Numark Mixtrack Pro 2 Rekordbox Mapping

Mapping the Numark Mixtrack Pro 2

to Rekordbox is possible but requires manual setup. Because Rekordbox is a Pioneer DJ product, it does not offer official "plug-and-play" support for Numark hardware. 🛠️ Compatibility Requirements Hardware Unlock: The Mixtrack Pro 2 is not a "Hardware Unlock" device for Rekordbox.

Subscription Required: You must have a paid subscription (such as the Core plan) to access the MIDI Learn feature.

Manual Mapping: Since there is no official mapping file, you must use the "Learn" function to assign every button, knob, and fader manually. 📋 Step-by-Step Manual Mapping Connect Hardware: Plug your Mixtrack Pro 2 into your computer via USB.

Open Rekordbox: Launch the software and ensure you are in Performance Mode. Access MIDI Settings:

Click the MIDI button in the top-right corner of the main interface. Select Device: Ensure " Mixtrack Pro II " is selected in the device dropdown list. Assign Controls:

Click the Add button for a specific function (e.g., Play/Pause). Click Learn. Press the corresponding button on your Mixtrack Pro 2 . Repeat this for all faders, EQs, and transport controls. ⚠️ Known Limitations

Jog Wheel Issues: Rekordbox often restricts jog wheel mapping for non-Pioneer controllers. You may be able to map them for pitch bending, but scratch functionality often requires complex workarounds or third-party "hacks".

Crossfader Reversal: Some users report the crossfader moving in the opposite direction in Rekordbox. There is no simple "reverse" checkbox, so double-check the MIDI CC values during mapping.

Shift/Modifiers: Mapping "Shift" combinations can be difficult without external MIDI translation software. 💡 Better Alternatives

If you find the Rekordbox mapping too technical or limited, consider these platforms with native support: Serato DJ Lite/Pro: The Mixtrack Pro 2 was specifically designed for Serato Support and works instantly.

Virtual DJ: Offers native support with no manual mapping required.

Mixxx: A free, open-source option with community-made mapping files for the Mixtrack Pro II . Mixtrack Pro II - Numark

Numark Mixtrack Pro II was originally designed for use with Serato DJ Intro

. While it is a class-compliant MIDI controller that can technically work with almost any DJ software, mapping it to

requires manual configuration and comes with specific hardware limitations, particularly regarding the jog wheels. Pioneer DJ Compatibility and Core Limitations No Official Mapping:

Pioneer DJ does not provide an official mapping file for the Mixtrack Pro II Jog Wheel Support: numark mixtrack pro 2 rekordbox mapping

rekordbox restricts native MIDI mapping for jog wheels on third-party controllers. While buttons and faders can be mapped easily, the platters for scratching or pitch bending will likely not function without complex third-party workarounds. Software Requirements:

To enable MIDI mapping in rekordbox, you must have a paid subscription or use a hardware unlock device. Pioneer DJ How to Manually Map the Mixtrack Pro II

Since there is no "plug-and-play" CSV or TSI file officially supported by Pioneer for this controller, you must use the MIDI Learn feature in rekordbox. Mixtrack Pro - Numark

The Numark Mixtrack Pro 2 requires manual MIDI mapping in Rekordbox DJ, as there is no official mapping file available from Pioneer DJ. Users can configure controls using the MIDI Learn function in Rekordbox, though jog wheel functionality often requires third-party scripts to work correctly. For more details, visit Pioneer DJ forums. Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ

The Numark Mixtrack Pro II is a popular DJ controller that has been widely used by DJs for years. One of its key features is its compatibility with various DJ software, including Rekordbox. In this article, we'll dive into the world of custom mappings and explore the Numark Mixtrack Pro II Rekordbox mapping.

What is Rekordbox?

Rekordbox is a professional DJ software developed by Pioneer DJ. It's known for its user-friendly interface, robust features, and seamless integration with Pioneer DJ hardware. However, Rekordbox also supports various third-party controllers, including the Numark Mixtrack Pro II.

What is a mapping?

In the context of DJ controllers and software, a mapping refers to the process of assigning specific functions to the controller's buttons, knobs, and faders. This allows the controller to communicate with the software and provide a customized user experience.

Numark Mixtrack Pro II Rekordbox Mapping

The Numark Mixtrack Pro II is a 2-channel DJ controller that features a range of controls, including jog wheels, play/pause buttons, cue buttons, and a crossfader. To use the Mixtrack Pro II with Rekordbox, you'll need to create a custom mapping that assigns the controller's functions to the software's various features.

There are several community-created mappings available online that provide a good starting point for your own custom mapping. These mappings can be downloaded and imported into Rekordbox, allowing you to use your Mixtrack Pro II with the software.

Key Features of the Numark Mixtrack Pro II Rekordbox Mapping

Here are some key features of the Numark Mixtrack Pro II Rekordbox mapping:

Creating a Custom Mapping

While community-created mappings can provide a good starting point, you may want to create your own custom mapping to suit your specific needs. To do this, you'll need to use Rekordbox's built-in mapping editor. Mapping the Numark Mixtrack Pro 2 Go to

Here are the steps to create a custom mapping:

  1. Open Rekordbox and navigate to the "Settings" menu.
  2. Click on "Controller" and select "Edit" next to the Mixtrack Pro II controller.
  3. In the mapping editor, you can assign functions to the controller's buttons, knobs, and faders.
  4. Save your custom mapping and import it into Rekordbox.

Tips and Tricks

Here are some tips and tricks to help you get the most out of your Numark Mixtrack Pro II Rekordbox mapping:

In conclusion, the Numark Mixtrack Pro II Rekordbox mapping offers a range of possibilities for customizing your DJ setup. Whether you're a seasoned pro or just starting out, creating a custom mapping can help you get the most out of your controller and software. With a little experimentation and practice, you can unlock the full potential of your Mixtrack Pro II and Rekordbox.

Quick DIY Mapping Checklist (if you build your own)

If you need the actual .csv mapping file, I can’t attach files here, but searching “Numark Mixtrack Pro 2 Rekordbox mapping CSV” on Google or Reddit’s r/DJs will get you a working download within minutes.

The Numark Mixtrack Pro II Go to product viewer dialog for this item.

is a classic entry-level controller primarily designed for Serato DJ. While it uses standard MIDI, using it with Pioneer’s rekordbox requires significant manual effort, as it is not natively supported. Core Compatibility Challenges No Native Mapping: Unlike Pioneer's own controllers, the Mixtrack Pro II

is not "plug-and-play" for rekordbox. Official mappings from Numark or Pioneer are not available.

The Jog Wheel Hurdle: rekordbox does not typically allow easy mapping of jog wheels for third-party controllers. While buttons and faders can be mapped, getting the platters to scratch or pitch-bend accurately is often impossible without complex workarounds.

Hardware Unlock: To even access MIDI mapping in rekordbox, you generally need a paid subscription (Core plan or higher) or a "Hardware Unlock" device connected to your system. Manual Mapping Process

If you choose to proceed, you must use the MIDI Learn function within rekordbox:

Open MIDI Menu: In rekordbox Performance mode, click the MIDI button at the top right. Select Device: Ensure the Mixtrack Pro II is selected in the device list.

Learn Functions: Choose a software function (e.g., Play, Cue, Fader), click Learn, and then press the corresponding button on your controller.

Known Issue: Some users have reported the crossfader moving in the opposite direction when mapped manually, a common glitch with non-Pioneer hardware. Better Alternatives

Given the mapping limitations, most DJs recommend one of the following paths: Mixtrack Pro II - Numark

Mapping the Numark Mixtrack Pro 2 to Rekordbox is a popular workaround for DJs who want to use Pioneer’s ecosystem without buying new hardware. While the controller was originally built for Serato DJ Intro, its standard MIDI protocol allows it to function with Rekordbox 6—provided you are willing to do some manual setup. The Reality Check: Official Support vs. Custom Mapping Jog Wheels : The Mixtrack Pro II's jog

Pioneer DJ does not provide an official mapping for the Mixtrack Pro 2. This means you cannot simply download a file from their website and start playing.

Hardware Unlock: To enable MIDI mapping in Rekordbox, you typically need a subscription or a "Hardware Unlock" device connected.

Jog Wheel Limitation: One major hurdle is that Rekordbox often restricts the "jog function" (the touch-sensitive platter movement) for non-Pioneer controllers. While buttons and faders map easily, getting the platters to scratch like they do in Serato requires advanced workarounds. How to Map the Mixtrack Pro 2 in Rekordbox

If you have a Rekordbox subscription or compatible hardware, you can use the MIDI Learn feature to build your own profile:

Connect Your Gear: Plug the Mixtrack Pro 2 into your computer via USB.

Open MIDI Settings: In Rekordbox, look for the MIDI button at the top of the screen (it will be highlighted if your controller is detected). Use the "Learn" Function: Select a tab (e.g., DECK or MIXER).

Click ADD and choose the function you want (e.g., Play/Pause, EQ High, or Crossfader).

Click the LEARN button next to the command, then move the corresponding button or knob on your Numark controller.

Fixing Inversions: Users often find that certain controls, like the crossfader or tempo sliders, might act in reverse (e.g., moving the fader up decreases BPM). Rekordbox does not have a "reverse" checkbox for every parameter, so you may need to adjust your physical movement style or look for third-party .csv mapping files that have corrected these values. Known Issues & Troubleshooting

Audio Output: Ensure your Mixtrack Pro 2 is selected as the Audio Device in Rekordbox preferences so that sound comes out of the RCA outputs or headphone jack.

Performance Pads: The Mixtrack Pro 2 pads are switches, not velocity-sensitive pads. They map well to Hot Cues and Manual Loops, but navigating multiple modes (FX vs. Sampler) can be "fiddly" compared to native software.

Sharing Mappings: Since there is no official file, many DJs share their custom mappings as CSV files on community forums like the Pioneer DJ Forums or Reddit.

For those who find the Rekordbox mapping too limited, the Mixtrack Pro 2 remains natively supported by Serato DJ and has extensive community mappings for Mixxx and Traktor Pro 2. Mapping Rekordbox to Numark Mixtrack Pro 2 – Pioneer DJ

Part 4: Step-by-Step Installation Guide

Assuming you have downloaded a .csv or .midi map file from a forum, follow these steps:

  1. Launch Rekordbox (Close it if open).
  2. Navigate to: Documents/Pioneer/rekordbox/controller (Windows) or ~/Library/Pioneer/rekordbox/controller (Mac).
    • If the folder doesn't exist, create it.
  3. Copy the downloaded mapping file into this folder.
  4. Launch rekordbox.
  5. Go to Preferences -> Controller -> MIDI.
  6. In the "Device" dropdown, select "Numark Mixtrack Pro 2."
  7. Click the folder icon next to "MIDI Mapping File" and select your downloaded file.
  8. Hit Apply and OK.
  9. Crucial step: Close rekordbox and reopen it. (Maps often fail to fully load on first initialization).

4.3 Performance Pads

The Mixtrack Pro 2 has four pad modes (Hot Cue, Loop, Sample, FX). These must be mapped via MIDI notes and a mode selector variable.

Suggested mapping:

| Pad Mode | Pad 1 | Pad 2 | Pad 3 | Pad 4 | |----------|-------|-------|-------|-------| | Hot Cue | Hot Cue 1 | Hot Cue 2 | Hot Cue 3 | Hot Cue 4 | | Loop | Active Loop | Set Loop In | Set Loop Out | Loop 1/2x | | Sample | Sampler Slot 1 | Sampler Slot 2 | Sampler Slot 3 | Sampler Slot 4 | | FX | FX1 On | FX1 Select | FX2 On | FX2 Select |

Note: Native pad modes require MIDI feedback LEDs. Rekordbox can send MIDI out to illuminate pads.