Firmware Reset Samsung M2020w Free Patched May 2026

A "firmware reset" for the Samsung Xpress SL-M2020W typically refers to one of two things: a standard factory reset to clear settings or a "Fix Firmware" (chipless reset) designed to bypass toner chip restrictions. 1. Standard Factory & Network Reset (Free)

This method clears your custom settings, such as Wi-Fi credentials or printer configurations. It is completely free and uses the physical buttons on the device. Hard Reset Procedure: Ensure the printer is powered On.

Press and hold the Stop/Cancel button for approximately 10–15 seconds. Release the button once the LEDs begin to flash. Restart the printer to complete the process.

Wi-Fi Reset: To clear only network credentials, hold the WPS button for about 5 seconds until the LED blinks. 2. "Fix Firmware" (Chipless Reset)

This is a permanent modification to the printer's internal software. It allows the printer to function without the digital chips found on Samsung MLT-D111 toner cartridges , essentially making the printer believe the toner is always at 100%.

Warning: This process often involves third-party software and can void your manufacturer's warranty. How it Works:

Identify Details: You must first print a "Configuration Report" and "Supplies Information" page to find your printer's Serial Number, Firmware Version, and CRUM number. To do this, hold the WPS button until the LED blinks, then release.

Download "Fix" File: Specialized firmware files are typically generated based on your specific CRUM/Serial number. While some older "free" versions might exist on forums, most reliable versions from sites like eReset or INKCHIP often require a small fee (around $13–$16) to generate a unique file for your device.

Installation: You connect the printer via USB and drag the customized .hd firmware file onto a provided usblist2.exe tool to flash the printer.

Final Step: Once flashed, you must physically cover the gold contacts on the toner chip with tape. 3. Official Firmware Updates

Important Note: Samsung’s printer division was sold to HP in 2017. The M2020W is now supported under HP’s legacy Samsung website. This guide is completely free and requires no special software.

Signs You Need a Firmware Reset on the SL-M2020W

Ask yourself: Is your printer suffering from any of these issues?

| Symptom | Explanation | |---------|-------------| | Stuck status light | Solid green or orange light that doesn’t change even after power cycling | | Wi-Fi won’t connect | The printer sees networks but fails to authenticate after a router change | | “Jam” error when no jam exists | A sensor flag is stuck due to a logical error, not paper | | Toner not recognized | New, genuine Samsung toner is showing “empty” or “not compatible” | | Printing stops mid-job | Corrupt data in the printer’s RAM causes a freeze | | Mobile printing fails | Samsung Mobile Print or AirPrint stops discovering the device | firmware reset samsung m2020w free

If you checked three or more boxes, a firmware reset is your next step.

Blog Post: How to Factory Reset a Samsung Xpress M2020W (Free & Easy)

Posted by TechFix Admin | 5 min read

Is your Samsung Xpress M2020W acting up? Maybe it’s refusing to connect to Wi-Fi, throwing a mysterious "Jam" error when there is no paper, or asking for a password you never set.

Before you throw it out the window (or pay a repair shop $100), try a hard firmware reset. The good news? It’s completely free, and it takes less than 60 seconds.

Warning: This will erase your saved Wi-Fi passwords, network settings, and admin passwords. Your printer will behave exactly like it did the day you unboxed it.

Did it work? Here is how to check.

After the reset, the Wi-Fi light should be blinking (looking for a new connection). Your printer's admin password is now blank again.

Pro tip: Download the "Samsung Mobile Print" app or "Samsung Print Service Plugin" to set up the Wi-Fi again. The old "Samsung Easy Printer Manager" software is also free, though no longer updated by HP.

What If the Printer Is Frozen or Won’t Turn On Properly?

Try a cold reset (sometimes called a hard reset):

  1. Unplug the power cord from the printer and wall outlet.
  2. Wait 60 seconds (press and hold the power button for 10 seconds while unplugged to drain residual charge).
  3. Plug it back in and turn it on.

This doesn’t reset firmware, but it clears temporary glitches that might look like firmware issues.

Q4: Does this work on the Samsung M2020 (non-W) version?

A: Yes. The non-W (wired USB only) model uses the same button sequence. However, the non-W model does not have Wi-Fi, so you will only see network settings reset.

Final Warning: Firmware vs. Settings

We just reset the settings (NVRAM). This does not downgrade your firmware version. If you have a corrupt firmware file (the operating system of the printer), this button reset won't fix it. But for 99% of M2020W "I forgot my password" or "Wi-Fi won't connect" problems? This works like magic.

Have a different error? Drop a comment below with the code showing on your screen. A "firmware reset" for the Samsung Xpress SL-M2020W

Disclaimer: This is a user-supported guide. Always refer to your manual. Resetting your device will delete saved networks.

Liked this post? Pin it to your printer board so you can find it next time your M2020W acts up.

Factory and network settings for the Samsung Xpress M2020W can be reset by holding the Stop/Cancel or WPS buttons to resolve printer errors, while official firmware updates are available via the HP Support Portal. Third-party "fix firmware" to bypass toner chips is generally not free and can void warranties or damage the device. Official updates and troubleshooting guides are available through the HP Support Portal. User Guide - HP Inc.

If your Samsung Xpress M2020W laser printer is displaying persistent error lights, refusing to connect to Wi-Fi, or showing "Incompatible Toner" messages after a refill, a firmware reset is often the best solution. While many online services charge for "fix" files, you can perform a standard factory reset and firmware update for free using official tools.

This guide covers the safest methods to reset your Samsung M2020W and restore it to factory settings. How to Reset Samsung M2020W Firmware for Free

Before attempting a firmware-level change, always start with a hard reset to clear the printer's temporary memory. Method 1: The Hard Reset (Button Sequence)

This is the quickest way to clear minor logic errors without changing the firmware version. Turn off the printer using the Power button. Unplug the power cord from the wall outlet. Wait at least 30 to 60 seconds.

While the printer is unplugged, press and hold the Power button for 15 seconds to discharge remaining energy. Plug the printer back in and turn it on. Method 2: NVRAM Initialization (Factory Reset)

If the printer is still acting up, you can perform an NVRAM init. This wipes all custom settings, including Wi-Fi credentials and administrative passwords. Ensure the printer is in Ready mode (green light).

Press and hold the WPS (or Print Screen) button for about 10-15 seconds. Watch the LED indicator; it should start blinking rapidly.

Release the button. The printer will print a configuration report and restart with factory default settings. Method 3: Updating Firmware via HP Support

Samsung’s printer division was acquired by HP. To get the latest stable firmware for free, do not use third-party "reset" sites which may contain malware. Unplug the power cord from the printer and wall outlet

Go to the official HP Customer Support – Software and Driver Downloads page. Type "M2020W" into the search bar. Expand the Firmware section. Download the Samsung Firmware Update Utility.

Connect your printer via USB (firmware updates are more stable over USB than Wi-Fi).

Run the utility and follow the on-screen prompts to "flash" the firmware. Method 4: Using the SyncThru Web Service

If your printer is connected to a network, you can manage the firmware through its internal web interface.

Find your printer’s IP address (printed on the configuration report). Type the IP address into any web browser. Log in (Default ID: admin / Password: admin). Navigate to the Maintenance tab. Look for Firmware Upgrade or Reset Factory Defaults. A Note on "Toner Reset" Firmware

Many users search for "firmware reset" to bypass the toner chip (allowing the use of cheap refills). Be cautious:

• Official Firmware: Updates from HP usually strengthen chip security, which might block third-party toners.• "Fix" Files: Files labeled as "M2020W Firmware Fix Free" on forums are often specific to one printer's CRUM (serial) number. Using a file meant for another machine can "brick" your printer, making it permanently unusable. Troubleshooting Common Issues

• Orange Light Stays On: This usually indicates the toner chip has reached its end-of-life. If a reset doesn't work, you may need a new chip or a new cartridge.• Printer Not Found: Ensure you are using a high-quality USB cable. Firmware utilities often fail over cheap or damaged cables.• Firmware Update Failed: If the power is interrupted during an update, the printer may enter an "Emergency Mode." You will need to re-run the HP Firmware Utility via USB immediately.

By following these official methods, you can resolve most software glitches on your Samsung M2020W without spending money on unverified third-party software.

Firmware Reset vs. Soft Reset vs. Hard Reset: Know the Difference

When searching online, you might see other terms. Here’s what they mean for the Samsung M2020W:

| Reset Type | Method | What it erases | Free? | |------------|--------|----------------|-------| | Soft Reset | Power off, wait 60 sec, power on | Temporary memory (print queue) | Yes | | Hard Reset (our method) | Cancel + Start button sequence | Network, settings, errors, firmware flags | Yes | | NVRAM Reset | Requires service cable + software | Serial number, region, page counters | No (needs tools) |

For 99% of home users, the Hard Reset (button method) is sufficient. Do not attempt an NVRAM reset—it can brick your printer.

Problem: The LED never blinks rapidly.