Skip to content

Resetter Printer Canon G2010 Work [ 2024-2026 ]

Canon PIXMA G2010 , "resetting" typically refers to two different actions: clearing a 5B00/P07 error (Waste Ink Pad Full) or performing a Factory Reset to clear custom settings. Formacionpoliticaisc 1. Resetting the Waste Ink Counter (5B00 / P07 Error)

This error occurs when the internal waste ink pads are digitally "full." You can often bypass this manually without external software. Enter Service Mode Turn off the printer but keep it plugged in. Press and hold the (triangle) button. While holding Stop, press and hold the Release the button (keep holding Power). (some guides suggest 6). Release the

button. The green light should flash and then stay solid, indicating you are in Service Mode. Clear the Counter In Service Mode, press the

. The printer should print a page showing the reset status (the "D" value should now be 0%). Turn the printer off and then back on to exit Service Mode. 2. Factory Reset (Resetting Settings)

If you just want to restore the printer's default settings (e.g., to fix minor glitches or network issues), follow the official Canon G2010 Manual ij.manual.canon Ensure the printer is

(pliers/screwdriver icon) button until a "1" appears on the LCD. button repeatedly until appears on the screen. Press either the button to initiate the reset. 3. Alternative: Software-Based Reset If the manual buttons do not work, some users use the WIC Reset Utility

, which is a third-party tool that requires purchasing a "Reset Key" to clear the waste ink counters electronically. wic-reset.com Maintenance Tips

Resetting Canon G2010 Printer: A Simple Guide - Formacionpoliticaisc

The Canon PIXMA G2010 resetter refers to tools or procedures used to clear the internal "waste ink counter," which triggers errors like 5B00 or P07 when the printer's ink absorber pads are theoretically full. While the printer might stop functioning to prevent ink leaks, you can often resume printing by resetting these software limits. Understanding the 5B00 Error

This error occurs because the printer tracks every cleaning cycle and ink flush. Once the limit is reached, it displays an "Ink Absorber Full" message and locks the device. A resetter—whether a software utility or a manual sequence—tells the printer's motherboard that the counter is back to 0%. Method 1: Manual Button Reset (No Software Required)

You can often clear the 5B00 error using only the printer's physical buttons by entering Service Mode. Enter Service Mode: Turn off the printer completely.

Hold the Stop button (red triangle), then press and hold the Power button. While still holding Power, release the Stop button. Press the Stop button 6 times.

Release the Power button. The green light should flash and then stay steady. Reset the Counter: Once in Service Mode, press the Stop button 5 times. Press the Power button once to confirm the reset.

The printer will print a page showing the counter (D-value) is now D=000.0.

Finish: Turn the printer off and then back on to exit Service Mode. Method 2: Professional Software Resetters

If manual button sequences fail, specialized software can provide a deeper reset.

Canon Service Tool (V3400/V4720/V6310): These are technician-level tools used to interface with the printer via a USB cable. In the tool, you select Main under the "Absorber Clear Ink Counter" section and click Set.

WIC Reset Utility: A popular third-party tool available at WIC Reset

that requires a purchased "Reset Key". It is often preferred for its user-friendly interface and support for Windows and macOS systems. Hardware Resetter: Devices like the MC-G02 Chip Resetter Go to product viewer dialog for this item.

are used for newer G-series models that use maintenance cartridges with chips, allowing you to reset the chip's memory without replacing the unit. Method 3: Resetting Ink Levels After Refill

If your printer isn't throwing an error but is flashing a low ink warning after you've refilled the tanks, you need an ink level reset. resetter printer canon g2010

Initialization: Press the Setup button, then use the + button until "C" appears on the LCD. Press Black or Color to initialize the settings.

Bypass Warning: Alternatively, press and hold the Stop button for 5–10 seconds to bypass the low ink warning and resume printing. Important Maintenance Tip

Resetting the software counter does not physically empty the waste ink pads. If you reset the printer multiple times without cleaning or replacing the physical Ink Absorber Pads, ink may eventually leak out of the bottom of the device. For long-term use, it is recommended to eventually wash the pads in warm water and dry them before reinstallation.

The Ultimate Guide to the Resetter Printer Canon G2010: Why, When, and How to Reset Your MegaTank

If you own a Canon PIXMA G2010, you’ve invested in one of the most popular “MegaTank” inkjet printers on the market. Known for its low-cost refillable ink tanks and high page yield, the G2010 is a workhorse for home offices and small businesses. However, like all printers in this series, it has a hidden obstacle: waste ink pad counter.

When that counter fills up, your printer locks itself down with error codes like "5B00" or "5B01". This is where a resetter printer Canon G2010 becomes essential.

In this comprehensive guide, we will explain what a resetter is, why you need it, how to find a safe one, and provide a step-by-step walkthrough to bring your Canon G2010 back to life.

Final Thoughts

Resetting your Canon G2010 is a software solution to a hardware problem. While this guide fixes the digital counter and gets you printing again, please remember that the physical waste ink pads are still full.

If you print heavily, check the bottom of your printer occasionally for ink leakage. If you found this guide helpful, share it with others facing the same error 5B00 headache!

Disclaimer: This guide is for educational purposes. Resetting the ink counter without servicing the waste pads may lead to ink overflow. Proceed at your own risk.

To reset a Canon G2010 printer, you can either perform a manual factory reset through the settings menu or enter Service Mode to clear specific errors like the 5B00 (waste ink pad full) error. 1. Simple Factory Reset (Printer Settings)

Use this method to restore original factory settings for general troubleshooting. Turn on the printer.

Press the Setup button (pliers/screwdriver icon); a "1" will appear on the LCD.

Press the + button repeatedly until the letter "C" appears on the LCD.

Press the Color or Black button to start the initialization. 2. Manual Reset for "Waste Ink Pad Full" (Error 5B00)

This process enters Service Mode to clear internal counters without external software. Step A: Enter Service Mode Turn off the printer but keep it plugged in. Press and hold the Power button. While holding Power, press the Stop button 6 times.

Release the Power button. Wait for the green power light to stop flashing and stay steady. Step B: Reset the Counter

While in Service Mode (steady green light), press the Stop button 5 times.

Press the Power button once. The printer will cycle and may print a page showing the D-value (e.g.,

Turn the printer off and back on again to exit Service Mode. 3. Software Resetter Tools If manual steps fail, you can use specialized software:

The Canon PIXMA G2010 is a high-volume refillable ink tank printer favored for its low running costs. However, like many inkjet devices, it can eventually encounter system blocks—most notably the 5B00 error, which signals that the internal waste ink absorber is theoretically full. This guide explains how to use a "resetter" method to clear these errors and restore functionality. Why Does Your Canon G2010 Need a Reset? Canon PIXMA G2010 , "resetting" typically refers to

Printers track ink usage during cleaning cycles. When the internal counter reaches a certain limit, the printer assumes the waste ink sponge is saturated and halts all printing to prevent overflow. Common symptoms include: Error Code 5B00 or P07 appearing on your computer. The Alarm and ON lamps flashing alternately 7 times.

The printer becoming completely non-responsive to print commands. Step 1: Entering Service Mode

Before you can reset the counter, you must put the printer into Service Mode. This state allows the printer to accept administrative commands.

Turn off the printer, but keep it plugged into the power source. Press and hold the Stop button. While holding Stop, press and hold the Power button. Release the Stop button (keep holding the Power button).

Press the Stop button 5 times (some older guides suggest 6 times; 5 is standard for G2010). Release the Power button.

Wait for the green power light to stop flashing and remain steady. The LCD screen should be blank or show a specific service indicator. Inkjet - PIXMA G2010 - Canon Philippines

RRP ₱ 7,495.00. Refillable Ink Tank All-In-One for High Volume Printing. Designed for high volume printing at low running cost. Canon Philippines

To reset a Canon PIXMA G2010, you can use manual button sequences to enter Service Mode for internal errors like "Ink Absorber Full" (Error 5B00) or use software tools for a more permanent digital reset. Manual Reset (Error 5B00 / P07)

This process clears the temporary counter and is often required before the printer will communicate with resetter software. Enter Service Mode: Turn off the printer but keep it plugged in. Press and hold the Stop button (red triangle). While holding Stop, press and hold the Power button.

Release the Stop button (keep Power held), then press the Stop button 6 times.

Release the Power button. Wait for the green light to stop blinking and stay steady. Reset Waste Ink Counter: Once in Service Mode, press the Stop button 5 times. Press the Power button once to confirm the command.

The printer will print a reset information page showing a "D" value of 0%.

Exit: Turn the printer off and then back on to return to normal operation. Software Resetters

If manual button presses do not permanently resolve the error, specialized utility software can be used:

Canon Service Tool (V5105 or newer): This official-style software allows for precise counter management. After putting the printer into Service Mode, you can select "Main" under the Ink Absorber Counter section and click "Set".

WIC Reset Utility: A third-party option WIC Reset Utility that requires a purchased "Reset Key" to clear the counter.

IJ Printer Assistant Tool: For general maintenance (ink flushes or alignment), use the Canon Support Assistant. General Settings Reset

To revert all user-facing settings to factory defaults without using Service Mode: Make sure the printer is on.

Press the Setup button (pliers/screwdriver icon) until "C" (for clear/initialize) appears on the LCD. Press either the Black or Color button to execute.

Canon PIXMA G2010 Go to product viewer dialog for this item. The Ultimate Guide to the Resetter Printer Canon

resetter is a essential utility for users facing the "Ink Absorber Full" error (error code 5B00). This software resets the internal counter of the printer, extending its life without needing immediate hardware servicing. 🛠️ Performance & Functionality

The resetter functions by interacting with the printer's Service Mode. It targets the main logic board's memory to clear overflow errors.

Error Resolution: Effectively clears 5B00, 5B01, and P07 errors.

Ease of Use: Most versions feature a simple "Main" and "Set" button interface.

Compatibility: Designed specifically for the Canon G2010 series, ensuring high success rates.

Cost Efficiency: Saves users from expensive official repair center fees. ⚠️ Critical Considerations

While effective, using a resetter carries specific risks that users should manage carefully.

Service Mode Access: The printer must be put into Service Mode manually before the software works.

Hardware Maintenance: Resetting the software does not clean the physical ink pads; you should manually clean them to avoid leaks.

Security Risks: Many "free" resetters found online may contain malware; always source from reputable technician forums.

One-Time Use vs. Unlimited: Some versions are sold as one-time keys, while others are full software packages. 📋 Pros & Cons

Immediate fix for "dead" printers showing orange blinking lights. Significantly cheaper than buying a new logic board.

No advanced technical skills required beyond following a guide. May void official Canon manufacturer warranties.

Risk of "locking" the Service Mode if the wrong button sequence is pressed. Requires a Windows PC (rarely supports macOS). 🚀 How to Use (Basic Steps)

Enter Service Mode: Turn off the printer. Hold Stop, then hold Power. Release Stop and press it 5 times while still holding Power. Run Software: Open the Service Tool on your PC.

Clear Counter: Select "Main" in the "Clear Ink Counter" section and click "Set."

Restart: Turn the printer off and back on to resume normal printing. If you'd like to troubleshoot further:

What error code or light sequence is your printer currently showing?

Do you need a recommendation for a reputable source to download the tool?

To help you get your printer back online quickly, let me know the specific issue!

Step 2: Open Service Tool on PC

  1. Connect printer to PC via USB.
  2. Run Service Tool v.4720 (as Administrator – right-click → Run as Administrator).
  3. In the tool:
    • Select USB PORT (auto-detects).
    • Click “Set Destination” – choose your region (e.g., Europe/Asia/USA).
      Wrong destination can cause errors.
    • Then click “EEPROM Clear” (or “Waste Ink Counter Clear”).
  4. A pop-up will ask for confirmation – click Yes.
  5. The tool will reset the counter.

6.2 Market Stratification

The difficulty of resetting the G2010 contributes to market stratification. Authorized Canon service centers possess the official reset tools and access to replacement pads. Independent repair shops must rely on leaked or cracked software tools. This enforces a monopoly on the "afterlife" of the printer.

Step 2: Prepare Your Printer