Radio Set Hx Prc 6020 Technical Data Install Page

(often referred to as the HX PRC-6020 in some regions) is a high-frequency (HF) man-pack radio set designed for reliable voice and data communications in tactical environments. Part of the broader HF-6000 series (Tadiran/Elbit Systems), it is engineered for secure, long-range operations on the modern battlefield. Elbit Systems UK Ltd Technical Specifications

The PRC-6020 provides robust performance across varied frequency modes and environmental conditions. Frequency Range: 1.5 MHz to 29.9999 MHz. Channel Spacing:

100 Hz (standard), with an option for 10 Hz spacing, allowing for up to 2,850,000 channels. Operating Modes: Fixed Operating Frequency (FOF). Dual-Frequency Simplex (DFS).

Frequency Hopping (ECCM) for secure communication against jamming.

Automatic Link Establishment (ALE) and "AUTOCALL" for rapid connection setup. Modulation:

Upper Side Band (USB), Lower Side Band (LSB), and Amplitude Modulation (AM). Output Power: Adjustable settings including 5W, 10W, and 20W. Data Capabilities: radio set hx prc 6020 technical data install

Supports voice, telegraph, encoded messages, and data transmission at rates up to 4,800 bps. Receiver Sensitivity: -110 dBm (for 10 dB SINAD). Environmental Durability:

Tested to MIL-STD-810 E/F standards; operates in temperatures from Installation and Configuration

The PRC-6020 is a versatile unit that can be deployed in multiple configurations depending on the operational need. Elbit Systems UK Ltd Man-Pack (Portable):

The core PRC-6020 unit is used as a backpack system. It is powered by high-capacity battery packs, such as the 12V 15Ah Lithium Sulphur dioxide (LiSO2) battery, which operates reliably in extreme temperatures. Vehicular Installation:

By integrating with vehicular docking stations and power amplifiers, the man-pack becomes the (often referred to as the HX PRC-6020 in

. This configuration typically uses the vehicle's power supply and may include external antennas for extended range. Fixed/Strategic Stations:

For long-range base operations, the unit can be configured as a

or higher, utilizing high-power amplifiers (ranging from 100W up to 4,000W) and specialized antenna solutions like NVIS (Near Vertical Incidence Skywave) to eliminate communication "skip zones". Antenna Connections:

Standard 50-ohm interfaces are used for connecting various tactical antennas. Key Features Built-In Test (BIT):

Automatically or operator-initiated diagnostics to ensure module-level health. Flash Messages: Capability to send up to 1,000 pre-defined quick messages. COMSEC/ECCM: Select a location in the vehicle that allows

Robust digital encryption and frequency hopping to prevent eavesdropping and interference. Emergency Deletion:

Quick-zeroize function to wipe sensitive cryptographic parameters if the unit is at risk of capture. for frequency hopping tables or the antenna types recommended for NVIS operations? PRC-6020 Radio Set Technical Overview | PDF - Scribd

B. Vehicular Installation

Step 1: Mounting Bracket

  1. Select a location in the vehicle that allows easy operator access and does not interfere with vehicle controls.
  2. Secure the mounting bracket to the vehicle structure using Grade 8 bolts (min 10mm diameter).
  3. Ensure the mounting surface can support 5kg of static load (radio weight plus operational stress).

Step 2: Power Connection

  1. Connect the RED (Positive) lead to the vehicle’s 24V DC power bus. Note: If the vehicle is 12V, a DC-DC converter is required.
  2. Connect the BLACK (Negative) lead to the vehicle chassis ground.
  3. Install the in-line fuse holder (15A) on the positive lead near the power source.

Step 3: Antenna Cabling

  1. Route the coaxial cable (RG-58 or equivalent low-loss) from the radio’s RF port to the external antenna mount.
  2. Secure the cable along the vehicle interior to prevent snagging.
  3. Connect the cable to the antenna base. Ensure the external antenna is grounded to the vehicle chassis.

Step 4: Radio Docking

  1. Place the radio into the mounting bracket.
  2. Engage the locking levers on the bracket sides to immobilize the radio.
  3. Connect the external power and antenna cables to the radio's side ports.
  4. Connect the vehicular handset (hand-mic).

3. Receiver Technical Data (Key Performance Indicators)

1. Key Technical Data (HX PRC 6020)

| Parameter | Specification | |-----------|----------------| | Frequency Range | VHF: 136–174 MHz
UHF: 400–470 MHz (or 350–390 MHz for some models) | | Channel Capacity | 256 channels / 16 zones | | Operating Voltage | 7.4 V DC (nominal, Li-ion battery) | | Battery Life | Approx. 12–16 hours (1500–2000 mAh, depending on version) | | RF Output Power | High: 5 W (VHF) / 4 W (UHF)
Low: 1 W | | Receiver Sensitivity | 0.25 µV (12 dB SINAD) | | Audio Output | 1 W @ 8 ohms | | IP Rating | IP67 (submersible 1 m for 30 min) | | Dimensions | ~125 × 60 × 38 mm (without antenna) | | Weight | ~320 g (with battery) | | Modulation | FM / 4FSK (digital mode if DMR variant) | | Antenna Connector | SMA-Female (or NATO-standard bayonet depending on clone version) |

Step 1: Physical Assembly

Via PC Software (HX-PRC Config Tool):

4. Physical & Environmental Data (MIL-STD Compliant)