Skip to main content

Medima P300 Top [new]

Medima P300 is a high-performance volumetric infusion pump designed for advanced hospital workflows, distinguished from its predecessor (P200) by its integrated Drug Library (DERS) and optional

functions. It is a 1-way intermittent/volumetric pump manufactured by Medima Sp. z o.o. in Poland. Key Technical Specifications Flow Rate Range: 0.1 – 1200 ml/h. ±5% using dedicated Medima Line IV sets. Infusion Volume: Up to 20,000 ml. Battery Life:

Built-in NiMh battery providing up to 15 hours of use (at 25 ml/h) or up to 30 hours (at 5 ml/h), with a 4.5-hour full recharge time. Less than 2.2 kg. Safety Rating:

IP 22 classification; Protective Class II, type CF, defibrillation proof. Advanced Features & Functions Drug Library (DERS):

Stores up to 6,000 drug protocols, organized into 40 Care Units and 40 categories. It supports "Soft" and "Hard" limits to prevent dosing errors. Specialized Modes: medima p300 top

Includes PCA (Patient-Controlled Analgesia), TPN (Total Parenteral Nutrition), and optional TCI/TIVA (Target Controlled Infusion / Total Intravenous Anesthesia) for drugs like Propofol and Remifentanil. Interface:

Features a large 3.2" color touchscreen complemented by a symbolic and alphanumeric keypad for flexible programming. Occlusion Monitoring:

12 adjustable pressure levels (50–900 mmHg) with automatic bolus reduction after occlusion. Connectivity: Fully integrates with hospital data systems (HIS/PDMS) via MedimaNet software for centralized alarm monitoring and therapy records. Operational Benefits

1-way infusion pump - P300 - Medima - intermittent / volumetric Medima P300 is a high-performance volumetric infusion pump

The "Top" Isn't Just a Name; It's a Physics Lesson

Most sanding blocks are homogeneous: the same density foam from the center to the surface. The Medima P300 Top flips the script.

The "Top" refers to a specialized dual-layer foam technology. The base is firm enough to provide rigid, flat sanding pressure—essential for keeping edges crisp and panels true. But the top layer (the "Top") is a softer, high-resilience foam.

Why does this matter? When you hand-sand a contoured surface (like a car spoiler, a guitar body, or a routed edge), a hard block digs in, creating flat spots. A soft sponge rounds over your crisp corners. The P300 Top uses variable resistance. It stays flat on the flats, but compresses gently on the curves.

It’s essentially a smart suspension system for your sandpaper. Warranty: Typically 3 years on the compressor and

Where to Buy and Warranty Information

The Medima P300 Top is available through specialized HVAC wholesalers and online climate control retailers. Always verify you are buying the "P300 Top" (Ceiling type) and not the "P300 Wall" (Wall type) to avoid confusion.

3. Test Benches

For component testing (hoses, valves, cylinders), the precise pressure regulation of the P300 Top (accuracy ±0.5%) makes it an industry standard.

Technical Specifications: Breaking Down the Numbers

To appreciate the Medima P300 Top, you must look at the data sheet. Here are the core specifications that set it apart:

| Specification | Value | | --- | --- | | Max Operating Pressure | 300 bar (continuous) | | Peak Pressure | 350 bar (intermittent) | | Flow Rate (Oil) | 12 L/min (at 1450 RPM) | | Power Requirement | 4.0 kW – 5.5 kW electric motor | | Hydraulic Fluid | ISO VG 32 to VG 46 | | Operating Temperature | -20°C to +80°C | | Protection Class | IP 54 (Top version includes sealed electronics) | | Noise Level | < 75 dB(A) at 1m |

Installation Requirements: What You Need to Know

Before purchasing a Medima P300 Top, ensure your building meets these criteria:

Pro Tip: Always hire a certified HVAC technician for installation. Improper drainage on a ceiling cassette is the number one cause of water damage claims.