Narishige Pc10 Manual New !new! May 2026

I couldn’t find an official “Narishige PC-10 manual new” in my current knowledge base, and Narishige’s own website and product documentation typically refer to this model as the PC-10 (or PC-10/PC-100) vertical micropipette puller, originally released decades ago. There is no “new PC-10” — the closest modern equivalents are the PC-100 (which replaced the PC-10) or the PC-100C (with a digital display).

That said, if you have an original Narishige PC-10 (analog, two‑heater, gravity‑based puller), I can provide a comprehensive operational guide based on the original manual and common lab practices.

Q2: My manual says "Heater Scale Reference Table" – what is this?

A: The original PC-10 manual included a table correlating dial settings (e.g., 45–55 for 1mm borosilicate) to expected tip resistance (in MΩ). Without this table, you are guessing. narishige pc10 manual new

The Quest for the Lost Manual: Unlocking the Narishige PC-10

In the shadowy corners of neuroscience labs and electrophysiology workbenches, one name whispers precision: Narishige. And among their legendary tools, the PC-10 micropipette puller holds a cult status. But there’s a problem—a quiet crisis brewing on used equipment shelves and in university storage rooms.

The original manuals? They’ve become ghosts. I couldn’t find an official “Narishige PC-10 manual

1. Detailed Parts Diagram

The PC-10 has several mechanical components that wear out: the heater base, the solenoid plunger, the micro-switch, and the braking mechanism. A new manual should provide an exploded view with Narishige part numbers (e.g., for the heating filament or O-rings).

3. Preparation and Setup

Step 1: Selecting the Glass The PC-10 is compatible with various glass capillaries (e.g., borosilicate, aluminosilicate). Q2: My manual says "Heater Scale Reference Table"

Step 2: Installing the Glass

  1. Loosen the clamping screw on the upper glass holder.
  2. Insert the glass capillary vertically through the heater coil.
  3. Push the glass down until the bottom end protrudes sufficiently below the heater.
  4. Secure the upper clamping screw. Ensure the glass is held firmly but do not over-tighten (which can crack the glass).

Step 3: Attaching the Weight

  1. Attach the appropriate weight to the lower end of the glass capillary. The PC-10 typically comes with a set of weights of varying masses.
  2. Heavier weights produce a faster pull, resulting in shorter tapers and larger tip diameters. Lighter weights produce long, fine tapers.

7. Specifications (Typical)