Nck Dongle Spreadtrum Module 1.9 Download Portable May 2026

The NCK Dongle Spreadtrum Module is a professional tool developed by nckTeam, Inc.

designed for technicians to service smartphones and feature phones based on Spreadtrum (SPD) / UNISOC chipsets. While version 1.9 exists as a legacy download, note that later versions (such as 2.2) are more commonly used and offer updated support. Key Capabilities of NCK Spreadtrum Module Device Servicing:

Enables direct unlocking, firmware flashing, and repair operations for Spreadtrum-based devices. FRP & Security Removal:

Handles Factory Reset Protection (FRP) bypass and removes screen locks. Firmware Flashing: Allows flashing of stock firmware and specific partitions. Backup & Restore:

Includes features to backup/restore NVRAM (which holds IMEI, Bluetooth, and Wi-Fi addresses) to recover soft-bricked devices. Boot Repair: Helps fix phones stuck on boot loops or failing to turn on. Download and Usage Information

The tool can typically be found in specialized forums and repositories, such as this Google Drive link for Nck Dongle Spreadtrum Module 1.9 Hardware Requirement:

This is a dongle-activated application, meaning it requires the physical NCK Box or NCK Dongle hardware to function. Installation:

Requires installed Spreadtrum USB drivers to properly detect the device, often necessitating the user to hold volume buttons during connection. Nck Dongle Spreadtrum Module 1.9 Download

Disclaimer: This tool is intended for repair technicians and requires specialized hardware.

NCK Dongle Spreadtrum Module , specifically version 1.9 or later, is a specialized servicing tool designed for mobile technicians to manage smartphones and feature phones powered by Spreadtrum (SPD) chipsets. Developed by nckTeam, Inc.

, this module is part of the larger NCK Pro Box/Dongle ecosystem, providing a centralized interface for complex repair tasks that would otherwise require deep technical expertise or manufacturer-level access. Core Functionalities

The module provides a variety of diagnostic and maintenance tools: Firmware Management

: Users can flash stock firmware or specific partition files (.pac) to recover "soft-bricked" devices or update system software. Security & Maintenance : It allows for bypassing Factory Reset Protection (FRP)

, removing screen locks, and performing factory resets for authorized maintenance. Data Integrity

: The tool features partition-level backup and restoration, which is critical for preserving unique device data like NVRAM/NVDATA (containing IMEI, Wi-Fi, and Bluetooth addresses). Diagnostics The NCK Dongle Spreadtrum Module is a professional

: Technicians can read detailed device information, including chipset type, bootloader status, and security states. Operational Requirements

To use the module effectively, several components are necessary: : An official NCK Dongle

or NCK Pro Box with an active license is required for software activation. Spreadtrum USB drivers

must be installed on a Windows PC (Windows 7/8/10/11) to ensure the computer can communicate with the device in boot mode. Connection

: Devices are typically connected while powered off, often while holding specific "boot keys" (such as Volume Up or Volume Down) to trigger the flashing process. Ethical and Legal Considerations

While the NCK Spreadtrum Module is a powerful asset for repair shops and refurbishers, it must be used responsibly. Users are advised to only perform operations on devices they own or have explicit permission to service, ensuring compliance with local laws regarding mobile device security and data privacy. Using outdated versions like 1.9 may lack compatibility with newer chipsets, so professionals often prefer newer releases, such as version 2.1 or 2.2, which offer expanded model support. installation steps

Here is the generated content regarding NCK Dongle Spreadtrum Module v1.9. This content is formatted for a blog post or software update page. Key Features of NCK Dongle Spreadtrum Module 1

Key Features of NCK Dongle Spreadtrum Module 1.9

The 1.9 update brought several powerful features to the table, making it a go-to tool for technicians dealing with SPD-based handsets. Key capabilities include:

• Wide CPU Support: Added support for various Spreadtrum CPUs, including SC6531, SC6533, SC77xx, SC88xx, SC98xx, and early UniSoc models.
• Read/Write Firmware: The ability to read full stock firmware (ROM) from a device and write it back, essential for unbricking dead phones.
• Format/Factory Reset: Allows users to wipe user data and settings to bypass pattern locks, PIN codes, and passwords without losing the operating system.
• Unlocking Features: Supports network unlocking (SIM unlock) and removing Factory Reset Protection (FRP) on various security patch levels.
• IMEI Repair: Functions to backup and restore NVRAM, allowing for the repair of invalid or null IMEI numbers.
• Boot Repair: specialized functions to repair boot partitions on devices that no longer power on due to corrupted software.

Installation Procedure:

1. Extract the Archive: Use WinRAR or 7-Zip. Password (if asked): gsmfree or nckteam.
2. Run the Installer: Right-click Setup_NckSprd_Module_v1.9.exe -> Run as Administrator.
3. Select Directory: Install it inside the main Nck Dongle folder (usually C:\Program Files (x86)\Nck Dongle). Do not install to a new folder.
4. Copy the Loader: In the crack folder, you will find Nck_Loader_v1.6.exe (or similar). Copy this to the installation directory.
5. Install Drivers: Navigate to the Drivers subfolder. Run Sprd_USB_Driver_Install.exe (v1.9 includes new Unisoc drivers).
6. Run the Dongle: Always launch the Loader.exe, not the original Nck icon. Click "Activate" and select "Spreadtrum Module 1.9."
7. Test Connection: Connect your Spreadtrum phone (powered off). Click "Scan Port." If you see "SPRD U2S Diag" or "UNISOC USB Port," you are ready.

Troubleshooting: If the module crashes on start, install Microsoft Visual C++ Redistributables 2015-2022 and the .NET Framework 4.8.

❓ Troubleshooting Common Issues

Problem: Module fails to detect device.

• Fix: Install UNISOC USB drivers (v2.0.1 or newer). Disable driver signature enforcement on Windows 10/11.

Problem: “Server busy” during download.

• Fix: Use a VPN if in a restricted region, or try updating during off-peak hours (GMT night).

Problem: Dongle not recognized.

• Fix: Reinstall NCK Dongle USB driver from the official setup.

What’s New in v1.9

• Improved support for newer Unisoc SC9832E, SC9863A, Tiger T310/T610/T700 series.
• Bug fixes for Android 10/11/12 security patches that previously blocked read info.
• Faster flashing speed for PAC firmware files.
• Added repair for “no network” after flashing (NV parameter rebuild).

4. Unlock Network (NCK Code Bruteforce)

• Connect via ADB or Diag port.
• Click "Read Codes" . The module uses a server-sided algorithm to generate the 8-digit NCK code instantly (requires internet connection).

🔥 What’s New in v1.9?

According to the official changelog, NCK Dongle Spreadtrum Module 1.9 includes:

• Added Support for New UNISOC CPUs – Including T606, T616, T618, and T700 series.
• Improved Direct Unlock – For Android 12 and 13 devices without needing a factory reset.
• Faster Read/Write – Optimized flash reading speed for 64GB+ eMMC/UFS.
• Bug Fixes – Resolved "Handshake Failed" errors on certain SC9832E models.
• New FRP Reset Method – Works on latest security patches (2024/2025 builds).
• Repair IMEI – Now supports A/B slot devices seamlessly.

Part 4: Supported Models in Module 1.9

This module is not universal for all Spreadtrum phones. Version 1.9 specifically targets:

| Chipset | Specific Models Supported | | ---------------- | ------------------------------------------------------- | | SC7731E | Samsung Galaxy A03 Core (SM-A032F), Itel A48, Lava Z2 | | SC9832E | Tecno Spark 7 (BF6), Infinix Smart 6, Nokia C2 Tava | | SC9863A | Alcatel 1V (2020), ZTE Blade A31, Doogee X95 | | Unisoc T606 | Nokia G11, Moto E13 (Partial support – Boot repair only)| | Unisoc T310 | Hisense U40, Blackview A70 Pro |

New in 1.9: Added support for direct SC7705 (Smartwatch chip). You can now unlock smartwatches like the K22 and DZ09 via the USB port.