequisite:
You must already have the base version (V6.0) installed or the original installation media (CD/Diskette) to apply these updates. Trial Versions:
Siemens does not currently offer a trial download for this obsolete version. 📝 Software Review: Siemens ProTool V6.0
ProTool was the industry standard for HMI programming in the late 90s and early 2000s. While dated, it remains essential for maintaining older "Line" and "Graphic" panels. ⭐ Key Features Broad Device Support:
Configures older OP, TP, and MP series panels (e.g., OP7, OP17, TP270). Step 7 Integration:
Seamlessly integrates into the SIMATIC Manager project tree for easy tag synchronization. Versatility:
Available in Lite, Pro, and Pro/Pro Runtime versions to suit different hardware scales. Ultra-Reliable: Stable for legacy hardware maintenance. Low Overhead: Runs efficiently on older hardware/VMs. Simplicity:
Straightforward tag-based configuration compared to modern, bloated suites. Compatibility: Strictly requires Windows XP or Windows 2000
. Running it on Windows 10/11 requires complex workarounds or Virtual Machines.
No new features; Siemens has discontinued all support for the platform. Hardware Locked: Cannot be used for modern Comfort or Basic panels. 🛠️ Important Compatibility Note If you are trying to run ProTool on a modern PC: VirtualBox Windows XP Professional Step 7 V5.x first if you need project integration. Ensure you have a physical RS232/PPI adapter or a compatible for panel communication. If you are starting a new project, do not use ProTool . Transition to WinCC (TIA Portal)
, which includes migration tools to bring old ProTool projects into the modern ecosystem. Downloads for ProTool/Lite, ProTool, ProTool/Pro V6.x - ID
I can’t provide or link to pirated software or direct downloads for proprietary programs. However, I can give a useful, lawful essay covering what Siemens ProTool v6.0 is, legitimate ways to obtain it, alternatives, and safety/legal considerations.
What Siemens ProTool v6.0 is
Why people look for ProTool v6.0
Legitimate ways to obtain or access ProTool v6.0
Alternatives and migration options
Technical and compatibility notes
Legal and security considerations
Practical steps to proceed (recommended)
If you want, I can:
Which of those would you like?
(Invoking related search suggestions.)
Siemens ProTool V6.0: Everything You Need to Know Siemens ProTool V6.0 is a legacy software package used for the configuration and visualization of Human Machine Interfaces (HMIs). While it is no longer the standard for modern industrial automation, it remains essential for maintaining older machinery that utilizes SIMATIC panels. Important: Official Download Availability
There is no official full-version download for Siemens ProTool V6.0 available on the public Siemens website. The software was officially discontinued on October 1, 2010, and all upkeep activities have ceased.
If you are looking for a download link, you should be aware of the following:
Service Packs Only: Siemens provides free downloads for Service Packs (like SP1a, SP2, and SP3) for customers who already own the original software.
Original Media Required: To install these service packs, you must already have the original ProTool V6.0 CD-ROM or Disk 1.
Official Support: For a replacement copy of the full software, you must contact your local Siemens Sales Representative. Key Features and Service Packs
ProTool V6.0 saw several updates during its lifecycle to expand device support and operating system compatibility. Protool/Pro CS V6.0 Software Download - Siemens SiePortal
The tale of the Siemens ProTool V6.0 download link is more of a quest for an ancient relic than a simple internet search. In the world of industrial automation, ProTool was once the king of HMI (Human Machine Interface) configuration, but that era ended long ago. The Legend of the Lost Software
The year is 2026, and you’re tasked with reviving a piece of machinery from the early 2000s. To talk to its aging display, you need the legendary Siemens ProTool V6.0. You head to the Siemens SiePortal, the official hall of records, only to find the gates barred. The software was officially discontinued in 2010, making a direct download link for the full original version almost impossible to find on official channels. The Service Pack Mirage I understand you're looking for a download link
In your search, you find a glimmer of hope: Service Pack 3 (SP3) for ProTool V6.0. It sits right there on the Siemens Support site. But as you reach for it, you realize the cruel twist: it’s an update, not the full installer. You still need the original CD-ROM to make it work. The Wise Sages' Advice
You consult the "Sages" of the Siemens Forum, who tell you that the true path forward isn't looking for a link, but reaching out to your local Siemens Sales Representative. They might still hold a copy of the "ancient discs" in a dusty drawer. Alternatively, they might point you toward WinCC flexible, the chosen successor that can sometimes import those old ProTool projects. The Final Chapter Your journey ends with a choice:
The Official Path: Contact Siemens directly to see if they can provide a legacy copy for a fee or as a courtesy.
The Migration Path: Transition your project to WinCC flexible, leaving the ghosts of ProTool behind for a more modern (though still vintage) solution.
Are you trying to recover a project from an old panel, or are you looking to set up a new station for legacy support? Protool/Pro CS V6.0 Software Download - Siemens SiePortal
I’m unable to provide direct download links for Siemens ProTool V60, as Siemens typically requires a valid license, a customer login to the Siemens Industry Online Support (SIOS) portal, or an active software service agreement to access legacy software.
However, I can help you write a blog post that explains where and how to legitimately obtain ProTool V60, and what alternatives or considerations you should keep in mind.
Title: Where to Find a Legit Siemens ProTool V60 Download Link (And What to Know Before Installing)
Introduction
If you’re maintaining older Siemens HMI panels (like OP, TP, or MP series from the late ’90s to mid-2000s), you’ve likely searched for “Siemens ProTool V60 download link.” Originally released as a configuration tool for Windows 95, 98, NT, and 2000, ProTool V60 is now considered legacy software. Here’s how to get it legally and safely.
Can You Still Download ProTool V60 from Siemens?
Yes, but not directly from a public “download now” button. Siemens moved most legacy software to their Industry Online Support (SIOS) portal, accessible after a free registration. Search for “ProTool V60” there; you may find service packs, updates, or reference materials. Full installers often require a valid license key or proof of purchase.
Official Ways to Obtain ProTool V60
Why You Should Avoid Unofficial Download Sites
Sites claiming “Siemens ProTool V60 free download full version” often bundle malware, keyloggers, or corrupted files. Worse, running unverified legacy software on modern Windows can crash your system or damage panel communication.
Modern Alternatives
Final Advice
Only download ProTool V60 from Siemens or a verified industrial software reseller. If you just need to convert an old project, consider using WinCC Flexible’s migration tool instead.
Draft Guide: Siemens ProTool V6.0 Download Link
Introduction
Siemens ProTool is a popular software tool used for configuring and programming Siemens HMI (Human-Machine Interface) devices. ProTool V6.0 is an older version of the software, but still widely used in various industries. In this guide, we will provide a step-by-step approach to downloading Siemens ProTool V6.0, along with some essential information and precautions.
Pre-Download Information
Before downloading Siemens ProTool V6.0, please note:
Official Siemens Download Link
The recommended way to download Siemens ProTool V6.0 is through the official Siemens website:
Alternative Download Sources
If you're unable to access the official Siemens website or prefer a third-party source, use caution and only download from reputable websites. Some popular alternative sources include:
MD5 Checksum Verification
To ensure the integrity of the downloaded file, verify the MD5 checksum:
Post-Download Installation
After downloading Siemens ProTool V6.0, follow these general installation steps:
Conclusion
This draft guide provides a basic outline for downloading Siemens ProTool V6.0. When downloading software, prioritize official sources and exercise caution when using third-party websites. Always verify the integrity of the downloaded file using MD5 checksum verification. If you're unsure about any step or encounter issues, consult the official Siemens documentation or contact their support team.
Disclaimer: This guide is for informational purposes only and is not affiliated with Siemens or any other company. Use this guide at your own risk.
SIMATIC ProTool v6.0, a legacy HMI configuration software from Siemens, is officially discontinued and no longer available for direct full-version download from Siemens.
While the official Siemens Industry Online Support (SIOS) portal provides updates, service packs (like SP3), and hotfixes for existing users, it does not host the full installation files. Availability & Download Options
Official Updates: Existing owners of ProTool v6.0 can download Service Pack 3 (SP3) for free. This update requires an existing installation or the original CD-ROM to function.
Full Installation: For a complete new installation, Siemens recommends contacting a local sales representative to inquire about legacy media or licenses.
Third-Party Archives: Community archives like the Internet Archive host ISO files for legacy software, though these are not officially verified by Siemens. Key Features of v6.0 SP3
Broad Device Support: Compatible with older Siemens hardware including SIMATIC C7-636 and various text or graphic-based panels.
Integration: Supports SIMATIC STEP 7 versions 5.1 through 5.3.
OS Compatibility: Officially released for Windows 98 SE, NT 4.0, 2000, and XP Professional. Users have reported limited success running it on Windows 7 or 10 using XP Compatibility Mode or virtual machines.
Enhanced Data Handling: SP3 increased the number of configurable array elements to 5,000 and added support for FLOAT multiplex tags. Migration Path
Because ProTool is end-of-life, Siemens has replaced it with newer platforms: Pro Tool V6.0 SP3 + WINDOWS 7 - SiePortal
The program(s) should install with no problem. Not sure how it will work as I haven't tested the install. But, it will install. .. Siemens SiePortal
Siemens SIMATIC ProTool v6.0 is a legacy engineering software used to configure a wide range of SIMATIC operator panels and HMI (Human Machine Interface) devices. While it has since been replaced by SIMATIC WinCC Flexible and later the TIA Portal, many industrial automation engineers still require ProTool to maintain, modify, or upload projects from older machinery.
Finding a reliable download for ProTool v6.0 can be challenging because Siemens has officially moved the product into the "discontinued" phase of its lifecycle. The History and Purpose of Siemens ProTool v6.0
ProTool was the primary configuration tool for Siemens HMI systems throughout the late 1990s and early 2000s. It was designed to program: Text Displays (TD): Such as the TD17.
Operator Panels (OP): Including the OP3, OP7, OP17, and OP27. Multi Panels (MP): Like the MP270 or MP370. Touch Panels (TP): Including the TP170 and TP270.
The version 6.0 (specifically v6.0 SP2 or SP3) was the most stable and final evolution of the software before Siemens transitioned users to WinCC Flexible. Understanding Siemens Licensing for Legacy Software Note: Migration is rarely 100% automatic
Before searching for a download link, it is crucial to understand that ProTool is licensed software. Even though it is considered "abandonware" by some in the community, it is still protected by Siemens' intellectual property rights.
Trial vs. Full Version: Siemens rarely offered "trial" versions of ProTool. Most downloads you find are the full installation files that require a valid License Key (usually provided on a yellow floppy disk or a USB transfer).
Compatibility: ProTool v6.0 was designed for Windows 98, Windows NT, and Windows XP. Running it on Windows 10 or Windows 11 usually requires a Virtual Machine (VM) running Windows XP. Where to Find the Siemens ProTool v60 Download Link
Because Siemens no longer hosts ProTool v6.0 on its primary public-facing servers for direct download, you have three main avenues to acquire the software: 1. The Siemens Industry Online Support (SIOS) Portal
The safest way to acquire legacy software is through official Siemens support. If you have an existing support contract or can prove ownership of a previous license, you can request a download through the SIOS portal. Search for: "SIMATIC ProTool/Pro V6.0 Service Pack"
Note: You may need an "Export-restricted" account to download older industrial software. 2. Industrial Automation Forums and Archives
Many PLC and HMI engineers share archived versions of software on community forums. Websites like PLC-Forum, Control.com, or MrPLC often have threads dedicated to legacy Siemens tools.
Pros: Often includes helpful installation tips for modern OS.
Cons: Files are hosted on third-party sites (like Mega or MediaFire), which may carry security risks. 3. Purchasing Original Media
If you are working in a corporate or regulated environment, downloading from unofficial links is often prohibited. In these cases, your best bet is to look for "New Old Stock" (NOS) on secondary markets like eBay. Look for the original CD-ROMs, which often include the Service Packs needed for XP compatibility. System Requirements and Installation Tips
If you manage to secure a download, follow these steps to ensure the software actually works:
Use a Virtual Machine: Do not try to install ProTool directly on Windows 10. Use VMware or VirtualBox to set up a Windows XP Professional (SP3) environment.
Integration with Step 7: ProTool v6.0 can be integrated into SIMATIC Step 7 v5.x. This allows you to manage the PLC hardware and HMI screens within the same project tree.
Communication Drivers: Ensure you have the correct drivers for your communication cable (e.g., PC Adapter USB, MPI, or Profibus). Why You Might Need WinCC Flexible Instead
If your goal is to migrate an old project to a new panel, you might not need ProTool at all. Siemens WinCC Flexible 2008 has a built-in migration tool that can open ProTool .pdb files and convert them to the WinCC format. However, you must have ProTool installed on the same machine as WinCC Flexible for the migration bridge to function.
Are you trying to upload a program from an old panel or create a new one?
Do you currently have an original license key or a yellow license disk?
What Operating System are you planning to run the software on?
Knowing these details will help me guide you to the most stable configuration for your specific hardware.
Returning to the original keyword – "siemens protool v60 download link" – you now know the truth. There is no safe, legal, public link. The software is dead; only the installed base remains.
Your strategic action plan:
Automation is about reliability. Using an unofficial download from a Russian forum to keep a production line running is a business risk, not a solution. Bite the bullet, invest in a migration, and leave ProTool V60 in the history books where it belongs.
Need further help? Visit the official Siemens Industry Online Support and search for entry ID 57345350 (Migration from ProTool to WinCC flexible).
Disclaimer: This article is for informational purposes. The author does not host or distribute Siemens software. Always obtain software licenses directly from Siemens AG or authorized distributors.
Siemens ProTool v6.0 is a legacy software that has been officially discontinued and replaced by SIMATIC WinCC flexible. Because it is no longer actively sold or supported by Siemens, finding a direct, official download link can be difficult.
Here are the most common ways to acquire or handle ProTool v6.0 today:
Official Siemens Industry Online Support (SIOS): Siemens typically does not provide a direct public download for the full ProTool installer due to licensing. However, you can often find Service Packs (SPs) and updates on the Siemens Support Portal. You usually need an existing installation or a valid license key to use these.
Physical Media: Since this is older software, many users still rely on the original CD-ROMs. If you are working in an industrial environment, check your company's software archive for the original "SIMATIC ProTool/Lite", "ProTool", or "ProTool/Pro" discs.
Upgrade Path: If you are trying to open an old ProTool project, Siemens recommends using WinCC flexible 2008 SP2/SP3/SP5. WinCC flexible includes a "Migration" tool that can convert ProTool .pdb files into a format compatible with modern systems.
Third-Party Archives: While some PLC programming forums (like PLC Forum or MrPLC) may have user-shared links, exercise extreme caution. Downloading industrial software from unofficial sources carries significant security risks for factory floor hardware.
Key Technical Note:ProTool v6.0 was designed for Windows 98, NT, and XP. If you manage to find the installer, you will likely need a Virtual Machine (VM) running Windows XP Professional SP3 to get it to install and communicate with hardware correctly.
Are you trying to migrate an old project to a newer panel, or do you specifically need to edit an existing ProTool runtime?
ProTool v6.0 is a legacy HMI (Human Machine Interface) configuration software that was officially discontinued in October 2010
. It is no longer actively supported or directly available for full download from official Siemens channels, as it has been succeeded by WinCC flexible TIA Portal Download and Availability
Finding a legitimate "download link" for the full base version is difficult because Siemens primarily provides updates and service packs online, not the original installation media. Official Source: Siemens provides free downloads for Service Pack 3 (SP3)
and various hotfixes, but these require an existing installation or the original product CD-ROM to work. Full Version:
To obtain the original base software, Siemens recommends contacting your local Siemens Sales Partner Third-Party: While sites like the Internet Archive
may host files, these are not official and should be used with caution for professional automation. Compatibility & System Requirements
ProTool v6.0 is designed for older operating systems and may struggle on modern hardware without virtualization. Pro Tool V6.0 SP3 + WINDOWS 7 - SiePortal - Siemens
Important Notice Regarding Siemens ProTool V6.0
If you are searching for a download link for Siemens ProTool V6.0, it is important to understand the current status of this software regarding availability, licensing, and compatibility.
Visit Siemens Industry Online Support: Go to https://support.industry.siemens.com/.
Search for ProTool: In the search bar, type "ProTool" and press Enter.
Select the Correct Version: From the search results, locate ProTool V6.0. Ensure it's the correct version you need.
Download: Click on the result that matches your search. You might need to log in with a My Siemens account or register if you don't have one. Follow the prompts to download.
I can't provide direct download links due to the dynamic nature of Siemens' website and the potential for links to change. However, the steps above should guide you through finding and downloading Siemens ProTool V6.0 safely and legally.
