Updating the firmware on an MXQ Pro 4K Android TV box via USB is a common method to fix software bugs, improve performance, or upgrade the Android version. This process typically requires a PC, a male-to-male USB cable, and the correct firmware image file. 🛠️ Prerequisites A PC: Running Windows (7, 10, or 11). USB Cable: A USB Type-A to Type-A (Male-to-Male) cable.
Amlogic USB Burning Tool: The standard software used for flashing these devices.
Firmware File: A specific .img file tailored to your device's chipset (e.g., S905W, S905X, or RK3229). 📋 Step-by-Step Installation Guide 1. Identify Your Chipset
Before downloading any files, you must verify your hardware. Using the wrong firmware can "brick" the device. Open the box and look at the processor chip. Common labels include S905W, S905X, or Rockchip RK3229. 2. Prepare the Burning Tool Install the Amlogic USB Burning Tool on your PC. Launch the program as an Administrator.
Change the language to English (usually the second menu option).
Click File -> Import Image and select your verified firmware .img file. 3. Connect the Device Do not plug the power adapter into the MXQ Pro yet.
Locate the Reset button (usually hidden inside the AV port). Use a toothpick to press and hold the Reset button.
While holding the button, connect the USB cable to the USB-4 port (this port typically handles data) and the other end to your PC. 4. Flash the Firmware The Burning Tool should show a "Connect Success" status. Ensure Erase Flash and Erase Bootloader are checked. Click Start. Wait for the progress bar to reach 100% and turn green.
Click Stop, unplug the USB, and reconnect the device to your TV. ⚠️ Critical Troubleshooting
Device Not Recognized: Try a different USB port on your PC or a shorter cable.
Stuck at 2% or 4%: This usually indicates a "Low Power" error. Try plugging in the power adapter after connecting the USB while still holding the Reset button.
Verification Failed: Ensure the firmware matches your specific motherboard version (e.g., R329Q_V3.0).
To update the firmware on an MXQ Pro 4K TV box via USB, you typically need to use a PC-based tool because most versions of this device do not support direct "plug-and-play" updates from a USB flash drive. Essential Preparation mxq pro 4k firmware update via usb verified
Identify Your Board: Open the TV box by removing the four bottom screws to check the board version (e.g., R329Q V3.1). Installing the wrong firmware can permanently "brick" the device.
Required Tools: You will need a USB-to-USB (Male-to-Male) cable, a Windows PC, and a small tool like a toothpick for the reset button.
Software: Download the Amlogic USB Burning Tool or Factor Tool (depending on your processor) and the correct firmware ISO/image file for your specific board. Step-by-Step Update Process
Install Drivers: Run the driver installation file (often found within the tool's folder) as an administrator on your PC.
Load Firmware: Open the burning tool on your PC, go to File > Import Image, and select your downloaded firmware file. Enter Recovery Mode: Disconnect power from the MXQ Pro.
Insert a toothpick into the AV port to press and hold the hidden reset button.
While holding the button, connect the TV box to your PC using the USB-to-USB cable. Flash the Firmware:
Once the tool recognizes the device (usually indicated by a "Connect Success" message or a green light), click Start.
Crucial: Do not disconnect the cable or power until the progress bar reaches 100% and shows a "Success" message.
Reboot: Disconnect the box and reconnect it to your TV. The first boot after an update may take several minutes. Alternative: OTA (Over-the-Air) Update
If your device is functional and has an active internet connection, you can try a simpler method: Navigate to Settings > About > System Update.
Click Check for Updates. If a verified update is available, follow the on-screen prompts to download and install it automatically. Updating the firmware on an MXQ Pro 4K
For more specific troubleshooting or finding your board version, you can check community discussions on the LibreELEC Forum or Reddit. How to upgrade firmware android tv box MXQ 4K pro
To update your MXQ Pro 4K firmware via USB, you can use either a PC-to-USB connection (the most reliable "verified" method for unbricking) or a USB flash drive for a standard local update
. Because these boxes use different chipsets (Amlogic or Rockchip), you must first identify your processor to choose the correct tool.
Method 1: Using Amlogic USB Burning Tool (Recommended for PC)
This method is typically used for reviving "bricked" boxes or performing a clean install. Preparation : Download the Amlogic USB Burning Tool and the compatible firmware for your specific motherboard version. Import Firmware : Launch the tool, go to File > Import image , and select your firmware file. Connection Unplug the power from your MXQ Pro. Reset button
(usually located inside the AV port) using a toothpick or pin.
While holding the button, connect the box to your PC using a USB-to-USB (Male-to-Male) : Once the tool detects the device, click
. Release the reset button only after the progress bar begins. Verification
: Wait for the "Success" message. Disconnect and reconnect the box to your TV to verify the new Android version in Settings > About LibreELEC Forum Method 2: Local Update via USB Flash Drive
This is a simpler method if your box is still functional and has a "Local Update" app. Format Drive : Use a FAT32-formatted USB flash drive. File Placement : Create a folder named MXQ_4K_Update
and copy the firmware file into it. Ensure no other files are on the drive. Initiate Update
Insert the drive into the USB port closest to the HDMI port. Update/Backup app on your MXQ Pro. Local Update and navigate to your USB file. : The box will restart and show a progress bar. Do not unplug power during this time. Critical Precautions Chipset Match If you want
: Flashing Amlogic firmware on a Rockchip device (or vice-versa) will brick the unit. Verify your CPU (e.g., S905, S905W, or RK3228) before starting. Power Supply
: Some users find the USB port doesn't provide enough power; if the PC tool doesn't see the box, plug in the power adapter
connecting the USB cable while still holding the reset button.
: If using the Rockchip version of the box, you must install the Rockchip Driver Assistant before the tool will recognize the device. Do you know which
(Amlogic or Rockchip) your MXQ Pro 4K is using so I can provide the specific tool link?
Two working approaches – choose based on your current boot state.
If you want, I can:
Related search suggestions provided.
Important Disclaimer: The "MXQ Pro 4K" is not a single device made by one company. It is a generic term used by dozens of manufacturers (Amlogic S905, S905W, S905X, etc.). Installing the wrong firmware can permanently "brick" your device. This guide focuses on the most common hardware revisions (typically Amlogic S905 series).
Do not use random firmware from YouTube descriptions. Use trusted sources:
.img file) – preferred🔍 Example verified file names (for V2.2):
MXQ_PRO_4K_V2.2_SV6256_20180418.img
MXQ_V3.2_SV6051_20190527_update.zip
Based on community testing, these are the most stable:
| Build Name | Base Android | Best For | Verification Status | | :--- | :--- | :--- | :--- | | ATV Experience 11 | Android 11 (AOSP) | S905W + 8189FTV | Greenlit by 500+ users | | NexBox Ronin | Android 9 (Pie) | S905X + SV6256P | Excellent remote fix | | CoreELEC 20.5 | Linux Kodi | All variants | Verified boot from SD card |
Note: CoreELEC is not Android; it turns your MXQ Pro into a dedicated Kodi media player. Flash via USB Burning Tool using the “CoreELEC USB” method.