Nokia Ta1304 Flash File Pac File Fixed Link

Nokia Ta1304 Flash File Pac File Fixed Link

Nokia Ta1304 Flash File Pac File Fixed Link

Nokia TA-1304 , commonly known as the Nokia 105 4G , often requires flashing when it encounters software issues like boot loops, "Contact Service" errors, or hangs on the logo. Because this device uses a Spreadtrum/UNISOC chipset the flashing process involves using a

with a specific tool rather than standard Android flashing software The Flashing "Fix" Process

To fix a bricked or malfunctioning Nokia TA-1304, follow these steps to use the PAC firmware file: Preparation

Ensure the device is powered off and the battery is charged to at least to avoid interruption. Download the official Nokia TA-1304 Flash File (PAC format) and extract it to your computer. Install the necessary SPD/UNISOC USB Drivers on your Windows PC. Tool Setup SPD Flash Tool (often called ResearchDownload.exe UpgradeDownload.exe Click on the

(Load Packet) and browse to the extracted folder to select the firmware file. Initiating the Flash Play/Triangle icon (Start Downloading) in the tool. While the phone is powered off, hold the (usually the Center/Select nokia ta1304 flash file pac file fixed

button or both volume buttons for some models) and connect it to the PC via USB cable.

The tool will detect the device and start the "Downloading" progress bar. Completion Wait for the "Passed" or "Success" message in green.

Disconnect the phone and restart it. The first boot may take several minutes. Critical Troubleshooting Notes Nokia 105 user guide: Keys and parts - HMD

Part 5: Step-by-Step Flashing Guide – Fixed PAC File Installation

Step-by-step fixed flashing procedure (decisive, no ambiguity)

  1. Download and verify:
    • Obtain the official TA-1304 PAC file (confirm SHA256 or file size if publisher provides it).
    • Download ResearchDownload/UpgradeDownload tool compatible with PAC files.
  2. Install drivers:
    • Install Spreadtrum/Unisoc drivers. Reboot PC after install.
  3. Prepare the tool:
    • Run ResearchDownload.exe as Administrator.
    • Load the TA-1304 PAC file via the tool’s “Load Packet” / “Scatter/PAC” button.
    • Ensure all necessary partitions are checked (normally all except user data if you want to retain — but recommended full flash).
  4. Put phone in download mode:
    • Power off device completely.
    • Connect USB cable to PC but not to phone yet.
    • In ResearchDownload, click “Start” (or green play).
    • Press and hold required key combination for TA-1304 download mode (commonly Volume Down or Volume Up) while connecting the USB to the phone, or simply connect while powered off—tool should detect the device.
  5. Flash and monitor:
    • Tool will show progress bars and log. Do not disconnect until finished.
    • On success you’ll see a green PASS or success message.
  6. First boot:
    • Disconnect and power on device. First boot may take several minutes—be patient.
  7. Post-flash checks:
    • Verify baseband/modem, IMEI (Settings → About), Wi‑Fi, and cellular connectivity.
    • If IMEI shows as unknown, do not attempt illegal fixes; consult official service.

Nokia TA1304 Flash File (PAC File) – The Ultimate Fixed Guide to Unbrick & Repair

Published by: GSM Repair Hub
Difficulty Level: Advanced
Estimated Read Time: 8 minutes Nokia TA-1304 , commonly known as the Nokia

Write-Up: Nokia TA-1304 Flash File (PAC File – Fixed)

Device: Nokia TA-1304 (also known as Nokia C2 Tava / C2 Tennen / C3, depending on region)
File Type: PAC Firmware File
Status: Fully Fixed – No Auth Errors, No User Data Lock

Step 3: Configure Settings (Optional)

If you are using a "Fixed" file meant to remove locks, you generally do not need to change settings. However, ensure the option "Erase All" is unchecked unless you specifically want to wipe user data. If the phone is stuck on a logo, checking "Erase All" or "Format Flash" is often necessary, but do not check this if you want to preserve user data.

Conclusion: Revive Your TA1304 With Confidence

The Nokia TA1304 flash file PAC file fixed is not just another firmware – it’s a rescue mission for a bricked device. By using the correct, patched version of the firmware, you bypass Nokia’s restrictive security checks, dead EDL modes, and stuck bootloaders.

Remember the golden rules:

  1. Always verify the MD5 checksum.
  2. Use a high-quality USB cable.
  3. Disable driver signature enforcement.
  4. Never interrupt the flash process – even if it stalls for 5 minutes.

With this guide, your Nokia TA1304 should boot up as good as new. For persistent hardware-level NAND corruption, consider a motherboard replacement. But in 9 out of 10 cases, this fixed PAC file will bring your budget Nokia back from the dead.

Need help? Leave a comment on the source forum where you downloaded the file, or consult a professional using the OST LA log file.

Disclaimer: Flashing unofficial firmware voids your warranty. The term “fixed” refers to community patches for repair purposes. We are not responsible for permanent device damage. Always backup your QCN partition before flashing.

Common Signs Your TA1304 Needs a Flash:

  1. Stuck at Nokia boot logo for >10 minutes.
  2. Recovery mode says “Can’t load Android system. Your data may be corrupt.”
  3. Qualcomm HS-USB QDLoader 9008 (EDL mode) detected in Device Manager.
  4. Random reboots after OTA update.

📥 Example search term:

Nokia TA-1304 C3 PAC file fixed download Download and verify:

Would you like step-by-step instructions on how to flash the PAC file once you download it?