Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin. It is commonly used for corrosion protection on concrete substrates, foundations, and as a curing compound. Safety & Hazard Summary
While Nitocote PE135 is water-based and free from many common carcinogens like coal tar pitch, the Safety Data Sheet (SDS) still highlights important precautions: Petrolinetech Eye Contact : Can cause serious eye damage or irritation. Skin Contact
: May cause sensitisation or allergic reactions in sensitive individuals. Inhalation
: Prolonged inhalation of high concentrations may damage or irritate the respiratory system. : Toxic if swallowed. Handling & Personal Protection To ensure safe application, follow these recommended guidelines: Petrolinetech Protective Gear
: Wear tight-fitting chemical splash goggles, protective gloves, and appropriate clothing.
: Use barrier creams (e.g., Kerodex Antisolvent). If the product touches skin, wash immediately with soap and water; do not use solvents for cleaning skin. Ventilation
: Ensure adequate general and local exhaust ventilation when working in confined spaces.
: Store in a cool, dry, well-ventilated area in original containers at temperatures not exceeding 40°C. Application Guide Nitocote PE135 Data Sheet | PDF - Scribd nitocote pe135 msds
This guide provides an overview of the safety and handling guidelines for Fosroc Nitocote PE135, based on safety data sheet (SDS) information.
Nitocote PE135 is a single-component, water-based hydrophobic polyester resin coating used for waterproofing and protecting concrete, generally considered non-toxic and environmentally friendly. Safety Data Sheet (MSDS) Highlights 1. Hazard Identification Eye Irritation: May cause mild irritation. Skin Contact: Prolonged contact may cause mild irritation.
Inhalation/Ingestion: Generally low hazard, but industrial hygiene practices should be followed.
Hazardous Ingredients: Free from coal tar, solvents, and carcinogens. 2. First Aid Measures
Eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Skin: Wash with soap and water. Inhalation: Move to fresh air.
Ingestion: Do not induce vomiting. Seek medical attention if symptoms persist. 3. Firefighting Measures Flammability: Not flammable (water-based).
Extinguishing Media: Use water spray, foam, dry chemical, or carbon dioxide. 4. Accidental Release Measures Ecological information
Spills: Absorb with sand, earth, or a similar inert material.
Cleaning: Wash spill site with water. Do not allow material to enter drains or watercourses. 5. Handling and Storage
Handling: Wear appropriate protective equipment (gloves, goggles). Use in well-ventilated areas.
Storage: Keep containers tightly closed in a dry, cool place. Protect from frost and direct sunlight. Application Guide
Surface Prep: Surfaces must be clean, free from laitance, oil, and dust. Damp Substrates: Suitable for application on damp concrete. Method: Apply by roller or brush. Coverage: 2.5 m2m squared per litre (per coat). Thickness: Minimum 200 microns DFT ( microns wet film thickness) per coat. Coats: Two coats applied at right angles, preferably.
To make sure you have the most up-to-date information for your project, would you like: A link to the full, printable PDF SDS document? Specific dilution or cleaning instructions? Guidance on curing times? Nitocote PE135 Data Sheet | PDF - Scribd
I cannot prepare a formal, legally compliant Material Safety Data Sheet (MSDS) / SDS for Nitocote PE135 from scratch. An SDS must be issued by the manufacturer (Fosroc, now part of Sika Group) or their authorized distributor, as it contains proprietary test data, exact chemical compositions, and region-specific regulatory information (e.g., EU CLP, US OSHA, UK REACH). Harmful to aquatic life; avoid release to environment
However, I can provide you with a structured template of the required sections and populate it with typical, publicly documented hazard information for that specific product. You must obtain the official current SDS from Sika/Fosroc before use.
Nitocote PE135 is a high-performance, solvent-based, single-component polyurethane coating manufactured by Fosroc (a global leader in construction chemicals). It is specifically designed for the protection of concrete and steel structures in aggressive environments, including potable water tanks, sewage treatment plants, bridges, and marine facilities.
However, like all high-grade chemical coatings, working with Nitocote PE135 requires strict adherence to safety protocols. This is where the Material Safety Data Sheet (MSDS) —now often referred to as the Safety Data Sheet (SDS) under GHS (Globally Harmonized System)—becomes an indispensable document.
This article provides a deep dive into the Nitocote PE135 MSDS, explaining its sections, hazard identification, first-aid measures, handling procedures, and environmental impact. Whether you are a specifier, applicator, or safety manager, understanding this document is critical for compliance and safety.
The Nitocote PE135 MSDS is not just a bureaucratic document; it is a dynamic safety manual. It translates complex chemical hazards into actionable instructions. From its flash point of 25°C (meaning it ignites as easily as gasoline) to its aquatic toxicity, every applicator must respect the data within.
Key takeaways:
By integrating the Nitocote PE135 MSDS into daily toolbox talks and job hazard analyses, construction and maintenance teams can achieve durable, high-performance coatings without compromising health or environmental safety.
Disclaimer: This article is for informational purposes only and does not substitute for the official MSDS provided by Fosroc. Always consult the most current, region-specific Safety Data Sheet before handling, storing, or using Nitocote PE135.
| 720P | |
| 720p | |
| 1080p |
