Become Reseller

Richmond 5v40-7 Water Heater Specs • Must Read

Richmond 5V40-7 Water Heater Specs: A Complete Breakdown

When it comes to reliable, budget-friendly residential water heating, the Richmond brand—exclusively sold at Menards—has long been a staple for homeowners and contractors alike. Among their most popular models is the Richmond 5V40-7. If you are searching for the precise dimensions, recovery rate, energy efficiency, or installation requirements for this unit, you have come to the right place.

This article provides an exhaustive deep dive into the Richmond 5V40-7 water heater specs, including performance data, physical measurements, warranty information, and common replacement considerations.

7. Electrical Requirements (for gas control)

| Specification | Detail | |---------------|--------| | Power Source | Piezo igniter (no external electric needed) | | Control Type | Honeywell or White-Rodgers gas valve with thermocouple | | Pilot Type | Standing pilot (continuous) | | Thermostat | Dial-type (adjustable 90°F – 150°F) |

Water Quality

If your home has hard water (above 7 grains per gallon), you must install an expansion tank and consider a water softener. Sediment buildup will destroy the bottom of the tank within 3-4 years.

Important Considerations Before Buying

  • Fuel type: Natural gas only. Not for LP/propane without conversion kit (check availability).
  • Venting: Requires existing 3" or 4" B-vent; not power vent.
  • Space: Ensure 6" minimum clearance for service at front; 59-3/4" height fits most closets.
  • Local codes: Check if 0.60 EF meets current regional standards (some areas now require 0.62+ EF).

Specifications may vary slightly by production year. Always verify with the rating plate on the actual unit before installation.

The Richmond 5V40-7 is a 40-gallon, high-input propane (LP) gas water heater. Designed for efficiency and reliability, it features a porcelain-lined tank and durable stainless steel burners. Core Specifications

Model Number: 5V40-7 (often seen as 5V40-7P for propane models).

Fuel Type: Propane (LP) Gas; also available in Natural Gas variants. Tank Capacity: 40 Gallons. Burner: High-input stainless steel for fast recovery. Lining: Corrosion-resistant porcelain (glass) lining. Max Working Pressure: 150 PSI. Connections: Standard 3/4" NPT fittings. Key Performance Features richmond 5v40-7 water heater specs

Fast Recovery: Propane models like the 5V40-7 recover hot water approximately 2.5 times faster than standard electric units.

Energy Efficiency: Includes rigid foam insulation and low-input pilots to reduce heat loss and standby energy waste.

Simple Maintenance: Features a "4-hole top" design for easier access and installation. Proper Care & Troubleshooting Guide

To maintain peak performance and safety, follow these guidelines from the Richmond Use and Care Manual: Use and Care Manual - Richmond Water Heaters

Richmond 5V40-7 is a 40-gallon propane (LP) gas water heater, primarily recognized as part of Richmond’s "Miser" high-input series. While it is an older model, it remains notable for its fast recovery times and durable construction designed for residential or mobile home use. Kyschools.us Core Specifications

Based on manufacturer data and historical listings, here are the primary technical specs for the (and its variants like the 5V40-7P): Tank Capacity : 40 Gallons. : Propane (LP) Gas. BTU Rating

: High-input design, typically around 36,000 to 40,000 BTU/hr depending on the specific sub-model configuration. Burner Material Richmond 5V40-7 Water Heater Specs: A Complete Breakdown

: Durable stainless steel or precision-aligned aluminized steel for quiet operation. Tank Lining

: Porcelain-lined steel for corrosion resistance and extended tank life. Recovery Rate

: Recovery is approximately 2.5 times faster than standard electric units, providing a high volume of hot water quickly. Key Features Installation Ease

: Features a 4-hole top design (on the 5V40-7P) for easier access and faster plumbing connections. Safety Components

: Comes standard with a factory-installed Temperature and Pressure (T&P) relief valve. Mobile Home Compatibility

: Some versions, like the 5V40T or 5VR40T, are HUD-certified specifically for manufactured housing and mobile home installations. Richmond Water Heaters Maintenance and Troubleshooting

If you own this model and are experiencing issues, consider the following: JustAnswer Insufficient Hot Water : Check the gas control valve pilot flame . A weak pilot can prevent the main burner from igniting. Pilot Won't Stay Lit : This is often caused by a faulty or misaligned thermocouple , which signals the valve to keep gas flowing. Burner Cleaning Fuel type: Natural gas only

: Ensure the burner assembly is free of debris and the unit has proper ventilation to maintain efficiency. JustAnswer

For further details on installation or part replacement, you can refer to the Richmond Residential Gas Water Heaters Guide or download the Standard Use and Care Manual provided by Richmond Water Heaters or check the availability of replacement parts for this specific model?

40-Gallon Tall 40000 BTU Natural Gas Water Heater - 6 Year Warranty

40-Gallon Tall 40,000 BTU Natural Gas Water Heater - 6 Year Warranty | Reliance Water Heaters. www.reliancewaterheaters.com

Maintenance & Longevity Tips

To ensure the Richmond 5V40-7 reaches or exceeds its warranty lifespan:

  1. Flush the Tank Annually: Drain a few gallons (or fully flush) the tank once a year to remove sediment buildup from the bottom. This prevents the lower element from burning out and eliminates rumbling noises.
  2. Check the Anode Rod: Inspect the anode rod every 2–3 years. If the rod is heavily corroded or worn down to the wire core, replace it to prevent the tank from rusting out.
  3. Test the T&P Valve: Lift the lever on the Temperature and Pressure relief valve once a year to ensure it operates freely and does not leak.

Dimensions & Physical Data

| Measurement | Inches | |-------------|--------| | Height | 59-3/4" (total) | | Height to Gas Connection | 16-1/2" | | Diameter | 20" | | Water Inlet / Outlet | 3/4" NPT (top connections) | | Gas Connection | 1/2" NPT | | Flue Size | 3" diameter |

1. Performance & Recovery

  • The Good: With a 40,000 BTU burner, this unit offers a solid recovery rate. It heats water faster than many entry-level electric models. For a standard shower (approx. 2.5 GPM flow), a 40-gallon tank at standard temperature settings can provide roughly 60–70 gallons of hot water in the first hour.
  • The Use Case: This is sufficient for a household of 2–3 people with typical usage (showering, laundry, dishes). If you frequently run the dishwasher and washing machine simultaneously while someone is showering, you may deplete the tank.