Vgate Maxiscan Vs890 |verified| | How To Update

Here’s a comprehensive write-up on updating the VGATE MaxiScan VS890, a popular budget-friendly OBD2 scan tool. Keeping its firmware current ensures accurate vehicle coverage, new features, and bug fixes.

Step 3: Connect the Scanner to the PC

Power On: Some users prefer to power the scanner on before connecting; others leave it off. If the scanner has batteries, ensure they are fresh, or plug the scanner into a car’s OBDII port (with the ignition on) for power during the update process (if the USB does not power the device).
Connect via USB: Connect the VS890 to your computer using the supplied USB cable.
Driver Installation: Wait for the computer to recognize the device. If you see a notification saying "Device Driver Software Installed Successfully," you are good to go. If it fails, try a different USB port.

Step 2: Download the Update Tool

There are two ways to obtain the update software:

Option A (Official Website): Visit the official Autel website (www.auteltech.com). Hover over "Support" and click "Downloads." Search for "MaxiScan VS890" or look for the general "Autel Update Tool."
Option B (Included SD Card): If the scanner came with an SD card and a USB reader, the software may already be stored on the card.

Download the Setup.exe file and run the installation. Follow the on-screen prompts to install the Autel Update Tool on your PC. how to update vgate maxiscan vs890

Part 9: Alternative Method – Updating via SD Card (Older VS890 Models)

Some early batch VS890 units support SD card updates if you lack a Windows PC.

Procedure:

Format a microSD card (FAT32 format).
Download the firmware .bin file from Vgate.
Rename the file to VS890.BIN (case sensitive).
Copy it to the root of the SD card.
Insert the SD card into the VS890 (slot usually under the battery).
Turn on the device. It will automatically detect the file and ask: "Update firmware? Yes/No."
Select Yes and wait.

Note: This method is being phased out. Most modern VS890 units require the PC method.

Troubleshooting (Critical for Feature Quality)

| Problem | Likely Fix | |--------|-------------| | PC doesn’t detect VS890 | Install CH340 driver manually. Try different USB port/cable. | | Updater tool shows “No response from device” | Hold the power button on VS890 for 5 sec while plugging USB. | | Update stuck at 0% | Restart tool, set baud rate to 9600, then reflash. | | Device won’t power on after update | Re-run update. If still dead – contact Vgate support (rare). | Here’s a comprehensive write-up on updating the VGATE

Part 10: Pro Tips & Best Practices

To keep your Vgate Maxiscan VS890 healthy after the update, follow these tips:

Don't update unnecessarily. If the tool works fine with your current cars, skip the update. New firmware can sometimes introduce new bugs.
Back up your data. Before updating, use the "Export Data" feature on the VS890 to save diagnostic logs and vehicle profiles to an SD card.
Charge fully before every update. A dying battery is the #1 cause of bricked scanners.
Use a desktop PC or laptop with stable power. Do not use a battery-powered laptop that might go to sleep mid-update.
Register your product. If you bought a genuine Vgate, register the serial number on their website. Some firmware updates are locked to registered users only.

Part 7: Troubleshooting Common Update Errors

Even when following the instructions, issues can arise. Here is how to fix them. Step 3: Connect the Scanner to the PC

Step 7: Test the New Firmware

Turn your car ignition to "ON" (Engine off is fine).
Navigate to System Settings > Version Info on the vS890.
Verify the new firmware number matches the one you installed.
Scan a vehicle that previously gave you errors.

Feature Title

Keep Your VS890 Compatible: The Complete Firmware Update Walkthrough