Firmware Reset Samsung Ml 2160 2165 2160w 2165w _verified_ -

⚠️ Important: A firmware reset will clear network settings (WiFi/Wired), admin passwords, and may revert the printer to an older firmware state if you use the downgrade method. It will not reset the page counter (toner usage).

2) Soft / Factory Reset (restore default settings)

Purpose: Return network and configuration settings to factory defaults without touching firmware.

ML-2160 / ML-2165 (non-W):

  1. Turn the printer OFF.
  2. Press and hold the Power button. While holding Power, press and hold the Cancel (Stop) button for 5 seconds, then release Cancel while continuing to hold Power for another 5 seconds, then release Power. (If model lacks Cancel, try holding Power for 10–15 seconds.)
  3. Wait ~30 seconds and power ON. Printer should reset settings. If unsure, print a Configuration Page: hold Power + Cancel for a few seconds then release and press WPS? (non-W models may only print via driver—print a Windows test page).

ML-2160W / ML-2165W (Wi‑Fi models) — method to reset network only:

  1. Turn printer ON.
  2. Press and hold the WPS/Wi‑Fi button (or hold the Cancel button for 5–10s depending on control layout) until the Wi‑Fi LED blinks rapidly—this clears Wi‑Fi settings to factory defaults.
  3. To fully restore other settings, use the Embedded Web Server (EWS) reset (see next).

Alternative via Embedded Web Server (EWS) — for W models: firmware reset samsung ml 2160 2165 2160w 2165w

  1. Find the printer IP (print Network Configuration or check router DHCP table).
  2. In a browser, open http:// .
  3. Log in (default may be no password or “admin” with blank password).
  4. Look for Maintenance / System / Restore Defaults and choose Restore/Factory Reset. Confirm.

Note: Exact button combos vary slightly across firmware minor revisions. If the above fails, attempt holding Power + Cancel or Power + WPS variations for 5–15s.

Method 4: Using Samsung Easy Printer Manager (For Windows)

If the printer is responsive via USB or Wi-Fi: ⚠️ Important : A firmware reset will clear

  1. Install Samsung Easy Printer Manager (or Samsung Print Service).
  2. Go to Advanced Settings → Printer Settings.
  3. Click Factory Reset or Restore Defaults.
  4. Confirm and wait for printer reboot.

Note: Some firmware versions hide this option. If missing, use Method 1.

Step 4: Run the Firmware Utility

  1. Right-click the firmware .exe file and select Run as Administrator.
  2. The Samsung Firmware Download Utility window will open.
  3. It will automatically detect your printer (shown as "Samsung ML-2160 Series").
  4. Click "Update Firmware" (or "Start").

Troubleshooting

Method 2: Soft Reset (NVRAM Reset)

If you are experiencing network glitches or minor errors, try this method before attempting a firmware flash. This resets network settings and clears the memory buffer. 2) Soft / Factory Reset (restore default settings)

  1. Turn the printer ON.
  2. Wait until it is in the "Ready" state.
  3. Press and hold the Cancel/Stop button for approximately 5–10 seconds.
  4. Release the button. The printer will reset.