This guide outlines the programming and operation for the IPSA TE-102-34-20
digital timer, a device designed for automating electrical loads like lighting or irrigation systems. 1. Preparation and Initial Reset
Before programming, ensure the internal battery is charged. If the screen is blank, plug the device into a power outlet for at least 24 hours. Reset the Device: Use a thin object (like a paperclip) to press the "Master Clear"
button for approximately 5 seconds. This clears all previous settings and restarts the clock at 00:00 on Monday. 2. Setting the Current Time and Day You must set the real-time clock before creating schedules. Set the Day: Hold down the button and repeatedly press ) until the correct day appears at the top of the screen. Set the Hour: While holding ) to reach the current hour. Set the Minutes: While holding ) to set the exact minutes. 3. Programming On/Off Schedules The TE-102 series typically supports up to 16 or 20 programs COMO PROGRAMAR UN TIMER DIGITAL
To program your IPSA TE 102 digital timer, you can follow these standard steps common to most IPSA and similar digital timer models. 1. Initial Setup & Reset
If the screen is blank or you want to clear previous settings, plug the timer into a power outlet for at least 30 minutes to charge the internal battery. Then:
Locate the small "R" (Reset) button (usually in a small hole).
Press it with a paperclip or pin for about 5–6 seconds until the screen clears and shows a default time (like 0:00 or Monday). 2. Setting the Current Time To set the local time and day: Press and hold the "C+" or "CLOCK" button.
While holding it, press "W+" or "WEEK" repeatedly until the correct day of the week is displayed. manual temporizador digital ipsa te 102 34 20 updated
Still holding "CLOCK," press "H+" or "HOUR" to set the hour.
Still holding "CLOCK," press "M+" or "MIN" to set the minutes. Release the "CLOCK" button when finished. 3. Programming On/Off Times
You can typically set multiple "Events" (Programs). Each has an "ON" time and an "OFF" time. Manuales – Fichas Técnicas - IPSA
Você pode tentar fazer uma busca online utilizando termos como:
Isso pode levar você a sites que oferecem o manual para download ou a páginas de suporte técnico.
Siga estos pasos para crear una rutina de encendido y apagado.
Paso 1: Entrar en modo programación
1 ON (Primer evento de encendido).Paso 2: Configurar el encendido
MON-FRI para de Lunes a Viernes, o MO TU WE para días específicos).Paso 3: Configurar el apagado
1 OFF (Primer evento de apagado).Paso 4: Guardar y Salir
Nota: Puede repetir este proceso para añadir más eventos (2 ON, 2 OFF, etc.). El dispositivo suele permitir hasta 8 u 16 pares de eventos.
El temporizador digital IPSA TE-102/34/20 es un controlador compacto para gestión de horarios en aplicaciones residenciales e industriales ligeras: encendido/apagado programado de luces, bombas, calentadores, paneles publicitarios y otros equipos eléctricos. Esta guía actualizada explica sus características, especificaciones técnicas, instalación, programación, modos de operación, mantenimiento y solución de problemas.
The IPSA TE 102 34 20 supports multiple operating modes. Below is the updated list (based on 2023-2025 firmware revisions). Note your specific unit might have 8 or 10 functions.
| Mode Code | Symbol | Function Name | Real-World Application | | :--- | :--- | :--- | :--- | | A | ⌛ E | On-Delay (Power On Delay) | Motor soft-start; delay fan after boiler ignition | | B | ⏳ G | Off-Delay (Interval on trigger) | Keep a conveyor belt running after a stop button | | C | ⏲️ I | Flicker (Pulse start – OFF first) | Warning beacons; blinking industrial lights | | D | 🔄 C | Cyclic (ON first – symmetrical) | Water drainage: pump 5s on, 5s off | | E | 💾 L | Latching (Memory relay) | Security shutters; remote control storage | | F | 🔁 S | Strobe / One-shot (Trigger on pulse) | Door strike release; single activation |
How to select a function: Turn the rotary dial to the desired letter (A-F). The LED display will blink or change to indicate the mode.
Note: Button labels are usually: CLOCK, PROG, ON/OFF (or +), DAY, RST. This guide outlines the programming and operation for
Step 1: Reset (if new or glitched)
RST (recessed button) with a paperclip.Step 2: Set Current Time & Day
CLOCK for 3 seconds.+ to set the minute, press CLOCK.CLOCK.CLOCK.Step 3: Set Programs (P1 to P10)
PROG. Screen shows "P1" and "--:-- --".ON/OFF so "ON" blinks.+ to set hour/min. Press PROG to confirm ON time.ON/OFF so "OFF" blinks.PROG.DAY repeatedly: Mo, Tu... Su, MoTuWeThFr, SaSu, MoTuWeThFrSaSu.PROG to save.Step 4: Enable/Disable Programs
PROG to scroll to a program (e.g., P3).ON/OFF to toggle: ON (active) or OFF (inactive).OFF.Step 5: Manual Override
I = Always ON, 0 = Always OFF, AUTO = Follow programs.El temporizador digital IPSA TE-102 es un dispositivo de montaje en raíl DIN diseñado para controlar la conexión y desconexión de cargas eléctricas (iluminación, calefacción, bombas, etc.) basándose en una programación horaria semanal. Cuenta con una pantalla LCD y botones táctiles para su configuración.
Características Principales: