Whether you are using the SP Flash Tool to revive a dead device or installing a custom ROM, the scatter file is the most critical component of the process. In this article, we’ll break down what it is, why it matters, and how to get one. What is an MT6755 Scatter File?
A scatter file is a small text document (usually .txt) that acts as a map for your device’s internal storage. MediaTek devices divide their memory into several partitions, such as recovery, system, boot, and userdata.
The MT6755 scatter file tells the flashing software (like SP Flash Tool) exactly where each part of the firmware begins and ends on the physical storage chip (eMMC). Without it, the software wouldn't know where to "drop" the files, potentially leading to a hard-bricked device. Key Information Found in a Scatter File: Platform: MT6755 Project: The specific build name for your device. Partition Index: The order of the storage blocks.
Linear Start Address: The physical starting point of a partition. File Name: The corresponding image file (e.g., system.img). Why Do You Need It?
Unbricking: If your phone is stuck in a boot loop or won't turn on, you need the scatter file to reinstall the factory firmware.
Backing Up: Before modding, developers use the scatter file to "read back" a copy of the existing partitions. mt6755 scatter file
Custom Recovery: To install TWRP, you need the scatter file to target the specific recovery partition.
Bypassing FRP: Some technicians use specific addresses found in the scatter file to format the FRP (Factory Reset Protection) partition. How to Get the MT6755 Scatter File There are two primary ways to acquire this file: 1. Extracting from Stock Firmware
The safest way is to download the official Stock ROM for your specific device model. Once you unzip the firmware folder, the scatter file (usually named something like MT6755_Android_scatter.txt) will be located in the main directory alongside the .img files. 2. Creating One via MTK Droid Tools or Miracle Box
If you can't find your firmware online but your device still boots, you can generate a scatter file directly from the phone. Enable USB Debugging.
Connect to a PC and use a tool like MTK Droid Tools (though compatibility with Helio P10 can be hit-or-miss) or WWR MTK. Whether you are using the SP Flash Tool
The tool reads the partition table and saves it as a text file. How to Use the MT6755 Scatter File with SP Flash Tool Using the file is straightforward, but requires precision:
Install VCOM Drivers: Ensure your PC recognizes the MediaTek Preloader interface. Open SP Flash Tool: Launch the application.
Load Scatter: Click on the "Choose" button next to Scatter-loading File.
Select the File: Navigate to your firmware folder and select MT6755_Android_scatter.txt.
Verify: The tool will automatically populate the list of partitions (Preloader, Recovery, System, etc.). Q2: Can I flash TWRP using the scatter file
Flash: Choose "Download Only" (unless you are performing a full format) and click Download. Connect your powered-off device. Important Safety Warning
Never use a scatter file meant for a different chipset or even a different phone model.
Even if two phones both use the MT6755 (Helio P10) chip, their partition sizes—like the preloader—might differ. Using the wrong scatter file can result in a "Hard Brick," where the device will no longer communicate with the computer at all. Always verify your Hardware Version before proceeding. Conclusion
The MT6755 scatter file is the bridge between your computer and your phone's hardware. By understanding its structure and ensuring you have the correct version for your specific device, you can safely perform deep-level maintenance and customization on your Helio P10 device.
Yes. Replace the recovery partition’s file path with twrp.img, then flash only recovery in SP Flash Tool.
A scatter file is a partition layout table for MediaTek chipsets. Unlike Qualcomm devices that use partition.xml or GPT headers, MediaTek relies on a human-readable .txt file that tells the flashing tool exactly where to write data on the eMMC/UFS storage chip.
Many stock firmware zip files include MT6755_Android_scatter.txt. If missing, extract from system/build.prop or use a generic MT6755 template then adjust partition sizes via adb shell cat /proc/partitions.