Skip to main content

Infineon Memtool [extra Quality] Download Link -

Infineon MemTool is a free software utility used for erasing, programming, and verifying flash memory on Infineon microcontrollers, such as the AURIX™, TriCore™, and XMC™ families. Direct Download & Official Resources

To ensure you have the most secure and up-to-date version, you should download MemTool directly from the official Infineon Software Tools portal:

Official Tool Page: Infineon MemTool Software Portal — This is the primary location for the latest installer and documentation.

Alternative Support Site: Some legacy or specific device versions are shared via the Infineon Developer Community. Key Capabilities

Flash Management: Erase, program, and protect specific flash sections or entire memory areas.

Hardware Support: Comes with pre-configured files for Infineon evaluation boards using the onboard wiggler. It also supports the miniWiggler for custom hardware.

Batch Scripting: For production or automated testing, it supports command-line operations and batch file execution. Technical Troubleshooting Tips

If you encounter issues during installation or use, consider these common community-sourced solutions:

Installer Errors: If you see "Can't create Memtool user interface," users recommend fully uninstalling previous versions, clearing the %temp% directory, and restarting before installing the latest version (e.g., v6.0 or higher).

Connection Issues: Ensure your hardware (like the miniWiggler or FTDI cable) is correctly recognized by Windows. Sometimes a specific reprogramming procedure involving hardware shorts is required for certain boards to enter boot mode.

Sector Locking: If you cannot clear the flash, it may be due to enabled sector locking or unknown User Configuration Blocks (UCB) keys, which are common in pre-programmed or protected chips.

Quick Note: Avoid third-party "driver update" or "software informer" sites for this tool, as they may host outdated or modified versions. Always stick to the official Infineon portal.

Are you trying to connect to a specific microcontroller family, like the AURIX TC3xx or XMC1000? memtool - jlink batch file - Infineon Developer Community

Infineon MemTool: Essential Download and User Guide The Infineon MemTool is a free-of-charge, Windows-based software utility designed for on-chip flash memory programming. It is a critical tool for developers working with Infineon microcontrollers, allowing them to erase, program, verify, and protect selectable flash sections.

The latest stable version, Version 2024.01, was released on May 15, 2024. Official Infineon MemTool Download Link

To ensure you have the safest and most up-to-date version, always use the official Infineon Software Tools Portal. Platform: Windows (x86/x64) Version: 2024.01 Format: Single executable (.exe) installer Core Features and Functions

MemTool is primarily intended for evaluation purposes and handling on-chip FLASH and OTP (One-Time Programmable) memory. Key capabilities include:

Flash Operations: Complete or sectoral erasing, programming, and verification of memory modules.

Intel-Hex Support: Allows users to open Intel-Hex files and write their contents to the target memory.

Protection Management: Setting and resetting chip or sector protection (on-chip only).

Ready-to-Use Configs: Includes configuration files for the full range of Infineon evaluation boards.

Integration: Often bundled with the Infineon Device Access Server (DAS) for JTAG and DAP communication. Supported Microcontroller Families

MemTool supports a wide variety of Infineon MCU derivatives, including: AURIX™: TC2xx and TC3xx series. TriCore™: Advanced 32-bit microcontrollers. XMC™: Including XMC1000 and XMC4000 families. XC Series: Legacy XC800, XC16x, and XC2000 families. How to Install and Set Up

Download: Obtain the installer from the Official Download Page.

Run Setup: Execute the setup.exe or IMT4.exe file with Administrator permissions. Configure Target: Open MemTool and go to Target > Change.

Select the appropriate configuration file for your specific Infineon evaluation board or application kit. Establish Connection: For on-board wigglers, use standard USB connections.

For custom boards, use an external Infineon miniWiggler via DAP or JTAG. infineon memtool download link

Standard RS232/UART (ASC) boot loader connections are also supported.

Note: For the latest device support, especially for newer generations like PSoC™, Infineon recommends using the ModusToolbox™ Programming Tools package. Infineon Memtool

License Release notes. Export control. Windows (x86-x64) Released. May 15, 2024. Version 2024.01. Infineon Developer Center Infineon Memtool

Telemetry Settings. We collect anonymous data to help us to understand how the Infineon Developer Center is used, its performance, Infineon Developer Center Solved: Infineon Memtool installation

22 Jun 2023 — Moderator. Anupama_A. Moderator. ‎26 Jun 2023. Hi @rieterneon , You could refer to the following link for DAS server installation. Infineon Developer Community Infineon MemTool - Supports MCU Devices

The Infineon Memtool is a free, PC/Windows-based utility designed for on-chip flash programming, specifically for erasing, programming, verifying, and protecting selectable flash sections. Official Download Information

The software is primarily available through the official Infineon Software Tools portal. Platform: Windows 10 (64-bit) or newer.

Access Requirement: You may need to create a free Infineon account using a valid email address to access the download link on the official developer center.

Latest Version: Version 2025.04 is the current release as of early 2026. Key Features

On-Chip Flash Management: Handles erasing, programming, and verification for on-chip FLASH and OTP memory.

Ready-to-Use Configs: Includes pre-configured files for the full range of Infineon MCU evaluation boards and application kits.

Flexible Communication: Supports connections via DAS (Device Access Server), UART, DAP, and JTAG.

Batch Mode: Features a limited set of batch commands to automate connecting and programming devices. Supported Microcontroller Families

Memtool is compatible with a wide range of Infineon MCU derivatives, including: AURIX™: TC2xx, TC3xx, and preliminary support for TC49x. TriCore™: General support for the TriCore family. XMC™: XMC1000 and XMC4000 series.

Legacy Families: Supports XC800, XC16x, XC2000, and XE166 families. Hardware Requirements Host PC: Standard RS232 port or USB-to-target connections.

Interfaces: For custom boards, the Infineon miniWiggler is typically required for JTAG and DAP connections.

For detailed usage steps, you can refer to the official Memtool Tutorial PDF which covers everything from UI navigation to troubleshooting. Infineon Flash Programmer Memtool for XMC1000 Family

You can download the Infineon Memtool (latest version 2025.04) directly from the official Infineon Software Tools Portal 📥 Download & Technical Links Main Tool Page Infineon Memtool Official Portal (Requires login for download) Release Notes V4.9.0 Release Documentation XMC1000 Family Flash Programming Guide 🛠️ Core Capabilities

Memtool is a free Windows-based utility designed for on-chip flash programming. Infineon Developer Community Flash Operations

: Erase, program, verify, and protect selectable flash sections. File Support : Directly programs files into memory. Connectivity : Supports PC-to-target connections via Hardware Support : Works with standard miniWiggler or onboard wiggler interfaces. Infineon Developer Community 📱 Supported Microcontrollers

The tool is compatible with a wide range of Infineon families: (TC2xx, TC3xx) TriCore™ (XMC1000, XMC4000) : Memtool is primarily intended for evaluation purposes

and development rather than high-volume production programming. Infineon Developer Community batch commands

The Infineon MemTool is a free-of-charge, Windows-based software utility primarily used for on-chip Flash programming and verification for Infineon microcontrollers. Download Links

You can access MemTool through several official Infineon channels:

Direct Download: The latest version and official release notes are typically available on the Infineon MemTool Product Page.

Developer Center: It is also accessible via the Infineon Developer Center (IDC), where you can manage installations through the IDC Launcher. Infineon MemTool is a free software utility used

Tools Archive: Older or specific versions can sometimes be found in the Infineon Tools Archive. Key Features

MemTool provides essential functions for embedded development and evaluation: Infineon MemTool - Supports MCU Devices

7. Troubleshooting

Disclaimer: Software versions and download locations are subject to change by Infineon Technologies. Always refer to the official Infineon website for the most current version.

Infineon MemTool is a free software utility for programming AURIX, XC2000, XC16x, XC800, and TriCore microcontrollers, supporting on-chip flash operations via DAP, SWD, or JTAG interfaces. The tool, which requires a myInfineon account to download, supports Windows 10 and 11, and includes both a GUI and a Command Line Interface (CLI) for automated production. You can download the software at the official Infineon website.

Introduction to Infineon MemTool

Infineon MemTool is a software tool used for in-system programming of Infineon's microcontroller and flash memory devices. It allows users to program, erase, and verify the contents of the device's memory. MemTool is commonly used in the development and production of embedded systems, automotive control units, and other industrial applications.

What is Infineon MemTool used for?

Infineon MemTool is used for various applications, including:

Features of Infineon MemTool

Some of the key features of Infineon MemTool include:

Where to download Infineon MemTool

The Infineon MemTool software can be downloaded from the official Infineon Technologies website. Here is the download link:

https://www.infineon.com/cms/en/tools/ memtool/

System Requirements for Infineon MemTool

To use Infineon MemTool, your system should meet the following requirements:

Installation and Usage of Infineon MemTool

To install and use Infineon MemTool, follow these steps:

  1. Download the MemTool software from the Infineon website.
  2. Run the installation program and follow the on-screen instructions.
  3. Launch MemTool and select the device type and communication interface.
  4. Follow the on-screen instructions to program, erase, or verify the device memory.

Support and Resources

If you encounter any issues or have questions about using Infineon MemTool, you can:

By following these steps and using Infineon MemTool, you can efficiently program and verify your Infineon microcontroller and flash memory devices.

Important Note: Memtool is proprietary software primarily for internal Infineon use and for specific customers under NDA. It is not available as a public, unrestricted download on Infineon's main website.

Follow the steps below to legally obtain the correct version.

Conclusion & Final Safe Download Summary

DO NOT search for random third-party links.
DO use only the official Infineon pathways:

  1. Download Center → search “Memtool” → filter by product family.
  2. Direct product page (XMC, XC800, TriCore) → Tools tab.
  3. MyInfineon login required only for some older versions.

Final verified link structure (replace with current live URL as Infineon periodically changes paths):
https://softwaretools.infineon.com/tools/com.ifx.tb.tool.memtool

If that link redirects, start at infineon.com and use the site search for “Memtool download”.

With the correct Memtool version in hand, you can reliably program thousands of Infineon microcontrollers without a full IDE. Always scan any downloaded file with Windows Defender – official packages will be signed by “Infineon Technologies AG”. Connection Issues: Ensure the correct DAS drivers are

Last updated: May 2026. For the absolute latest link, please visit Infineon’s official community forum or your local Infineon distributor portal.

Infineon MemTool Download Link:

You can download Infineon's MemTool from the official Infineon website. Here's a step-by-step guide:

  1. Visit the Infineon website: www.infineon.com
  2. Click on "Design & Development" > "Software & Tools" > "MEM Tool"
  3. Select the product category and the specific product you are using (e.g., microcontroller, memory, or interface ICs)
  4. Click on "Download" and then select "MEM Tool" as the software tool
  5. Choose the desired version of MemTool (e.g., latest version or a specific version compatible with your product)
  6. Fill out the registration form (if required) and agree to the terms and conditions
  7. Click on the download link to obtain the MemTool software

Alternatively, you can directly access the Infineon MemTool download page using this link: https://www.infineon.com/cms/en/design-support/software-tools/mem-tool

MemTool Overview:

Infineon's MemTool is a software tool used for in-system programming (ISP) of Infineon microcontrollers and memory products. It provides an easy-to-use interface for flashing, reading, and writing data to Infineon's devices. MemTool supports various communication interfaces, including UART, I2C, SPI, and CAN.

System Requirements:

Before downloading and installing MemTool, ensure your system meets the minimum requirements:

The Infineon MemTool (Infineon On-Chip Memory Programming Tool) is a specialized utility used for erasing, programming, and verifying on-chip flash memory across various Infineon microcontroller families, including AURIX/TriCore, XMC, XC2000, and XC800. Official Download Link

The primary source for the latest version is the Infineon Software Tools portal.

Registration Required: Note that you typically need to be logged into an Infineon Developer Community account to access the executable files.

Version History: As of mid-2022, version 4.9.0 was a stable release.

Alternative Access: Some users utilize the Infineon Developer Center (IDC) launcher to manage and update development tools like MemTool automatically. Key Technical Capabilities

Device Support: Handles FLASH and OTP memory for families such as AURIX (TC2xx, TC3xx), XMC1000/4000, and legacy series like XC16x.

Communication: Supports standard RS232 ports for legacy targets and JTAG/DAP communication via the Infineon Device Access Server (DAS) for modern XMC and TriCore chips.

OS Compatibility: Officially supported on Windows 10 and newer. Common Usage Scenarios

Binary Flashing: Developers often use it to write Intel-Hex files directly to the microcontroller when they are not using a full IDE like AURIX Development Studio.

Batch Programming: It can be integrated into script-based workflows (e.g., using J-Link scripts) for production-line flashing.

Configuration: Includes ready-to-use configuration files for Infineon evaluation boards and application kits.

Pro-Tip: If you encounter a "Can't create Memtool user interface" error during installation, try clearing your %TEMP% folder and restarting your PC before a fresh install. memtool - jlink batch file - Infineon Developer Community

Here is the official download link for Infineon Memtool (currently maintained as part of the AURIX™ Development Studio or as a standalone tool for older controllers):

Official Infineon Download Page:
https://www.infineon.com/cms/en/product/microcontroller/aurix-development-studio/

Direct Memtool standalone versions are sometimes found under the "Tools" section for specific device families like XC800, XC166, XC2000, or TC2xx/TC3xx. You may need to create a free MyInfineon account to download.

Can I use Memtool with 3rd-party debuggers?

Limited. Official support exists for Infineon’s own DAP miniWiggler and standard UART bootloader. JTAG with Segger J-Link is not officially supported (use J-Flash instead).

4. Step-by-Step Download Procedure

To download the software, follow the procedure outlined below.

Critical Warning: Avoid Fake Download Links

Searching “Infineon Memtool download” on Google or Bing often leads to dangerous pages:

Only two legitimate sources exist: Infineon’s official product pages and the Infineon Download Center.

3) Steps to find and download MEMTool from Infineon

  1. Open your web browser.
  2. Go to Infineon’s official website (infineon.com).
  3. In the site search box enter “MEMTool” or “MEMTool download”.
  4. From the search results, open the MEMTool product or support page (look for pages under “Products”, “Tools & Software”, or “Design Resources / Software & Tools”).
  5. On the MEMTool page locate the download link for the latest Windows installer or ZIP package. Confirm the version and release notes.
  6. Download the installer or archive to your PC.

Step 1: Determine If You Actually Need Memtool

Memtool is a low-level flash programming tool for Infineon microcontrollers (XC800, XC166, XC2000, XMC4000, TriCore™, AURIX™).
Alternatives you can use instead (publicly available):

Guide: Downloading and Installing Infineon MEMTool