Samsung N7100 Root File 4.4.2 Download Repack May 2026
To root your Samsung Galaxy Note 2 (N7100) Go to product viewer dialog for this item.
running Android 4.4.2 (KitKat), the most common and reliable method is using CF-Auto-Root combined with the Odin flashing tool. 📥 Essential Download Files You will need to download these files to your Windows PC:
CF-Auto-Root for N7100: Look for the specific package CF-Auto-Root-t03g-t03gxx-gtn7100.zip from trusted developer sites like Chainfire's CF-Auto-Root.
Odin3 v3.09 or newer: This is the software used to flash the root file to your device.
Samsung USB Drivers: Essential for your PC to recognize the phone; typically available through Samsung's official support site or by installing Samsung Kies. 🛠️ Preparation Steps
Enable USB Debugging: Go to Settings > About Device and tap Build Number seven times. Then go to Developer Options and check USB Debugging.
Battery Charge: Ensure your phone has at least 80% battery to prevent it from turning off during the process.
Backup Data: Rooting can occasionally fail or require a factory reset; back up your important photos and contacts first. 🚀 Rooting Procedure
Extract Files: Unzip the CF-Auto-Root and Odin packages on your desktop. You should see a .tar.md5 file. Enter Download Mode: Turn off the phone.
Press and hold Volume Down + Home + Power buttons simultaneously.
When the warning screen appears, press Volume Up to continue.
Connect to PC: Open Odin as an administrator and connect your phone via USB. A blue or yellow box should appear under ID:COM, indicating a successful connection. Flash the File: Click the AP (or PDA in older Odin versions) button. Select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file.
Ensure only Auto Reboot and F. Reset Time are checked in the options tab.
Start: Click Start. The phone will flash the file and reboot automatically. Once Odin shows a green "PASS!" message, you can unplug the device.
💡 Verification: After the reboot, look for the SuperSU app in your app drawer. You can also download a "Root Checker" app from the Play Store to confirm access is granted. How to root Galaxy Note 2 running Android 4.4.2 Kitkat samsung n7100 root file 4.4.2 download
Samsung Galaxy Note 2 (GT-N7100) Android 4.4.2 KitKat , the most common and verified method uses CF-Auto-Root flashed via
on a Windows PC. This process provides superuser access but will void your warranty and may trigger the Knox security counter. Required Files & Downloads Odin Flashing Tool : Use versions such as Odin3 v3.09 Root Package : The specific file for the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 Samsung USB Drivers Samsung Kies
or the standalone Samsung Mobile USB Driver to ensure the PC recognizes the device. Step-by-Step Rooting Procedure Prepare the Device Enable USB Debugging Settings > About Device Build Number seven times. Then, in Developer Options USB Debugging Charge Battery : Ensure the phone has at least 80% charge to prevent power failure during flashing. Backup Data
: Although this method typically does not erase data, a full backup is strongly recommended. Enter Download Mode Power off the device. Press and hold Volume Down + Home + Power buttons simultaneously. When the warning screen appears, press to continue into Download Mode. Flash the Root File on your PC as an Administrator. Connect the to the PC via USB. A blue or yellow indicator in the box confirms a successful connection. ) button and select the CF-Auto-Root...tar.md5 Auto-Reboot F. Reset Time are checked, and Re-Partition
. The phone will reboot once the process is complete and a green message appears in Odin. Verification Look for the app in your app drawer. Download a Root Checker app from the Play Store to confirm access. Alternative: Custom Recovery Method If you prefer a custom recovery like , you can flash the recovery file via Odin first, then boot into recovery to flash a SuperSU.zip Magisk.zip compatible with the Galaxy Note 2 to upgrade beyond Android 4.4.2? How to root Galaxy Note 2 running Android 4.4.2 Kitkat
To root a Samsung Galaxy Note 2 (GT-N7100) Go to product viewer dialog for this item.
running Android 4.4.2 KitKat, the most common and reliable method is using CF-Auto-Root via the Odin flashing tool. Essential Files and Preparation Before starting, ensure you have the following components:
Samsung USB Drivers: Install Samsung Kies or standalone mobile drivers to ensure your PC recognizes the device.
Odin Tool: Download and extract Odin3 (v3.09 or similar) on your computer.
Root Package: Download the specific CF-Auto-Root-t03g-t03gxx-gtn7100.zip file for your model. Extract it to find the .tar.md5 file.
Device Settings: Enable USB Debugging by tapping the "Build Number" seven times in Settings > About Device and then checking the box in Developer Options. Rooting Steps
Enter Download Mode: Power off your phone. Simultaneously press and hold the Volume Down + Home + Power buttons. When a warning screen appears, press Volume Up to enter Download Mode.
Connect to PC: Run Odin as an administrator and connect your phone via USB. The ID:COM box in Odin should turn blue, indicating a successful connection.
Load Root File: Click the AP (or PDA in older versions) button in Odin and select the extracted CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file. To root your Samsung Galaxy Note 2 (N7100)
Flash: Ensure only Auto Reboot and F. Reset Time are checked. Click Start. The process usually takes less than a minute.
Reboot: Your device will reboot once the process is complete, and Odin will show a green "PASS" message. Post-Root Verification
Check SuperSU: Look for the SuperSU app in your app drawer; it manages root permissions.
Root Checker: Download a "Root Checker" app from an alternative app store (as Google Play Store support for KitKat is ending) to verify status.
Warning: Rooting voids your warranty and carries a risk of bricking your device. Always back up your data before proceeding. How to Root Samsung Galaxy Note 2 II Easily !!
To root the Samsung Galaxy Note 2 (GT-N7100) Android 4.4.2 KitKat , the most common and effective method is using the CF-Auto-Root tool alongside the flashing software. Essential Pre-Requirements
Before proceeding, ensure these conditions are met to avoid bricking your device: Verify Model : This method is strictly for the international variant. Battery Life : Maintain at least 80% charge to prevent power failure during the flash. : Install the Samsung USB Drivers Samsung Kies on your PC. USB Debugging : Enable this by going to Settings > About Device and tapping Build Number seven times, then selecting it under Developer Options
: While this process typically doesn't wipe data, it is strongly recommended to back up your files. Required Root Files Odin v3.09 : The flashing tool used on Windows. CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 : The specific root package for Android 4.4.2. SuperSU (Optional) : If using a custom recovery method like , you will need the SuperSU ZIP file. Step-by-Step Rooting Procedure Extract Files : Unzip the Odin and CF-Auto-Root files on your PC. Enter Download Mode : Power off your phone. Press and hold Volume Down + Home + Power
buttons simultaneously. When the warning screen appears, press to continue. Launch Odin : Right-click Odin on your PC and select Run as Administrator Connect Device : Plug your into the PC. The box in Odin should turn or yellow, indicating a successful connection. Select Root File : Click the in newer Odin versions) button and select the extracted root file. Configuration Check : Ensure only Auto Reboot F. Reset Time are checked. Leave Re-Partition unchecked. message will appear in Odin when complete. Reboot & Verify : The device will automatically reboot. Look for the SuperSU app in your app drawer to confirm successful root access. Post-Rooting Notes Samsung Knox : You may be prompted to disable Samsung Knox
Disclaimer: This draft includes necessary safety warnings. Rooting voids the warranty and can brick the device if done incorrectly. The user assumes all risks.
Files (what to download)
- Samsung USB Drivers for Windows.
- Odin flashing tool (v3.09 recommended).
- CF-Auto-Root package specifically built for N7100 and Android 4.4.2 (ensure model and Android build match).
- Alternative: TWRP recovery image for N7100 + Magisk ZIP or SuperSU ZIP.
- Optional: Stock firmware for your exact N7100 variant (for recovery in case of bad flash).
Important: Only use files that explicitly list N7100 and Android 4.4.2 / KitKat compatibility. Using mismatched files (different model or carrier variant) can brick the device.
The Rooting Process (Using Odin)
Once you have downloaded the .tar.md5 root file, you will need Odin3 (version 3.07 or 3.09 is best for this older device).
- Download Odin3: Extract the Odin zip file on your PC.
- Boot into Download Mode: Power off the Note 2 completely. Press and hold Volume Down + Home + Power simultaneously. When the warning screen appears, press Volume Up to continue.
- Connect to PC: Connect the Note 2 to your computer via USB. In Odin, the ID:COM box should turn yellow or blue, indicating a successful connection.
- Load the File:
- Click the PDA (or AP) button in Odin.
- Select the root file you downloaded (
CF-Auto-Root...tar.md5).
- Flash: Ensure only "Auto Reboot" and "F. Reset Time" are checked. Click Start.
- Wait: The device will flash the root file and automatically
The story of rooting the Samsung Galaxy Note 2 (GT-N7100) Go to product viewer dialog for this item.
on Android 4.4.2 KitKat is a classic journey from the golden era of Android customization. Back in 2014, when the official KitKat update finally reached the international N7100, the developer community—led by figures like Chainfire—quickly adapted tools to ensure users could maintain full control over their hardware. The Quest for Control Files (what to download)
The adventure typically begins with a user seeking to bypass the restrictions of stock firmware. For the
, the most reliable "map" for this journey was the CF-Auto-Root method, designed specifically to be the simplest path for beginners.
The Artifacts: To succeed, a traveler needed a few essential digital tools: Odin: The legendary Samsung flashing tool for PC.
CF-Auto-Root File: Specifically version CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5.
Samsung Drivers: Often installed via Samsung Kies to ensure the PC could "talk" to the phone. The Ritual (The Rooting Process)
The transformation of the device followed a precise series of steps that felt almost like a rite of passage:
Awakening the Device: Users had to unlock "Developer Options" by tapping the Build Number seven times in settings, then enabling USB Debugging.
Entering the Void (Download Mode): The phone was powered off, then rebooted by holding Volume Down + Home + Power until a warning screen appeared, followed by Volume Up to confirm.
The Connection: Once plugged into the PC, Odin would display a blue "ID:COM" box, signaling that the bridge was established.
The Flash: Selecting the PDA or AP button in Odin, the user would point to the CF-Auto-Root file and hit Start. Within minutes, a red Android icon would appear on the phone's screen as it performed the root. The Aftermath How to root Galaxy Note 2 running Android 4.4.2 Kitkat
The Correct Root File for N7100 Android 4.4.2
There are two main methods to root the Note 2 on KitKat. The most reliable method uses a custom recovery (TWRP) to flash a root file. The old “CF-Auto-Root” method is outdated and often fails on newer 4.4.2 builds.
Here is the verified samsung n7100 root file 4.4.2 download list:
Step-by-Step Guide to Root N7100 on 4.4.2
Once you have downloaded the files and installed the drivers, follow these instructions carefully.
Important Disclaimer
Warning: Rooting your device voids any remaining warranty (though unlikely for a 2012 device), and using the wrong file can hard-brick your Note 2 (turn it into a paperweight). Follow this guide exactly. We are not responsible for any damage. This guide is for the GT-N7100 (International Exynos) only. Do not use on US carrier models (e.g., T-Mobile SGH-T889, Verizon SCH-I605).
Step 4: Load the Root File
- In Odin, click the PDA button (sometimes labeled AP in newer versions).
- Navigate to the extracted
CF-Auto-Root-t03g-gtn7100.tar.md5file and select it. - Crucial: Ensure that only "Auto Reboot" and "F. Reset Time" are checked in Odin. Do NOT check "Re-Partition" or "Nand Erase."
