F6flpy-x64 -intel-r- Vmd-.zip Hp May 2026

To resolve the "no drives found" error during a Windows installation on your HP laptop, you typically need to manually load the Intel Rapid Storage Technology (RST)

driver from a USB flash drive. This specific driver—often labeled as F6flpy-x64-VMD.zip

—allows the Windows installer to communicate with the Intel Volume Management Device (VMD) controller. Intel Community Step 1: Download and Prepare the Driver

Since standard zip files are no longer directly provided on the main Intel site, you must extract them from the executable ( ) or find them on the HP Support site Find your HP Driver HP Support

and enter your laptop's serial number or model. Look under the category for the "Intel Rapid Storage Technology Driver." Extract the Files If you download an , right-click it and use a utility like Extract to "folder name" If you have the SetupRST.exe

from Intel, you can extract it via Terminal/PowerShell using the command: ./SetupRST.exe -extractdrivers SetupRST_extracted Copy to USB : Move the extracted folder (specifically the

files) to the same USB drive you are using for the Windows installation. Intel Community Step 2: Load the Driver During Installation Boot from your Windows installation USB.

When you reach the "Where do you want to install Windows?" screen and no drives appear, click Load Driver at the bottom left. F6flpy-x64 -intel-R- Vmd-.zip Hp

and navigate to the folder on your USB drive containing the extracted driver files. Select the Intel RST VMD Controller from the list and click . Your storage drive should now appear in the list. Intel Community Alternative: Disable VMD in BIOS

If you do not want to use RAID or Optane features, you can often bypass this requirement by changing a setting in your laptop's BIOS: Enter BIOS (usually by pressing repeatedly during startup). VMD Controller and set it to Alternatively, change the from RAID to Learn more

F6flpy-x64 (Intel® VMD).zip contains the Intel Rapid Storage Technology (IRST)

drivers required for Windows to recognize storage drives during a clean installation on modern HP laptops

(typically 11th Gen Intel processors or newer). Without these drivers, the Windows installer often shows a blank list where you would normally select a hard drive for installation. HP Support Community How to Use the Driver to Find Your Missing Drive

If you are currently stuck at the "Where do you want to install Windows?" screen and it's empty, follow these steps: Download and Extract

On a working computer, download the IRST driver. While Intel has recently replaced the direct downloads with an To resolve the "no drives found" error during

installer on some pages, you can still find the necessary files on the HP Support site by entering your specific laptop model. : You must extract the contents of the

file. The Windows installer cannot read drivers directly from a zipped folder. Transfer to USB : Copy the extracted folder containing the files onto your Windows installation USB drive. Load Driver During Setup Return to the HP laptop you are installing Windows on. At the empty drive selection screen, click Load driver and navigate to the folder you copied onto the USB drive. Select the driver that appears (often labeled as Intel RST VMD Controller ) and click Install Windows

: Once the driver is loaded, your internal SSD should appear in the list, and you can proceed with the installation. HP Support Community Alternative: BIOS Workaround

If you cannot find the correct drivers, you can sometimes bypass this requirement by changing a setting in the BIOS: Restart the laptop and press ) to enter BIOS Setup. Look for a setting called VMD Controller Intel RST Premium with Intel Optane and disable it, or switch the storage mode to

Note: Using AHCI may slightly impact the performance features of certain high-speed NVMe drives compared to VMD mode. HP Support Community For further assistance, check the HP Support Community where this is a frequent topic for the HP Spectre HP Support Community Are you having trouble locating the specific download for your exact HP model, or are you getting an error message when trying to load the driver? Windows 11 Installation - HP Support Community - 8281838

What is This File?

F6flpy-x64 denotes the architecture (64-bitFloppy). This is a "F6" driver method.

Part 1: Decoding the Keyword – What is F6flpy-x64 Intel VMD?

To understand the file, let’s break down its name: What is This File

• F6flpy-x64 – This is a legacy naming convention dating back to the Windows XP/7 era when users pressed F6 during setup to load third-party SCSI or RAID drivers. "Floppy" (flpy) refers to the floppy disk media once required. Today, it is simply a ZIP archive containing 64-bit storage drivers.
• Intel R VMD – Intel Volume Management Device is a hardware feature built into modern Intel chipsets (11th Gen and newer, plus some 10th Gen). VMD manages NVMe SSDs directly from the PCIe bus, allowing for hot-plug, surprise removal, and RAID 0/1 on PCIe drives without additional controllers.
• .zip HP – This indicates the driver package is packaged for HP systems. While Intel provides generic drivers, HP often releases customized or validated versions for their firmware and motherboard layouts.

In short: This ZIP file contains the critical storage controller driver required for an HP laptop’s BIOS (configured with VMD enabled) to recognize the internal NVMe SSD during Windows installation.

Method 2: Intel’s Official Download (Fallback)

If HP’s website is unavailable, go to: https://www.intel.com/content/www/us/en/download/19512/intel-rapid-storage-technology-driver-installation-software-with-intel-optane-memory.html

Download the SetupRST.exe . Use 7-Zip to extract it. Inside the extracted folders, look for a subfolder named F6 or f6vmdflpy. You will find the iaStorVD.inf and iaStorVD.sys files. While these are generic Intel files, they work on most HP systems.

How to Use It on an HP System

If you are an IT admin deploying images via SCCM or MDT, or a user manually installing Windows:

1. Download: Get the zip from HP's support page (often under "Driver-Chipset") or Intel's Rapid Storage Technology download center.
2. Extract: Do not leave it zipped. Windows Setup cannot browse inside a zip during the "Load Driver" phase. Extract the files to a separate USB thumb drive.
3. The "Load Driver" Step:
   • Boot from Windows Media.
   • Select Language/Time.
   • On the "Where do you want to install Windows?" screen, the list will be empty.
   • Click Load Driver.
   • Browse to the USB drive folder containing the extracted files (usually inside a folder named F6flpy-x64_...).
   • Select Intel Volume Management Device Driver.
   • Click Next.

The Result: The "missing" NVMe drive instantly appears, allowing partitioning and formatting.

Q2: My HP laptop has an AMD processor. Do I need this?

No. Intel VMD is Intel-exclusive. AMD systems use AMD RAID drivers (different naming scheme). You would need F6flpy for AMD if it exists, but typically AMD’s drivers are named rcraid.