The Fujitsu iRMC S4 (integrated Remote Management Controller) is a dedicated micro-controller that provides out-of-band management for PRIMERGY servers. While it offers extensive monitoring and basic power management for free, advanced features like Advanced Video Redirection (AVR)—which provides a graphical KVM console—and Virtual Media require the installation of an "Advanced Pack" license key. Core Requirements for Installation
Before attempting to install a license, ensure you have the following:
A Valid License Key: This is typically a 26-character alphanumeric code (e.g., XXXX-XXXX-XXXX-XXXX-XXXX-XX).
System Serial Number: Licenses are "node-locked" to the specific hardware serial number of your server.
Web Interface Access: A network connection to the iRMC's management LAN port and administrative credentials. Step-by-Step Installation via Web Interface
The standard method for applying a license is through the iRMC S4 Web Interface. Fujitsu iRMC S4 License | «WatchMySys» Blog
To install a license key for the Fujitsu iRMC S4 (integrated Remote Management Controller), you must use the controller's web interface to unlock advanced features like Advanced Video Redirection (AVR) and Virtual Media. Prerequisites fujitsu irmc s4 license key install
Obtain a Key: You must have a valid 29-character alphanumeric license key (e.g., XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX).
Generate Key (if needed): If you only have an activation code, you must register it on the Fujitsu PRIMERGY License Portal along with your server's serial number to receive the final license key.
Browser Compatibility: Due to the age of iRMC S4, modern browsers may block the connection because of outdated TLS/SSL protocols. Use an older browser version or specific settings like "ignore certificate errors" if you cannot access the interface. Installation Steps
Access the Web Interface: Open a browser and enter the IP address of your iRMC S4 (e.g., https://192.168.1.100).
Log In: Enter your credentials (default is usually admin / admin). Navigate to License Management: In the left-hand menu, go to iRMC S4 (or Configuration). Select License Key or Advanced Features. Enter the Key: Find the input field labeled License Key. Type or paste your 29-character key exactly as provided.
Apply and Verify: Click Install or Apply. Once accepted, the status should change to "Permanent license key installed". Common Use Cases & Troubleshooting Fujitsu iRMC S4 License | «WatchMySys» Blog iRMC S4 runs on a dedicated management controller
How to Install Your Fujitsu iRMC S4 License Key integrated Remote Management Controller (iRMC) S4
provides essential out-of-band management for Fujitsu PRIMERGY servers. While standard features like power control and sensor monitoring are free, advanced capabilities—including Advanced Video Redirection (AVR) Remote Media
—require a node-locked license key tied to your server's specific serial number. Fujitsu Global Prerequisites iRMC S4 Advanced Pack license key (e.g., ZKAF-Z5EG-PL5G-6GFR-YEG6-CKGM-KQ Access to the server’s iRMC Web Interface via its dedicated LAN port. The server's Serial Number , which must match the one used to generate the key. Step-by-Step Installation Guide 1. Log in to the Web Interface
Open a web browser and navigate to the IP address assigned to your iRMC. Use your administrative credentials (default is often ) to log in. Devolutions Forum
: Older firmware versions may require older browsers or specific settings due to outdated TLS/SSL standards. Server Fault 2. Navigate to License Management
Once logged in, locate the license input section. While the exact menu path can vary slightly by firmware version, it is typically found under: Maintenance License Key Alternative path Configuration WatchMySys 3. Enter and Activate the Key Locate the text field for the License Key Click Apply or Install .
Carefully enter your 29-character alphanumeric key, including the hyphens. If successful, the status should update to "Permanent license key installed" WatchMySys 4. Verify Advanced Features irmc s4 | «WatchMySys» Blog
The most significant "feature" of installing the license key is that it transforms the iRMC S4 from a standard management interface into an enterprise-grade remote administration tool, specifically by unlocking the Advanced Video Engine (AVE).
Fujitsu Integrated Remote Management Controller (iRMC) provides out‑of‑band server management for Fujitsu PRIMERGY and PRIMEQUEST platforms. The iRMC S4 firmware supports advanced features via license keys that enable functions such as virtual media, enhanced remote console, and advanced power management. Proper license installation ensures compliance and access to full management capabilities.
Fujitsu iRMC S4 (Integrated Remote Management Controller) is the fourth generation of Fujitsu’s embedded server management solution, comparable to Dell iDRAC or HP iLO. Advanced features—such as remote console (KVM), virtual media, and power monitoring—require a valid license key.
This guide covers installation of a license key via:
rmccliBefore you begin, ensure you have:
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX), typically delivered via email or a certificate from Fujitsu.192.168.1.100 or set via BIOS).admin / admin – change this immediately after setup).You will see a box titled "iRMC S4 Advanced License" showing "Not Licensed" or "License missing."
license.xml file.showlicense.If you need the actual license key purchase or evaluation request, contact Fujitsu sales or a reseller – keys are not generically available for free.