Hp Fxn1 E93839 Motherboard Specs Updated Page

HP FXN1 E93839 is a legacy, proprietary motherboard primarily found in the HP Compaq 8200 Elite

series desktops. It uses an Intel-based architecture designed for business-class performance and stability. Quick Facts Intel Q67 Express UDIMM (non-ECC) Form Factor: Proprietary ATX-based design Common Systems: HP Compaq 8200 Elite (CMT and SFF variants) Technical Specifications

The board is optimized for second-generation Intel Core processors (Sandy Bridge architecture). Techno Group Lithuania Processor Support:

Officially supports 2nd Gen Intel Core i3, i5, and i7 processors, such as the Core i5-2400. While physically similar to LGA 1150/1151, it is not compatible with newer 4th-gen or 6th-gen CPUs. Memory Architecture:

Supports dual-channel configurations. It typically handles up to 16GB or 32GB of DDR3 RAM depending on the specific BIOS version and module density. Expansion Slots: (for discrete graphics) 1x PCIe x4 (open-ended in some revisions) 1x PCIe x1 1x Legacy PCI slot (model dependent) Rear I/O Ports: Multiple USB 2.0 ports (typically 6) 1x VGA and 1x DisplayPort 1x RJ-45 Ethernet Audio Line-in/Line-out and Microphone jacks PS/2 keyboard and mouse ports (standard for its era) Compatibility and Upgrades

Because of its proprietary nature, this motherboard uses a unique power connector rather than a standard 24-pin ATX plug.

HP Desktop PCs - Motherboard Specifications, Row | undefined hp fxn1 e93839 motherboard specs updated

The HP FXN1 E93839 is a reliable, enterprise-grade motherboard originally pulled from the widely deployed HP Compaq 8200 Elite series desktops. Despite its age, its high manufacturing standards make it a staple in the second-hand market for budget setups, secondary home servers, or arcade emulation rigs.

Before purchasing or attempting to transplant this board into a custom case, check these critical specifications and proprietary limitations. 📋 Comprehensive Specifications 🧠 Core Hardware & Performance Socket Type: LGA 1155 (Socket H2) Chipset: Intel Q67 Express

CPU Support: Compatible with Intel 2nd Generation Core i3, i5, and i7 processors (Sandy Bridge architecture) Memory Architecture: Dual-channel support DIMM Slots: 4 x DDR3 slots

Maximum RAM: Supports up to 32GB DDR3 RAM at 1333 MHz or 1600 MHz 🔌 Expansion & Connectivity

PCIe Lanes: Features 1 x PCI Express x16 slot for dedicated graphics Storage Ports: Multiple SATA II / III connectors

Rear I/O Ports: Features DisplayPort, VGA, USB 2.0 ports, Gigabit Ethernet, and PS/2 keyboard/mouse ports HP FXN1 E93839 is a legacy, proprietary motherboard

Integrated Graphics: Relies on Intel HD Graphics found on compatible CPUs ⚠️ Critical Proprietary Roadblocks

Because this board was designed exclusively for HP's business ecosystems, standard builders will run into several massive hardware hurdles:

📐 Custom Form Factor – The physical mounting screw layout is a "modified ATX" or custom Micro-ATX shape. It will not easily drop into a standard third-party PC case without physical modification.

⚡ Proprietary Power Connections – This board does not use a standard 24-pin ATX power supply connector. It relies on HP's proprietary multi-pin power connectors. You will need a compatible HP power supply or specific aftermarket adapter cables to supply power.

🎛️ Front Panel Pinouts – The headers for the power button, power LED, and reset switch are non-standard. Mapping standard case cables to this board requires custom wiring or an enthusiast mapping diagram. HP motherboard E93839 FXN1 With Intel I5-6500 - eBay

The HP FXN1 (E93839) motherboard is a proprietary board primarily used in HP Compaq 8200 Elite Small Form Factor (SFF) No Overclocking: The HP BIOS (American Megatrends) locks

series business desktops. While "E93839" is a common regulatory marking found on various HP and Dell boards, the variant is specific to HP systems featuring the Intel Q67 Express support.hp.com Core Technical Specifications Socket Type : LGA 1155 (Socket H2). : Intel Q67 Express. Memory Support 4 x DDR3 DIMM slots. Supports dual-channel architecture. Maximum Capacity: Officially supports up to

(8GB x 4), though some service guides originally listed a 16GB limit. Speeds: DDR3 1333 MHz. Expansion Slots 1 x PCI Express x16 (for low-profile graphics cards). 1 x PCI Express x1. 2 x PCI slots (standard in many 8200 SFF configurations). Storage Interfaces SATA II (3.0 Gb/s) and SATA III (6.0 Gb/s) ports.

No integrated M.2 NVMe slots; upgrades require SATA-based SSDs. h10032.www1.hp.com CPU Compatibility (2nd Gen Intel Core) This motherboard specifically supports Sandy Bridge architecture processors: www.amazon.co.uk Intel Core i7 : i7-2600. Intel Core i5 : i5-2500, i5-2400. Intel Core i3 : i3-2120, i3-2100. Pentium/Celeron : G850, G630. www.ebay.com External I/O Ports HP motherboard E93839 FXN1 With Intel I5-6500 - eBay

7. Known Issues & BIOS Quirks

  • No Overclocking: The HP BIOS (American Megatrends) locks multiplier and voltage controls.
  • Secure Boot: Can be disabled, but "CSM" (Legacy boot) is required for Linux or older Windows installs.
  • Fan Noise: The BIOS fan curve is aggressive. If you replace the stock cooler, use a high-pressure fan, or the BIOS will run it at 100% speed constantly.
  • Windows 11: This board does not have a TPM 2.0 module. It is officially unsupported. Use Windows 10 or Linux.

⚠️ Non-standard features:

  • No standard I/O shield – integrated into chassis.
  • Proprietary mounting holes – will not fit any standard case.
  • No 3.3V standby on some pins – affects some SATA SSDs.
  • HP proprietary fan connector – standard 4-pin PWM fans may not work.
  • BIOS whitelist – non-HP Wi-Fi cards cause POST error (System Halted).
  • No legacy PCI – PCIe only.

2. CPU Support (The FM2 Limitation)

This is the most critical spec to understand. The FXM1 uses Socket FM2, not the newer FM2+.

  • Compatible CPUs: AMD Trinity and Richland APUs (A10, A8, A6, A4, and E-Series).
  • What does NOT work: AMD Kaveri, Godavari, or any FM2+ chip (A10-7870K, etc.).
  • Best CPU upgrade: AMD A10-6800K (Quad-core, 4.4 GHz Turbo). Note: Overclocking is locked by the HP BIOS.
  • Lowest power option: AMD A6-5400K (65W).

Verdict: Do not buy an FM2+ CPU for this board. It will physically fit, but the board will not POST.

Close Menu