The Nokia TA-1304 , better known as the 2019 or 2020 edition of the Nokia 105 Single SIM Go to product viewer dialog for this item.
, is a humble feature phone that often becomes the center of a high-stakes technical "rescue" mission. For many users, this phone is a reliable lifeline for simple communication, but when it encounters a software glitch—like a "Contact Service" error or a forgotten security code—it requires a specific digital antidote: the PAC file. The Legend of the "Dead" Nokia 105 Imagine a user who has relied on their Go to product viewer dialog for this item.
for years. Suddenly, the screen freezes on the Nokia logo, or the device refuses to boot past a certain point. To a typical user, the phone is "dead." However, to a technician, the phone is simply in a "soft-brick" state, waiting for its flash file—the complete firmware package that can rewrite the phone's entire operating system. The Role of the PAC File
Unlike Android smartphones that often use "scatter files," the Nokia TA-1304
belongs to a family of devices powered by Unisoc (Spreadtrum) chipsets. These chipsets use a unique file format called .PAC.
The Blueprint: The PAC file is a single, compressed archive containing every piece of the phone's software "soul"—from the bootloader to the ringtones and the alphanumeric keypad drivers.
The Key: Flashing a PAC file is often the only way to bypass a locked phone if the default security code (historically 12345) has been changed and forgotten. The Flashing Ritual
The story of the TA-1304 flash file usually takes place in a small repair shop or a home office. It involves:
Preparation: Hunting down the exact PAC file compatible with the TA-1304 variant, as using the wrong version could permanently "hard-brick" the device.
The Tool: Using software like the SPD Upgrade Tool or ResearchDownload to "read" the PAC file.
The Connection: Turning the phone off, holding a "boot key" (often the center button or a specific keypad combo), and plugging it into a PC.
The Resurrection: As the progress bar turns green, the PAC file is unpacked and written to the 4MB of internal storage. Within minutes, the Nokia logo reappears, and the phone "wakes up" as if it were brand new.
For those who use these phones, the Nokia TA-1304 PAC file isn't just data; it's the digital tool that keeps a simple, essential piece of technology out of the landfill and back in the hands of its owner. Nokia 150 user guide: Keys and parts - HMD
The Nokia TA-1304 (marketing name Nokia 105 SS 2020 or Nokia 105 Dual SIM 2019 Go to product viewer dialog for this item.
depending on the specific region/variant) is a 2G feature phone. To flash this device, you typically require a PAC file firmware, which is the standard format for devices powered by Unisoc/Spreadtrum (SPD) chipsets. Flash File Requirements File Format: .pac Target Chipset: Unisoc/Spreadtrum (SPD)
Compatible Tools: SPD Upgrade Tool, SPD Research Tool, or SPD Factory Tool.
Necessary Drivers: SPD USB Drivers must be installed for the computer to recognize the phone in "Download Mode". Device Specifications Model Go to product viewer dialog for this item. Nokia 105 SS Storage/RAM 4 MB ROM / 4 MB RAM Network Display 1.77 inch (4.5 cm) Battery General Flashing Procedure
Backup Data: Flashing will wipe all personal information from the phone's memory.
Charge Battery: Ensure the device has at least 60% charge to prevent interruptions. Prepare Tool: Launch the SPD Flash Tool on your PC.
Load Firmware: Click the settings icon in the tool to browse and select the TA-1304 .pac file.
Connect Device: Turn off the phone. Hold the boot key (usually the middle/OK key or '0') and connect it to the PC via USB.
Start Flashing: Click the Start/Download button. The tool will display a "Passed" message once complete. Nokia 105 SS 2020 / HMD TA-1304 | DeviceAtlas
Nokia TA-1304 Flash File PAC File: Download and Installation Guide
The Nokia TA-1304, commonly known as the Nokia 6300 4G, is a reliable feature phone that blends classic design with modern connectivity like WhatsApp and YouTube. However, like any mobile device, its KaiOS software can occasionally face issues. Whether your device is stuck on the boot logo, experiencing frequent crashes, or you simply want to reset it to factory settings after a forgotten privacy password, using the Nokia TA-1304 flash file (PAC file) is the definitive solution.
In this guide, we provide a comprehensive walkthrough on how to download and install the official firmware to restore your device to its original state. What is the Nokia TA-1304 PAC File?
The PAC file is a specific firmware format used for devices powered by Spreadtrum (SPD) or Unisoc processors. Since the Nokia TA-1304 runs on a specialized chipset compatible with these tools, the PAC file contains the entire operating system, bootloader, and system recovery data required to "re-flash" the phone.
Flashing this file essentially wipes the existing software and replaces it with a fresh, clean version of the official Nokia firmware. Reasons to Flash Your Nokia TA-1304
Flashing the firmware is often the last resort for software-related issues, but it is highly effective for: Fixing a "Hang on Logo" or boot loop issue. Removing a forgotten Screen Lock or Privacy Password.
Repairing software bugs or system errors after a failed update.
Restoring the device if it has been "bricked" during technical tinkering. Upgrading or downgrading the KaiOS version. Prerequisites Before You Begin
Before proceeding with the flashing process, ensure you have the following ready: A Windows PC or Laptop. A high-quality Micro-USB cable. The Nokia TA-1304 device with at least 50% battery charge.
A backup of your personal data (flashing will erase all internal storage). The necessary software drivers and tools (listed below). Step 1: Download Required Files
To successfully flash your device, you need to download three specific components:
Nokia TA-1304 Flash File (PAC format): Ensure you download the version that matches your region for the best network compatibility.
SPD/Unisoc USB Drivers: These allow your computer to recognize the phone in "Download Mode."
SPD Upgrade Tool (Research Download Tool): This is the utility used to push the PAC file from your PC to the phone. Step 2: Install the USB Drivers Extract the downloaded USB Driver package. Run the setup file and follow the on-screen instructions.
Restart your computer to ensure the drivers are properly initialized. nokia ta1304 flash file pac file
Step 3: How to Flash Nokia TA-1304 Using the SPD Upgrade Tool
Follow these steps carefully to avoid any errors during the process:
Launch the Tool: Open the SPD Upgrade Tool folder and run the UpgradeDownload.exe file.
Load the PAC File: Click on the "Load Packet" button (usually represented by a single gear icon) in the top-left corner. Browse to the location where you extracted the Nokia TA-1304 flash file and select the .pac file.
Wait for Loading: The tool will take a moment to verify and load the firmware. Once the file name appears in the status bar, you are ready.
Configure Settings: Click on the "Start Downloading" button (the play icon). Connect Your Phone: Power off your Nokia TA-1304 completely.
Remove and re-insert the battery (optional but recommended).
Press and hold the Boot Key (usually the '*' key or the 'OK' button on Nokia feature phones).
While holding the key, connect the phone to your PC via the USB cable.
Flashing Process: Once the tool detects the phone, the flashing process will begin automatically. You will see a progress bar indicating the status.
Success: After a few minutes, the tool will display a "Passed" message in green. You can now disconnect your phone and power it on. Important Troubleshooting Tips
Failed to Start: if the tool doesn't recognize your device, check your cable and ensure the SPD drivers are correctly installed in the Device Manager.
Incompatible Version: Never disconnect the phone during the flashing process, as this can permanently damage the hardware.
Post-Flash Boot: The first boot after flashing can take up to 5-10 minutes. Be patient while the system initializes. Conclusion
Using the Nokia TA-1304 flash file PAC file is the most efficient way to keep your Nokia 6300 4G running smoothly. By following this guide, you can save on repair costs and fix common software glitches from the comfort of your home. Always ensure you are using official firmware files to maintain the security and integrity of your device.
If you'd like to find the latest firmware version for a specific region or need help identifying the correct boot key for your hardware revision, let me know!
The Nokia TA-1304 (often associated with the Nokia 1.4 or similar entry-level models depending on the specific region/model variant) is usually a Spreadtrum/Unisoc-based device. A .pac file is the stock firmware format used by the SPD (Spreadtrum) Flash Tool.
Firmware File: You need the Nokia TA-1304_XXXX_PAC.zip file.
Flash Tool: You must use the SPD Factory Tool or SPD Upgrade Tool.
Driver: Install SPD USB Drivers (Spreadtrum drivers) on your computer. Steps to Flash Nokia TA-1304 (.pac file)
Download and Install: Download the firmware and the latest SPD Flash Tool.
Run Tool: Run the SPD Upgrade Tool (e.g., ResearchDownload.exe or UpgradeDownload.exe).
Load File: Click the first gear icon (Load Packet) and select the .pac file.
Connect Device: Turn off the phone, hold the Volume Down button (or sometimes both volume buttons), and connect it to the PC via USB.
Start Flashing: The tool should automatically detect the device. Click the "Start" button (arrow icon) to begin flashing.
Complete: Wait for the progress bar to finish. A "Passed" message will appear, and the phone will restart.
Important Note: Flashing firmware can erase all data on the device. Ensure you have backups and that the firmware version is correct for your exact model. If you'd like, I can: Help identify the correct flashing tool version to download
Explain how to bypass specific error messages during the process Provide a link to a tutorial on setting up the drivers Let me know what stage you are currently at. Flashing Custom Firmware on Nokia | Step by Step Guide
Nokia TA-1304 , commonly known as the Nokia 105 (2019), uses a Spreadtrum (SPD) chipset, which requires a specific .pac flash file and the SPD Upgrade Tool for software repairs or updates. This process is typically used to fix issues like the phone being stuck on the logo, frequent restarting, or forgotten security codes. Preparation Checklist Before you begin, ensure you have gathered the following: The Flash File: A .pac firmware file specific to the
Flashing Tool: The SPD Upgrade Tool (also known as the Spreadtrum Flash Tool).
Drivers: SPD USB Drivers installed on your Windows PC to ensure the computer recognizes the phone.
Hardware: A high-quality micro-USB cable and a PC running Windows 7 or newer. How to Flash the Nokia TA-1304
Launch the Tool: Open the SPD Upgrade Tool on your computer.
Load Firmware: Click the "Load Packet" button (often represented by a gear icon) and select your .pac flash file.
Start Process: Click the "Start Downloading" button (the play icon) in the tool. Connect Device : Power off your Nokia TA-1304
completely. Hold the "Boot Key" (usually the center OK button or the Dial button) while connecting it to the PC via USB. The Nokia TA-1304 , better known as the
Monitor Progress: Once the tool detects the phone, the flashing process will start automatically. Wait for the "Passed" message to appear in green.
Finalize: Disconnect the phone and remove/reinsert the battery before powering it back on. Important Considerations
Data Loss: Flashing will completely wipe all data from the device, including contacts and messages.
Battery Level: Ensure the phone has at least 60% battery to prevent the device from shutting down mid-flash, which can cause permanent damage.
Security Code: If you are only trying to reset a security code, the default factory code for many Nokia feature phones is 12345.
Are you currently facing a specific error like "Fail to boot FDL" while trying to flash your device? Nokia 105 (TA-1304 SS) Pink - - IT - MOBILES
Nokia TA-1304 (Nokia 105 4G) uses a Spreadtrum (SPD) chipset, which requires a specific flash file and the SPD Upgrade Tool
for firmware installation. Flashing this file is typically done to resolve software issues like boot loops, forgotten security codes, or "Contact Service" errors. Essential Files and Tools Flash File: You need the official Nokia TA-1304 firmware Flashing Tool: SPD Upgrade Tool
(also known as UpgradeDownload) is the standard utility for these files. USB Drivers: Spreadtrum (SPD) USB Drivers
on your PC to ensure the device is recognized in "flashing mode". Step-by-Step Flashing Procedure The process for flashing files on this model typically follows these steps: Prepare the Tool : Open the SPD Upgrade Tool folder and launch UpgradeDownload.exe Load Firmware
: Click the "Load Packet" button (gear icon) and select your downloaded TA-1304 .pac file Start the Tool : Click the button (play icon) in the software. Note: Do connect the phone yet. Connect Device Power off the phone completely. (usually the (star) key or the center OK key for this model).
While holding the key, connect the phone to your PC via USB cable. Flashing Process
: Once the tool detects the phone, the flashing progress bar will start. Release the boot key and wait for the "Passed" message.
: After completion, disconnect the USB, remove and reinsert the battery, and power on the device. Critical Pre-Flashing Requirements Backup Data : Flashing will permanently erase all personal data from the phone's memory. Battery Charge : Ensure the phone has at least 60% battery
to prevent it from dying mid-process, which could permanently brick the device. Default Code
: If you are flashing solely to reset a code, the default Nokia security code is typically Are you attempting to fix a specific error , or do you just need help finding a verified download link for the firmware? Nokia 105 Ta 1304 Flash File !FREE! Download -NEW
📱 Nokia 105 Ta 1304 Flash File ! FREE! Download -NEW- - Google Drive. Download SP Flash Tool for Nokia phones
Revive Your Nokia 105 (TA-1304): How to Flash Firmware with a PAC File
Is your Nokia 105 (2019) acting up? Whether it’s stuck on the boot logo, suffering from software glitches, or you’ve simply forgotten your security code, "flashing" the device is often the best way to bring it back to life. For the Nokia TA-1304 , this process involves using a PAC flash file SPD (Spreadtrum/Unisoc) Flash Tool Why Flash Your Nokia TA-1304?
The TA-1304 is a reliable feature phone, but like any device, its firmware can become corrupted. Flashing the original stock firmware (PAC file) can fix: Boot Loops:
When the phone constantly restarts or hangs on the Nokia logo. Security Code Reset: If you've forgotten your lock code and the default isn't working. IMEI Issues: Fixing software-related network or signal problems. White Screen Errors: Resolving display issues caused by corrupted software. Essential Prerequisites
Before you begin, gather the following tools to ensure a smooth process: The Flash File: Download the official Nokia TA-1304 PAC firmware. Flashing Tool: SPD Upgrade Tool (also known as ResearchDownload). USB Drivers:
Install the Spreadtrum/Unisoc USB drivers so your PC can "talk" to your phone. A Reliable USB Cable:
A high-quality Micro-USB cable is essential for a stable connection. Battery Power: Ensure your phone is charged to at least 60%. Step-by-Step Flashing Guide Install Drivers: Start by installing the SPD USB drivers on your Windows PC. Launch the Tool: Extract the SPD Upgrade Tool and run ResearchDownload.exe as an administrator. Load the Firmware:
(Load Packet) in the top-left corner. Browse your computer and select the flash file you downloaded. Ready to Flash: Triangle button (Start Downloading). Connect Your Device: Power off your Nokia TA-1304 completely. While holding the
(usually the middle select button or the "Up" button), connect the phone to your PC via USB. Monitor the Progress:
A blue progress bar will appear. Once it finishes, you will see a green Final Step:
Disconnect your phone, remove and reinsert the battery, and power it on. Your device should now be running fresh firmware!
Flashing will erase all your personal data (contacts, messages, and call logs). Always try a Hard Reset first if your phone still powers on! Need help finding the exact firmware version for your region? Ask below and I'll help you track it down! Download SP Flash Tool for Nokia phones
Nokia TA1304 Flash File PAC File: A Comprehensive Guide
In the world of mobile technology, Nokia has been a legendary brand, synonymous with reliability, durability, and innovation. However, even the most iconic brands can encounter issues, and Nokia is no exception. One common problem faced by Nokia users is the need to flash their device with a new firmware, often due to software issues, corrupted files, or simply to upgrade to a newer version.
In this article, we'll focus on the Nokia TA1304, a popular model that has gained widespread use globally. Specifically, we'll explore the concept of flash files and PAC files, and provide a step-by-step guide on how to flash your Nokia TA1304 using these files.
What is a Flash File?
A flash file, also known as a firmware file, is a type of software that contains the operating system, applications, and configuration settings for a mobile device. When you flash your phone, you're essentially reinstalling the firmware, which can resolve software-related issues, improve performance, and add new features.
What is a PAC File?
A PAC (Product Activation Code) file is a specific type of flash file used for Nokia devices. It contains the firmware, configuration settings, and other essential data required to restore or update the device's software. PAC files are usually used for repairing and flashing Nokia phones, especially those with dead or corrupted firmware. Fix software issues : Resolve problems like freezing,
Nokia TA1304 Flash File PAC File: Importance and Benefits
The Nokia TA1304 flash file PAC file is a crucial tool for users experiencing software-related issues with their device. By flashing your TA1304 with a PAC file, you can:
How to Flash Nokia TA1304 using PAC File
Before we dive into the step-by-step guide, please note that flashing your device can potentially brick it if not done correctly. Make sure you:
Required Tools and Files:
Step-by-Step Guide:
Common Issues and Solutions
Conclusion
The Nokia TA1304 flash file PAC file is an essential tool for users experiencing software-related issues with their device. By following the step-by-step guide outlined in this article, you should be able to successfully flash your Nokia TA1304 using a PAC file. However, please exercise caution when flashing your device, as incorrect procedures can lead to bricking or voiding your warranty.
Frequently Asked Questions (FAQs)
By understanding the concepts of flash files and PAC files, you can take control of your Nokia TA1304's software and resolve common issues. If you're unsure or uncomfortable with the flashing process, consider seeking professional assistance or contacting Nokia support for further guidance.
Nokia TA-1304 (Nokia 105 4G) flash file, commonly provided in
format, is a firmware package used primarily for repairing software-related issues on this feature phone. Because the TA-1304 uses a Unisoc (Spreadtrum)
chipset, it utilizes the .pac file extension which is compatible with specialized flashing tools. Key Use Cases Repairing Boot Loops
: Restores the device if it is stuck on the Nokia logo or restarting continuously. Unlocking/Resetting
: Clears forgotten privacy passwords or security codes (default is typically Fixing "Contact Service"
: Resolves critical software errors that prevent the phone from reaching the home screen. Language Updates
: Can be used to install different regional firmware versions to change available system languages. Technical File Overview File Format (Package file for Unisoc/Spreadtrum) Unisoc T107 (typical for TA-1304) Flashing Tool SPD Upgrade Tool or Research Download Tool Connectivity Micro-USB cable Practical Review & Considerations Compatibility
: Ensure the firmware version matches your regional variant. Flashing an incorrect variant can cause the device to lose network signal (IMEI/NV data issues). Tool Reliability SPD Upgrade Tool
is the standard for .pac files. It is generally reliable but requires the correct Unisoc/SPD drivers
to be installed on your PC for the device to be recognized in "Download Mode" (usually triggered by holding the center or "up" key while connecting the USB cable). Risk Level
: Flashing firmware is a high-risk procedure. If the process is interrupted (e.g., cable disconnect), the device may become permanently "bricked." Always ensure the battery is charged to at least 50% before starting.
on how to flash this specific .pac file using the SPD Upgrade Tool?
Guide for the Nokia C3 - Turn use of phone lock code on or off
It seems you're looking for the proper firmware (flash file) for the Nokia TA-1304 (a model often associated with the Nokia C2 Tava or C2 2nd Edition in some regions), specifically in PAC format — which is used by tools like NOST (Nokia OST LA) or SP Flash Tool for MediaTek devices.
Here is the proper, structured answer:
Note on Nokia Security: Newer Nokia devices often have "Secure Boot" enabled. If the standard SPD Tool fails due to Secure Boot, you may require a specialized tool like CM2 (Infinity-Box), Miracle Box, or an Auth File specific to the firmware, which usually requires a paid service or technician. The free SPD tool works for most generic Spreadtrum PAC files, but strict Nokia security can sometimes block it.
Users and technicians flash a PAC file to the Nokia TA-1304 for these common reasons:
| Issue | Solution via PAC | |-------|------------------| | Soft brick (boot loop, stuck on logo) | Reflash full PAC | | Hard brick (no power, no response) | Use FDL with PAC to revive | | FRP lock (Google account verification) | Flash specific PAC (with FRP patch or after wiping) | | System corruption / malware | Clean factory restore | | Upgrade/downgrade Android version | Flash appropriate PAC version |
You should consider flashing the PAC file if you are experiencing any of the following:
The Nokia TA1304 runs on a Unisoc (Spreadtrum) chipset. Because of this, you cannot use older Nokia tools like Phoenix or Best. You must use tools designed for Unisoc processors.
Nokia does not publicly release PAC files. They are typically extracted from:
Reliable sources (use with caution):
⚠️ Many free downloads are fake or contain malware. Verify checksums if possible.
| Device | Nokia TA-1304 |
| --- | --- |
| Also Known As | Nokia C2 Tennen (also related to Nokia C2 2nd Edition / TA-1304 variant) |
| Flash File Format | .pac (Proprietary format used by Nokia / HMD Global and authorized service tools) |
| Required Flashing Tool | Nokia Care Suite (NCS) or OST LA (Online Service Tool for LA) |
| CPU | Unisoc (Spreadtrum) SC9832E |
| Android Version | Android 10 (Go edition) / Android 11 (depending on region) |
TA-1304_00WW_2_200_PAC.zip
TA-1304_10.00.200.01_Global.pac
Nokia_C2_Tennen_TA1304_MTK_to_UNISOC_PAC.rar
Always check region code (
00WW= Global,00IN= India,00LATAM= Latin America) and build number.