Kyocera Fs1120mfp Scanner Driver Windows 10 Fix __link__ <2K>

Here’s a full-feature fix guide for getting the Kyocera FS-1120MFP scanner working on Windows 10 (including 32-bit & 64-bit, USB/network).

Method 4: Fix USB Power Management (Hidden Windows 10 Issue)

Even with correct drivers, Windows 10 cuts power to the FS-1120MFP’s scanner sensor. This is the #1 reason for "Scanner not responding" after the PC wakes from sleep. kyocera fs1120mfp scanner driver windows 10 fix

Step 5: Force the Scanner Driver to Register (If still not detected)

If Windows still doesn't see the scanner: Here’s a full-feature fix guide for getting the

  1. Open Device Manager.
  2. Right-click on the computer name at the top → Add legacy hardware.
  3. Click Next → Install the hardware that I manually select from a list.
  4. Choose Imaging devices → Next → Have Disk.
  5. Browse to the folder where you extracted the drivers (look for a .inf file, e.g., kynwtwn.inf or similar).
  6. Select Kyocera FS-1120MFP Scanner and install.

Step 4 – Configure Scanner

  1. Open Kyocera Client Tool from Start Menu.
  2. Go to Device Settings → Scanner → ensure "TWAIN" is enabled.
  3. Set Connection → USB or Network (IP address).

Step 7: USB vs Network Troubleshooting

  • USB connection: Try a different USB port (preferably USB 2.0, not 3.0). Reconnect after driver install.
  • Network connection: If using network scanning, assign a static IP to the FS-1120MFP via its web interface. Then in Kyocera Control Center, add the scanner manually by IP address.
Lost your password?