Image

Nalco Ultimer 7752 Msds May 2026

Understanding the Nalco ULTIMER 7752 Safety Data Sheet (SDS/MSDS) is essential for industrial operators and safety managers who use this advanced flocculant for wastewater treatment. Developed by Nalco Water, an Ecolab company, ULTIMER 7752 is a high-performance, water-based polymer technology designed to improve solids capture while reducing environmental impact. What is Nalco ULTIMER 7752?

ULTIMER 7752 is a proprietary flocculant used primarily in wastewater treatment applications, such as wet gas scrubbers in refineries. Unlike traditional latex polymers, ULTIMER technology is water-based and does not utilize hydrocarbon solvents or surfactants, making it a more sustainable "green" alternative. Key Applications:

Suspended Solids Removal: Enhances the efficiency of removing particulate pollutants from industrial water.

Sludge Reduction: By replacing latex flocculants and eliminating the need for additional coagulants, it significantly reduces the volume of hazardous sludge produced.

Oily Wastewater Treatment: Specifically engineered to remain effective even in highly variable or oily wastewater environments. Critical Safety Information (SDS Summary)

According to the ULTIMER 7752 Safety Data Sheet, the product is generally classified as not a hazardous substance or mixture under normal use. However, standard chemical safety protocols must still be followed. Safety Guidelines & Data Hazard Identification nalco ultimer 7752 msds

Not classified as hazardous; no known health injuries under normal use. Composition

A proprietary mixture with no hazardous ingredients at levels requiring disclosure. First Aid

Eyes: Rinse with water. Skin: Wash with soap and water. Ingestion: Rinse mouth; seek medical advice if unwell. Firefighting

Not flammable or combustible. Use extinguishing agents suitable for the surrounding environment (foam, CO2, water spray). Spill Procedures

Contain the leak if safe; absorb with non-combustible material (sand/earth) and dispose of according to local regulations. Operational Advantages of ULTIMER 7752 Understanding the Nalco ULTIMER 7752 Safety Data Sheet

The shift to ULTIMER technology often results in measurable cost and environmental benefits:

Increased Efficiency: In refinery case studies, solids capture efficiency increased from an average of 92% to 98%.

Waste Reduction: Can reduce hazardous waste by over 180 tons per year in large-scale operations.

Simplified Dosing: It is readily soluble in water and does not require specialized polymer activation equipment or long "aging" times. How to Access the Official MSDS

For the most up-to-date and region-specific Safety Data Sheet, users should visit the Ecolab SDS Database. Because chemical formulations and regulations vary by country, it is important to search using the specific product name and your local region. 🧪 Safety Data Sheet Spotlight: NALCO ULTIMER 7752

If you are a current customer, you can also request documentation through your Nalco Water representative or via the Veolia Water Technologies portal for related water treatment services. ULTIMER Polymer Technology | Ecolab

Important Notice: The product Nalco Ultimer 7752 is a water treatment chemical (typically a coagulant/flocculant) marketed by Ecolab (the parent company of Nalco).

Because chemical formulations are proprietary and Safety Data Sheets (SDS) are updated regularly, you must obtain the official, current document directly from Ecolab or your local distributor to ensure legal compliance and safety.

Below is a representative summary based on typical product data for this class of chemical. This content is for informational purposes only and should not be used as a substitute for the official legal SDS.

🧪 Safety Data Sheet Spotlight: NALCO ULTIMER 7752

Product Identifier: NALCO® ULTIMER™ 7752 Manufacturer: Nalco Water (An Ecolab Company) Recommended Use: Coagulant / flocculant for industrial wastewater treatment, primary clarification, and sludge dewatering.

3. Composition and Ingredients

  • Chemical Nature: Aqueous solution of an organic polymer.
  • Key Ingredient: Typically contains Polyamine or PolyDADMAC (Polydiallyldimethylammonium chloride) based copolymers.
  • Note: Specific percentages of composition are often withheld as trade secrets in public summaries, but are listed in the full proprietary SDS.

🔥 Fire Fighting Measures

  • Flash Point: >200°F (93°C) – Not combustible.
  • Hazardous decomposition: Acrid smoke, carbon monoxide, carbon dioxide, nitrogen oxides.
  • Extinguishing media: Water fog, CO2, foam, dry chemical.

Section 3: Emergency Response – From Paper to Action

The ultimate test of an MSDS is whether it can guide a panicked responder. For Ultimer 7752, the MSDS provides specific steps that must be practiced in advance.

  • Accidental Release Measures (Section 6): The MSDS instructs: "Contain spill. Vacuum or scoop spilled material for recovery or disposal. Do not wash to sewer." A useful essay must highlight that water washing is forbidden because it only dilutes the polymer, making it harder to collect and increasing environmental spread.
  • First Aid (Section 4): The MSDS gives counterintuitive advice for eye contact: "Irrigate with water for at least 15 minutes, lifting upper and lower lids occasionally." The useful nuance is that because the polymer is sticky, simply flushing without manually lifting the lids is ineffective. Additionally, for skin contact, removing contaminated clothing before washing is critical, as the polymer can hold the irritant against the skin.
  • Fire Fighting (Section 5): The product is not flammable, but the MSDS warns that fire may produce carbon monoxide, nitrogen oxides, and acrid smoke. Firefighters must use SCBA (Self-Contained Breathing Apparatus), not just a dust mask.

2. Composition / Information on Ingredients

  • Chemical Nature: Aqueous solution of a polyepiamine or similar polymeric coagulant.
  • Ingredients:
    • Active Polymer (Proprietary).
    • Water.
    • Note: Specific chemical identity and exact percentages are often withheld as a trade secret per OSHA/GHS regulations.

First aid (short)

  • Skin: rinse with plenty of water and remove contaminated clothing.
  • Eyes: rinse cautiously with water for several minutes; seek medical attention if irritation persists.
  • Inhalation: move to fresh air; get medical help if breathing is difficult.
  • Ingestion: rinse mouth; do NOT induce vomiting; seek medical advice.

Main Menu