Firstchip Mptools Chipyc2019 ((full)) Site
FirstChip MPTools (ChipYC 2019) is a specialized mass production (MP) software suite designed for repairing, formatting, and managing USB flash drives powered by FirstChip controllers (such as the FC1178, FC1179, and LC1167).
Released around 2019, this tool is the "go-to" utility for technicians and enthusiasts dealing with "fake" capacity drives or corrupted firmware that standard Windows formatting tools cannot fix. Key Capabilities
Low-Level Formatting: Resets the controller and clears bad blocks that standard OS tools miss.
Capacity Restoration: Detects the true physical capacity of the flash chip, which is essential for repairing "fake" USB drives that report more storage than they actually have.
Firmware Reflashing: Reinstalls the controller's microcode to fix "Write Protected" errors or "Device Not Recognized" issues. firstchip mptools chipyc2019
Partition Management: Allows for creating hidden, read-only (CD-ROM style), or encrypted partitions.
Chip Identification: Provides deep technical data including the Flash ID (FID), NAND type (SLC/MLC/TLC), and manufacturer (Samsung, Hynix, Micron, etc.). Common Use Cases
Repairing "Dead" Drives: When a drive shows "No Media" or "Please Insert Disk," MPTools can often re-initialize the connection between the controller and the NAND memory.
Fixing "Write Protect" Errors: If a drive becomes read-only due to software corruption, this tool can perform a "Factory Reset" to unlock it. FirstChip MPTools (ChipYC 2019) is a specialized mass
OEM Customization: Used by manufacturers to set the Vendor ID (VID), Product ID (PID), and internal serial numbers. Technical Requirements
Compatibility: This specific 2019 version is optimized for FirstChip controllers. It will not work on Phison, Alcor, or SMI controllers.
OS Support: Primarily designed for Windows 7 and Windows 10. It often requires "Administrative Privileges" and disabling antivirus software, as low-level hardware access is frequently flagged as suspicious.
Configuration: The tool uses .ini files for settings. For most repairs, the "Default" or "Auto" scanning mode is recommended to avoid permanently "bricking" the hardware. Safety Warning MP Tools software – from Firstchip (usually a
FirstChip MPTools is a destructive utility. Running a "Start" or "Refresh" operation will permanently erase all data on the connected USB drive. It should only be used as a last resort for hardware recovery.
1. What you need
- MP Tools software – from Firstchip (usually a Windows GUI + CLI tool for mass production)
- Programmer hardware – Firstchip’s ICP or SWD programmer (e.g., CST-LINK or FT-DAP style)
- ChipYC2019 device – target board with SWD (2-wire) or UART boot pins accessible
- Firmware file –
.hexor.bin
2. What is "Chipyc2019"?
In the context of FirstChip MPTools, users often search for "chipyc2019" or similar terms. This usually refers to a specific configuration file (.ini or .cfg) or a patched version of the software database released around 2019.
Deployment Recommendations
- Start with a pilot batch (100–500 units) to finalize adapters, thresholds, and scripts.
- Automate serial-number capture and centralized log storage for traceability.
- Keep spare units and replacement cables; schedule periodic calibration checks.
- If using non-Firstchip MCUs, allocate engineering time to adapt or validate firmware tools.
- Request updated technical documentation and firmware from vendor before full deployment.
5.5 Starting the Process
- Select the drive’s check box in the main window.
- Click Start.
- Progress:
Preformat → Download Flash ID → Scan Bad Blocks → Write Firmware → Verify → Pass. - Wait until Green PASS appears (can take 10–30 minutes for large scans).
Known working versions:
- FirstChip MPTool v1.0.0.32 (good for FC1178)
- FirstChip MPTool v1.0.0.48 (FC1179 support)
- FirstChip MPTool v1.0.0.52 (best for Win10/11, ChipYC2019 auto-detect)
- FirstChip APTool v1.0.0.8 (firmware update mode)
Do not use CBM209X MPTools (ChipsBank) – they will fail to recognize the device or brick it.