Excelvan Barcode Scanner User Manual Extra Quality !!better!! [SAFE]

Excelvan Barcode Scanner — User Manual & Tips for Extra Quality

1. Build & Hardware Quality (3.5/5)

Excelvan positions itself as a budget-friendly brand. The “extra quality” claim likely refers to a reinforced model with:

• ABS housing – feels sturdy but not ruggedized (not industrial drop-rated like Symbol or Zebra).
• Scratch-resistant glass window – decent, but fingerprint smudges appear quickly.
• Trigger and buttons – tactile but slightly mushy after heavy use (reports of button wear after 6–8 months in warehouses).

Verdict: Good for small retail or home use; not for daily heavy industrial scanning.

5. Scanning Modes & Settings

• Single-scan mode: press trigger for each scan.
• Continuous/Presentation mode: scanner continuously scans when placed on stand; useful for retail checkout.
• Symbology enable/disable: enable only the barcode types you need (e.g., UPC-A, EAN-13, Code 128, QR). Disabling unused symbologies reduces misreads.
• Suffix/prefix configuration: add Enter, Tab, or custom prefixes/suffixes for POS/ERP integration.
• Scan timeout and beep volume: adjust for quieter environments or faster throughput.

Scan barcodes from the manual’s configuration section to toggle modes and set parameters. excelvan barcode scanner user manual extra quality

9. Technical Specifications (Typical)

| Parameter | Value | |-----------|-------| | Sensor | CCD or Laser (model dependent) | | Resolution | ≥ 4 mil (1D) / ≥ 6.6 mil (2D) | | Scan rate | 200–300 scans/sec | | Interface | USB‑A, RS232 | | Input voltage | 5V DC ±5% | | Current | < 150 mA (standby), < 300 mA (scanning) | | Cable length | 1.5 m | | IP rating | IP42 (splash resistant) |

5.2 Stand mode (auto‑scan)

Some Excelvan models support auto‑sensing: Excelvan Barcode Scanner — User Manual & Tips

1. Place the scanner in the included stand.
2. It will scan automatically when a barcode is placed in front.

To disable auto‑scan, scan the “Exit Auto‑Sensing Mode” barcode in the full config manual.

1. What's in the Box

• Barcode scanner unit
• USB cable (or charging/data cable)
• Dongle (for wireless models)
• Cradle/stand (some models)
• Quick-start guide
• Warranty card

Part 1: Initial Setup - Beyond the Basics

High-Speed Inventory Mode

1. Enable GS1 Databar (for new coupons & fresh produce)
2. Enable ISBN/ISSN (for books)
3. Set Min Barcode Length: 4 (Stops random laser noise from scanning)
4. Set Max Barcode Length: 32 (Prevents memory overflow)

2.1 Switching Interface Modes (The #1 Fix for Garbage Data)

Your scanner is likely in Keyboard Wedge mode (acts like a keyboard). This works for Notepad and Excel. However, for web apps (Shopify, Square, QuickBooks), USB Serial (Virtual COM) is higher quality because it sends raw data faster without keyboard driver interference. ABS housing – feels sturdy but not ruggedized

To switch to USB Serial (Recommended for POS):

1. Scan the "Enter Setup" barcode below.
2. Scan the "USB Serial" barcode.
3. Scan the "Exit Setup" barcode.
4. Note: You will now need keyboard emulation software (like "Tera Term" or your POS’s built-in serial plugin) to capture data.

To stay in Keyboard Wedge but fix speed: Scan "USB Keyboard" then scan "Inter-Character Delay: 5ms" (this fixes missing characters on slow RPi systems).