Rapid Intel Storage Technology F6flpyx64nonvmdzip Install Direct

Intel Rapid Storage Technology (RST) f6flpy-x64-Non-VMD.zip is a driver package used during Windows installation to detect hard drives (SSDs or NVMe) when they are not automatically recognized. This specific "Non-VMD" version is typically required for systems using older Intel processor generations (generally 10th Gen and earlier) or systems where Intel Volume Management Device (VMD) is disabled in the BIOS. Installation Report: F6flpy-x64 Non-VMD Driver 1. Purpose & Requirement

During a "Custom" Windows installation, users may encounter an error stating, "We couldn't find any drives". This occurs because the Windows setup media lacks the specific Intel RST driver needed to communicate with the storage controller. The format is essential because it contains the raw files that Windows Setup can read. Intel Community 2. How to Obtain the Driver Intel has largely replaced standalone downloads with a single SetupRST.exe installer, but the driver files can still be extracted. Intel Community Official Source: Download the latest RST driver from the Intel Support Page Manual Extraction: If only an is available, you must extract it using a command terminal: PowerShell as an administrator in the folder containing SetupRST.exe Run the command: ./SetupRST.exe -extractdrivers SetupRST_extracted A folder named SetupRST_extracted will be created containing the driver files. Intel Community 3. Step-by-Step Installation Procedure Prepare USB:

Copy the unzipped driver folder (specifically the one containing files) onto your Windows installation USB drive. Boot Setup: rapid intel storage technology f6flpyx64nonvmdzip install

Start the Windows installation process. Reach the screen asking, "Where do you want to install Windows?" Load Driver: "Load driver" button at the bottom left.

and navigate to the folder on your USB where you saved the extracted drivers. Select Driver: 10th Gen or older CPUs: Look for the f6flpy-x64 Intel Rapid Storage Technology (RST) f6flpy-x64-Non-VMD

Select the matching driver from the list (usually "Intel RST Managed Controller") and click

Once the driver loads, your internal drives should appear in the list, allowing you to create partitions and continue installation. Intel Community 4. Critical Notes Re: F6flpy-x64-Non-VMD.zip and F6flpy-x64-VMD.zip Removed Click Load driver (bottom left corner)

Here is the breakdown of the technical details and documentation related to this installation:

Step 4: Load the f6flpyx64nonvmd Driver

  1. Click Load driver (bottom left corner).
  2. Click Browse.
  3. Navigate to the USB drive or folder containing the extracted f6flpyx64nonvmd files.
    • If the driver USB is separate, it will appear as a drive letter (e.g., D:).
    • If merged with the Windows USB, browse to the subfolder you created.
  4. Select the folder where f6flpyx64nonvmd.inf is located.
  5. Click OK.
  6. Windows will scan for compatible drivers. You should see “Intel RST VMD Non-VMD Controller” or similar.
  7. Select the driver and click Next.

Phase 3: Complete Installation

  1. Select your desired drive, click New, then Next.
  2. Windows will copy files. The system will reboot.
  3. Important: Do not remove the driver USB until the first automatic reboot completes.

Part 3: When Do You Actually Need This Driver?

You do not need to pre-load this driver for every Intel PC. Here is the checklist: