The default login credentials for the Fujitsu Integrated Remote Management Controller (iRMC) are as follows: How to Reset the Password
If the default credentials do not work, you can reset the iRMC admin password without rebooting the server by using IPMI tools Linux/ESXi: utility. Ensure the IPMI drivers ( ipmi_msghandler ipmi_devintf
) are loaded in the kernel before running commands to set a new password. Fujitsu IPMIVIEW
tool. You can execute commands through the Command Prompt to restore access to the Key iRMC Information Default Port: The controller typically uses port for operations. Capabilities: The iRMC (such as the
) allows for agentless out-of-band monitoring, video capturing for troubleshooting, and virtual media redirection. Red Hat Documentation specific IPMI command syntax for your operating system to perform the reset?
How to reset iRMC admin password on Fujitsu PRIMERGY servers
The default credentials for a Fujitsu iRMC (integrated Remote Management Controller) depend on the hardware generation of your
server. Older generations typically use a generic global password, while newer generations (S6 and later) utilize unique, device-specific passwords for enhanced security. Default Credentials by Generation iRMC S2, S3, S4, and S5 (all lowercase) (all lowercase) iRMC S6 (and newer) (all lowercase) Unique to each server.
Fujitsu no longer uses "admin" as a global default for these generations Where to Find the Unique iRMC S6 Password
If you have a newer server with an iRMC S6 controller, you can find the individual default password in two physical locations: System ID Card: A pull-out tag usually located at the front of the server
. The password is the complete line of text printed below the barcode (e.g., Admin-4CkNxNZqWoOK Top Cover Label:
For smaller servers that lack a System ID Card, a label with the default password is attached directly to the top cover of the chassis Important Security & Troubleshooting Tips Case Sensitivity: All iRMC passwords are case-sensitive Ambiguous Characters:
On printed labels, capital "I" (India) and lowercase "l" (lima) can look identical. If typing manually fails, Fujitsu recommends using a smartphone barcode scanner
on the System ID Card to capture the exact string without errors Forced Change:
Most newer iRMC versions will force you to change this default password immediately after your first successful login Resetting Credentials:
If the default password has been changed and lost, you may need to use the ServerView Installation Manager (SVIM)
via the host operating system to reset the iRMC to factory defaults Are you trying to a lost password, or are you setting up a server for the first time? Downloads - Fujitsu Support
The default login credentials for the Fujitsu Integrated Remote Management Controller (iRMC) are: Username: admin Password: admin Important Security Review
Using default credentials poses a significant security risk to your server infrastructure.
Change Immediately: You should change the default password during the initial setup to prevent unauthorized remote access to the server's hardware.
Resetting Credentials: If the password has been changed and forgotten, you can reset it without a reboot using an IPMI tool (like ipmitool on Linux/ESXi) or Fujitsu's IPMIVIEW utility for Windows.
Remote Management: The iRMC typically operates over Port 443 (HTTPS) by default for web interface operations.
How to reset iRMC admin password on Fujitsu PRIMERGY servers
For Fujitsu integrated Remote Management Controllers (iRMC), the default credentials depend on the generation of your server. Older systems often use a generic login, while newer models (specifically ) use unique, per-device passwords for security. Default Credentials by Version Standard (S2, ): Username: admin (case-sensitive) Password: admin (case-sensitive) Modern ( and newer): Username: admin
Password: Unique for each server. This individual password is found on the System ID card attached to the server chassis.
Note: The font on the ID card can be ambiguous (e.g., lowercase "l" vs. uppercase "I"); Fujitsu recommends using a smartphone barcode scanner on the card's label to avoid typos. How to Reset or Change a Forgotten Password fujitsu irmc default password
If the default admin/admin or the unique password from the ID card does not work, you can reset the password through the host operating system using the IPMI tool, which does not require a server reboot.
Access via Linux/ESXi:Use the ipmitool to force a new password for the admin user (index 2 is typically the default admin slot):ipmitool user set password 2 'NewPassword123!'
Access via Windows:Use Fujitsu’s IPMIVIEW utility to execute similar IPMI commands from the command prompt.
Access via BIOS/UEFI:Restart the server and enter the BIOS/UEFI Setup (usually by pressing F2 or F12). Navigate to the Server Mgmt or IPMI section where you can manually configure iRMC users and set new passwords. Password Policy Requirements ( )
Newer versions enforce strict password policies. A new password must typically meet these criteria: At least 12 characters.
Must include at least three of the following: lowercase letters, uppercase letters, digits, and special characters.
The default password for Fujitsu iRMC (integrated Remote Management Controller) depends on the generation of the server you are using. Traditional Default Credentials
For older generations (iRMC S2, S3, S4, and early S5), the standard factory default credentials are: New Password Policy (iRMC S6 and Modern Servers) Starting with
(and some late S5 models like the PRIMERGY M5 series), Fujitsu implemented a unique password policy to enhance security. Fujitsu Global Individual Passwords
: Each server now has a unique, case-sensitive default password generated specifically for that unit. Where to find it System ID Card
: Look for a pull-out tab or card (System ID Card) on the front or rear of the server. The password is the complete line of text printed below the barcode. Top Cover Label
: If there is no ID card, the unique password may be on a label attached to the top cover of the server. : These unique passwords often follow a pattern like Admin-XXXXXXXXXXXX Admin-4CkNxNZqWoOK
). Note that the "Admin-" prefix is part of the password itself. Fujitsu Global Useful Troubleshooting Links Fsas Technologies iRMC S6 FAQ
: Official guide on identifying unique default passwords and common character confusion (e.g., lowercase "l" vs. uppercase "I"). How to reset iRMC admin password
: A guide for using IPMI tools to reset the password from within the operating system if you are locked out. iRMC S6 Configuration and Maintenance Manual
The default login credentials for the Fujitsu Integrated Remote Management Controller (iRMC) on PRIMERGY servers are: Username: admin Password: admin Important Security & Setup Details
Case Sensitivity: Both the username and password are case-sensitive and must be entered in lowercase.
Initial Setup: You should change these credentials immediately after your first login to secure the server management interface.
Access Port: The iRMC typically uses Port 443 (HTTPS) for web-based management operations by default. Troubleshooting Access
If the default admin/admin credentials do not work, the password has likely been changed. You can reset it without rebooting the server by using an IPMI tool (like ipmitool on Linux/ESXi or Fujitsu’s IPMIVIEW for Windows) to set a new password for the admin user.
How to reset iRMC admin password on Fujitsu PRIMERGY servers
The server room was humming, a steady mechanical drone that usually felt like progress. But for
, it felt like a wall. He had just inherited a rack of Fujitsu PRIMERGY servers, and his first task was to configure the Integrated Remote Management Controller (iRMC). He opened his browser, typed in the IP, and stared at the login screen.
"Standard procedure," Elias muttered. He tried the classic combinations that every sysadmin knows by heart. Admin/password? No. Administrator/blank? Nothing.
He pulled up the Fujitsu documentation and found the answer: the default credentials for Fujitsu iRMC are admin for the username and admin for the password. The default login credentials for the Fujitsu Integrated
He typed them in, and the dashboard finally blinked to life. But Elias knew the story didn't end with a successful login. Leaving default credentials active is an invitation for trouble. Before he even checked the sensor logs, he navigated to the user management settings and updated the admin password to something complex and secure.
For those who find themselves locked out because the previous tech changed the "admin/admin" default, Elias knew there was a backup plan. As noted by technical guides on the Fujitsu PRIMERGY, you can use an IPMI tool from within the host operating system to reset the iRMC admin password without needing to reboot the entire server.
With the password secured and the dashboard open, the hum of the server room finally sounded like music again.
Fujitsu Integrated Remote Management Controller (iRMC) provides out-of-band management for PRIMERGY and PRIMEQUEST servers. Access to this interface is secured by credentials that have evolved from static defaults to unique, server-specific identifiers. Default Credentials by Generation
The default username for nearly all Fujitsu iRMC generations is admin. However, the password varies significantly depending on the age of the hardware:
Legacy Systems (iRMC S2, S3, S4): Older systems often shipped with the static default password admin.
Modern Systems (iRMC S5, S6): Current servers use unique passwords to comply with modern security standards. Locating Unique Default Passwords
For modern servers, the unique password can be found in two physical locations:
System ID Card: A pull-out plastic tag on the front of the server containing a barcode and a password typically prefixed with "Admin-" followed by 12 characters (e.g., Admin-4CkNxNZqWoOK).
Chassis Label: On smaller servers where a card is not present, a label is attached to the top cover.
💡 Key Note: The entire string, including the "Admin-" prefix, constitutes the password. It is strictly case-sensitive. Resetting or Changing the Password
If the default password fails or has been forgotten, you can reset it through several methods. Organizations can also refer to the Fujitsu PRIMERGY Security Overview for broader server hardening strategies. Using IPMITool (Local OS Access)
If you have access to the server's operating system (Linux or Windows), use the ipmitool utility to reset the admin password directly. Command: ipmitool user set password 2 .
User ID 2: This is the default ID for the "admin" user on Fujitsu hardware. Using ServerView Installation Manager (SVIM)
If the OS is unreachable, boot from the ServerView Installation Manager ISO. Open an x-term window and execute the same ipmitool command to regain access. Guidance for this and other tools is available through Fujitsu Support Downloads. Password Complexity Requirements
Starting with iRMC S6, new passwords must meet strict criteria: Minimum length of 12 characters.
Must include at least three of the following: lowercase letters, uppercase letters, digits, or special characters. Troubleshooting Common Issues
Character Confusion: Characters like capital "I" and lowercase "l" can look identical. Fujitsu recommends using a smartphone to scan the barcode on the ID card to retrieve the exact string.
"Unknown Error" at Login: On iRMC S6 (firmware 2.06S and lower), entering incorrect credentials may trigger a generic "Unknown Error" instead of a "Login Failed" message.
Manual Recovery: If you are using specialized hardware like the HyperScale appliance, you can find specific recovery steps on the Commvault Community. Peer-led technical discussions on Experts Exchange also provide legacy server support.
The Fujitsu iRMC default password—admin / admin—is a lifeline for initial configuration and recovery. But leaving it unchanged is an invitation to compromise. Every day that default credential remains active on a network-accessible server, you are betting your security posture on the hope that no attacker scans for it.
Your action plan:
The convenience of admin/admin ends the moment the server leaves the box. Take control of your out-of-band management before someone else does.
For official documentation, visit the Fujitsu Support Portal (support.ts.fujitsu.com). This article is for educational purposes. Always follow your organization’s security policies.
The default password for a Fujitsu Integrated Remote Management Controller (iRMC) varies by hardware generation, with newer models shifting from generic credentials to unique, server-specific passwords for enhanced security. Quick Reference: Default Credentials iRMC Generation Default Username Default Password iRMC S2, S3, S4, S5 admin admin iRMC S6 admin Unique per server (found on System ID card) Understanding iRMC S6 Security Changes Conclusion: Default is for Setup, Not for Life
Starting with the iRMC S6 generation, Fujitsu implemented a "secure by default" policy. Instead of the traditional admin/admin combination, each server is assigned a unique password at the factory.
Location: The unique password is printed on the physical System ID card attached to your server chassis.
Font Ambiguity: Be aware that certain characters (like capital 'I' and lowercase 'l') may look similar. Fujitsu recommends using a barcode scanner or smartphone to scan the label on the System ID card to avoid typing errors.
Factory Resets: If you perform a factory reset via the UEFI BIOS, the credentials will revert to this unique printed password, not a generic one. Password Requirements for iRMC S6
If you choose to change the password on an S6 system, it must meet strict complexity requirements: Length: Minimum of 12 characters. Complexity: Must meet at least 3 of the following: At least one lowercase letter (a-z). At least one uppercase letter (A-Z). At least one digit (0-9). At least one special character. How to Reset a Lost iRMC Password
If you have lost access to the iRMC and the default credentials do not work, you can reset the password through several methods: 1. Using IPMItool (No Reboot Required)
If you have access to the host operating system (Linux or Windows) and the IPMI drivers are loaded, you can reset the password without taking the server offline. Linux Command: ipmitool user set password 2 'YourNewPassword' Use code with caution. Note: User ID 2 is almost always the default admin account.
Windows: Use the Fujitsu IPMIView tool to execute similar commands. 2. Using UEFI BIOS (Reboot Required) Reboot the server and enter the BIOS Setup Utility. Navigate to the Server Management or iRMC section. Look for an option titled "Load iRMC Default Values".
Setting this to "Yes" and saving will revert the iRMC to its factory state (Warning: This wipes all custom iRMC configurations). 3. Physical Jumper (Emergency Access)
On some motherboards (such as the TX1330 series), there is a physical password clear jumper. Consult the Fujitsu Upgrade and Maintenance Manual for your specific model to locate the pins (usually found near the SATA ports).
Finding the default credentials for a Fujitsu integrated Remote Management Controller (iRMC) depends heavily on the version of the controller you are using. While older systems used a generic "one-size-fits-all" password, modern Fujitsu PRIMERGY servers have moved toward individualized security. 🛡️ Default Credentials by iRMC Version Default Username Default Password iRMC S2, S3, S4, S5 admin admin iRMC S6 admin Individualized (printed on System ID Card) Key Security Changes in iRMC S6
Starting with iRMC S6, Fujitsu implemented a stricter security policy:
Individual Passwords: Each server is shipped with a unique password based on the serial number.
System ID Card: You can find this password on the physical tag attached to the server. If the font is hard to read (e.g., confusing "I" and "l"), Fujitsu recommends scanning the barcode with a smartphone.
Complexity Requirements: If you change the password, it must be at least 12 characters long and include three of the following: lowercase, uppercase, digits, or special characters. 🛠️ How to Reset a Lost iRMC Password
If the default admin/admin doesn't work and you don't have the System ID card, you can reset the password without a full server reboot using ipmitool on the host operating system. Method 1: Using Linux/ESXi (No Reboot Required)
If you have SSH or terminal access to the host OS, you can force a new password onto the iRMC admin account (typically User ID 2).
Install IPMI tools: Ensure ipmitool is installed on your distribution.
Run the reset command:ipmitool user set password 2 'NewSecretPassword123!'
Verify: Log in via the web interface immediately with your new credentials. Method 2: BIOS Reset (Requires Reboot)
This is the "nuclear option" if you cannot access the host OS: Reboot the server and enter the BIOS/UEFI setup utility. Navigate to the Server Mgmt or iRMC tab. Select "Load iRMC Default Values".
Warning: This will wipe all iRMC configurations except for basic LAN settings.
Save and exit; the password will revert to admin (or the unique ID on the S6 tag). ⚠️ Pro-Tip: The "Ambiguous Font" Issue
Fujitsu support warns that the printed passwords on the System ID Cards often use a font where capital "I" and lowercase "l" look identical. If your password attempt fails, try swapping these characters or use a Barcode Scanner to get the exact string. Downloads - Fsas Technologies Support pages EUROPE
To check if a Fujitsu iRMC still uses default credentials without logging in interactively:
# IPMI v2.0 RAKP HMAC-SHA1 test
ipmitool -H <server-ip> -U admin -P admin raw 0x06 0x01
# If returns "Authentication success" -> default password active.
Log monitoring: iRMC syslog events show "Login failed" for invalid attempts but also "Login success from IP X.X.X.X" – monitor for unexpected admin logins.
Leaving the iRMC on the default password is a significant security vulnerability. Once you gain initial access, immediately implement the following: