BitValve Blog

P2P Crypto Exchange

Reset Epson L3050-l3070 Adjustment Program 'link' May 2026

Epson L3050 is showing a "Service Required" error or has flashing red lights, it has likely reached its internal limit for the waste ink pad counter. Using an Adjustment Program (also known as a resetter) is the primary way to clear this error and resume printing without expensive professional repairs. Core Features of the L3050-L3070 Adjustment Program

The Adjustment Program is a specialized service utility designed for maintenance tasks that standard printer drivers cannot perform: reset epson l3050-l3070 adjustment program

Reset Epson L3050 L3070 printer Adjustment Program Kenya | Ubuy Epson L3050 is showing a "Service Required" error

Step 5: Finalize with "Initial Settings"

  1. Go back to the main menu.
  2. Click "Initial Settings" .
  3. Click "Set" . This tells the printer that it has been serviced.
  4. Wait for the progress bar to reach 100%.

Step 1 – Enter Service Mode

Most manuals require this sequence:

  1. Turn printer ON.
  2. While holding Stop/Reset button (circle with triangle inside), press and hold Power button.
  3. Keep holding Power, release Stop/Reset, then press Stop/Reset twice.
  4. Release Power button.
  5. Printer screen shows “Service Mode” or all lights blink slowly.

If this doesn’t work, try the “Load paper + Power + Reset” method (check included program notes). Step 5: Finalize with "Initial Settings"

How to Use the Adjustment Program (General Steps)

Warning: Use this tool at your own risk. Incorrect use can alter critical printer settings.

  1. Download the correct version: Ensure the program is specifically for the L3050/L3070 series. Generic versions may not work or could cause errors.
  2. Prepare the printer:
    • Turn the printer on.
    • Connect it to your PC via USB cable (wireless reset is often unreliable).
    • Disable your antivirus temporarily (some reset tools are flagged as "hacktools"—this is normal for such utilities).
  3. Run the program (as Administrator on Windows).
  4. Select your printer from the "Port" dropdown menu.
  5. Enter the "Adjustment" mode: You will typically need to click a button like "Particular adjustment mode" and then select "Waste ink pad counter".
  6. Check the current values: The program will show "Main pad counter" and "Flushing box counter" (if applicable). Both should show high numbers.
  7. Tick the checkbox next to the counter(s) and click "Initialization" or "Reset".
  8. Turn the printer off (some programs require this), wait 10 seconds, and turn it back on. The error should be cleared.

2. Before You Start – Hardware

  1. Turn off printer, unplug power.
  2. Open cover, locate waste pads (bottom right under print head path).
  3. If pads are soaked:
    • Replace with new pads OR
    • Install an external waste ink bottle (drill hole, run tube).
  4. Clean any leaked ink inside.
  5. Reassemble, plug in, power on.

Skipping hardware step = ink leaks onto your desk & electronics.

Step 3: Perform the Reset