Evoko Liso Factory Reset Verified Info

✅ Verified Factory Reset for Evoko Liso

Method 1: From the touchscreen (if device is responsive)

  1. Tap the gear icon (Settings) on the home screen.
  2. If prompted for a PIN, enter the admin PIN (default is 1234 unless changed).
  3. Go to Advanced → Factory Reset.
  4. Confirm the reset when prompted.
  5. The device will reboot and revert to out-of-box state.

Method 2: Hardware reset (if device is unresponsive or boot looping)

Note: This requires opening the device casing and is intended for IT/AV staff.

  1. Disconnect power from the Evoko Liso.
  2. Remove the back cover (four screws).
  3. Locate the small tactile button labeled SW2 on the main PCB near the Ethernet port.
  4. Press and hold SW2 while reconnecting power.
  5. Keep holding until you see the factory reset confirmation on the screen (approx. 10–15 seconds).
  6. Release — device will reset and restart.

Part 2: The "Quick Reset" vs. The "Deep Factory Reset"

Most users do not know that the Evoko Liso actually has two reset methodologies. The "Quick Reset" simply clears the user data but keeps the certificate store. The "Deep Factory Reset" (what we will cover) wipes absolutely everything. evoko liso factory reset verified

Evoko Liso factory reset — verified steps

Step 4: Confirmation

The system will ask, "Confirm wipe all user data?" Scroll to "Yes -- delete all user data" . Long-press to select.

Wait 30 to 90 seconds. You will see scrolling text on the screen indicating that partitions are being formatted (data, cache, and metadata). When finished, you will return to the main recovery menu.

If You Can't Access the Device:

In some cases, you might need to perform a factory reset using a physical method, such as pressing specific buttons on the device. For Evoko Liso, specific key combinations might be required to initiate a reset. ✅ Verified Factory Reset for Evoko Liso Method

General Steps for Factory Reset on Evoko Liso

  1. Backup Important Data: Before you proceed with a factory reset, ensure you've backed up any important data or settings. A factory reset will erase all data on the device. Tap the gear icon (Settings) on the home screen

  2. Access Settings: Typically, a factory reset can be initiated from the device's settings menu. Look for an option like "Settings" or "System" on your Evoko Liso.

  3. Find the Reset Option: Within the settings, search for an option like "Backup & Reset," "System Reset," or simply "Factory Reset." The exact wording may vary.

  4. Confirm the Reset: You will likely be asked to confirm the reset. Ensure you're ready to lose all data on the device.

  5. Perform the Reset: Follow the on-screen instructions to complete the factory reset process.

Option A: Standalone Mode (No management server)

  1. Select language and time zone.
  2. Network: Connect to Wi-Fi or plug in LAN (DHCP is default).
  3. Calendar Integration: Choose Office 365, Exchange, or Google. You will need your service account email and password, or the server address (e.g., outlook.office365.com).
  4. Room Resource: Enter the exact email address of the room resource (e.g., conference-room-a@yourcompany.com).
  5. Test: The unit will sync the next 48 hours of bookings.

Before you start

WPWebsmartz E-Paper CMS