Leica TCR805 Go to product viewer dialog for this item. is a professional surveying instrument part of the TPS800 series, designed primarily for engineering, building, and construction surveys. Its user manual provides a comprehensive guide on safety, setup, and various operational programs like setting out and volume determination. Key Technical Specifications is valued for its precision and integrated data management. Accuracy: It features angle accuracy ( mgon) and distance precision of

Measurement Modes: Equipped with both Infrared (IR) for prism measurements and Reflectorless (RL) modes using a visible red laser. Storage: Internal memory can store approximately data blocks or up to fixpoints. Distance Range: Can measure up to ) in prismless mode, with prism ranges extending up to depending on the model. Essential Operational Procedures

Detailed instructions in the Leica TCR805 User Manual cover every stage of fieldwork: USER MANUAL

Final Checklist for Every TCR805 User

  • [ ] Have you read the "Preparation for Measurement" chapter in the last month?
  • [ ] Did you perform the iX calibration today?
  • [ ] Is your prism constant set correctly for the prism in use?
  • [ ] Did you record PPM (temp & pressure) in your job notes?
  • [ ] Have you backed up your data to a PC?

5. Measuring Modes (Critical for TCR805)

  • Press SHIFT → EDM to cycle modes:
    • IR (infrared) – for prism (standard, long range up to 3000m)
    • RL (reflectorless) – for walls, roads, trees (no prism, max 80m)
    • LONG – low signal prism mode (fog, long range)

Warning: In RL mode, do not aim at shiny surfaces (car mirrors, water) or people’s eyes.

8. Data Transfer (Exporting Work)

Once fieldwork is complete:

  1. Turn off the instrument.
  2. Remove the PCMCIA card (if applicable) or connect via USB cable.
  3. Transfer .gsi files to a PC.
  4. Use Leica Geo Office (LGO) or third-party survey software to convert raw data into CSV, DXF, or DWG formats for CAD processing.
عرض الخط AAAGoldenLotus Stg1_Ver1 Regular

Leica Tcr805 Total Station User Manual Work ★ Direct

Leica TCR805 Go to product viewer dialog for this item. is a professional surveying instrument part of the TPS800 series, designed primarily for engineering, building, and construction surveys. Its user manual provides a comprehensive guide on safety, setup, and various operational programs like setting out and volume determination. Key Technical Specifications is valued for its precision and integrated data management. Accuracy: It features angle accuracy ( mgon) and distance precision of

Measurement Modes: Equipped with both Infrared (IR) for prism measurements and Reflectorless (RL) modes using a visible red laser. Storage: Internal memory can store approximately data blocks or up to fixpoints. Distance Range: Can measure up to ) in prismless mode, with prism ranges extending up to depending on the model. Essential Operational Procedures leica tcr805 total station user manual work

Detailed instructions in the Leica TCR805 User Manual cover every stage of fieldwork: USER MANUAL Leica TCR805 Go to product viewer dialog for this item

Final Checklist for Every TCR805 User

  • [ ] Have you read the "Preparation for Measurement" chapter in the last month?
  • [ ] Did you perform the iX calibration today?
  • [ ] Is your prism constant set correctly for the prism in use?
  • [ ] Did you record PPM (temp & pressure) in your job notes?
  • [ ] Have you backed up your data to a PC?

5. Measuring Modes (Critical for TCR805)

  • Press SHIFT → EDM to cycle modes:
    • IR (infrared) – for prism (standard, long range up to 3000m)
    • RL (reflectorless) – for walls, roads, trees (no prism, max 80m)
    • LONG – low signal prism mode (fog, long range)

Warning: In RL mode, do not aim at shiny surfaces (car mirrors, water) or people’s eyes. Final Checklist for Every TCR805 User

8. Data Transfer (Exporting Work)

Once fieldwork is complete:

  1. Turn off the instrument.
  2. Remove the PCMCIA card (if applicable) or connect via USB cable.
  3. Transfer .gsi files to a PC.
  4. Use Leica Geo Office (LGO) or third-party survey software to convert raw data into CSV, DXF, or DWG formats for CAD processing.

روابط إعلانية