...
Skip to content

Epson Et2400 Reset ((exclusive)) May 2026

How to Reset Your Epson EcoTank ET-2400 Resetting your Epson EcoTank ET-2400

is a common troubleshooting step for fixing unstable Wi-Fi connections, clearing "all lights flashing" errors, or preparing the device for a new network. Since this model lacks a built-in LCD screen, all resets are performed using specific button combinations on the control panel. 1. Resetting Wi-Fi & Network Settings

This is the most common reset used to resolve connection issues or to switch the printer to a new router.

Turn off the printer: Press the Power button and wait for all lights to go out.

Hold Button Combination: Press and hold the Network Status (Wi-Fi) button and the Power button simultaneously.

Wait for Flashing: Keep holding for about 4–5 seconds until the Wi-Fi and Wi-Fi Direct lights begin to flash alternately.

Release: Once the lights flash, let go of both buttons. The lights will eventually stop, indicating the network settings have returned to factory defaults. 2. Performing a "Hard" Power Reset

If your printer is frozen, unresponsive, or all lights are blinking, a power cycle can clear the temporary memory.

Unplug directly: While the printer is on (or stuck), pull the power cord directly from the wall outlet.

Drain residual power: Wait for 2–3 minutes. For a deep reset, press and hold the Power button for 30 seconds while it's still unplugged to discharge any remaining energy.

Plug into the wall: Plug the cord back into a wall outlet directly, avoiding surge protectors or power strips, which can sometimes cause voltage issues.

Power on: Turn the printer back on and wait for the initialization sequence to finish. 3. Resetting for Maintenance (Nozzle Check)

If you are resetting to fix print quality issues, you can trigger a "maintenance reset" to check the print head health. Turn off the printer and ensure paper is loaded.

Hold Power + Stop: Press and hold the Power and Stop (Triangle) buttons for about 10 seconds.

Release: The printer will print a nozzle check pattern. If lines are broken, you may need to run a cleaning cycle by holding the Stop button for 5 seconds while the printer is on. 4. Advanced: Waste Ink Pad Reset epson et2400 reset

If you receive a "Service Required" message stating the ink waste pads are full, a standard button reset will not work.

EPSON ET-2400 RESET: A STEP-BY-STEP GUIDE

Are you experiencing issues with your Epson ET-2400 printer, such as error messages, ink system failures, or printer malfunction? A reset may be just what you need to get your printer up and running again. In this post, we'll walk you through the process of resetting your Epson ET-2400 printer.

Why Reset Your Epson ET-2400 Printer?

Resetting your Epson ET-2400 printer can resolve a range of issues, including:

Before You Reset Your Epson ET-2400 Printer

Before you proceed with the reset process, make sure to:

Method 1: Soft Reset

A soft reset is the simplest way to reset your Epson ET-2400 printer. To perform a soft reset:

  1. Press and hold the Stop button (or Cancel button) and the Paper/Source button simultaneously.
  2. While holding these buttons, plug in the power cord and turn on the printer.
  3. Continue holding the buttons for 10-15 seconds, until the printer's lights start to flash.
  4. Release the buttons and wait for the printer to complete its reset process.

Method 2: Factory Reset

If a soft reset doesn't resolve your issues, you may need to perform a factory reset. This will restore your printer to its default settings and erase any customized settings.

  1. Press and hold the Stop button (or Cancel button) and the Wi-Fi button simultaneously.
  2. While holding these buttons, press and hold the Power button until the printer turns on.
  3. Continue holding the buttons for 10-15 seconds, until the printer's lights start to flash.
  4. Release the buttons and wait for the printer to complete its reset process.

Method 3: Using the Epson Adjustment Program

If the above methods don't work, you may need to use the Epson Adjustment Program (also known as the Epson Resetter). This software tool is designed for advanced users and should be used with caution.

Download the Epson Adjustment Program

Using the Epson Adjustment Program

After the Reset

After resetting your Epson ET-2400 printer:

Conclusion

Resetting your Epson ET-2400 printer can resolve a range of issues and get your printer up and running again. If you're still experiencing problems after trying the methods outlined above, it may be time to contact Epson support or consider visiting a professional repair service.

Disclaimer: The information provided in this post is for educational purposes only. PrinterReset.com is not responsible for any damage or issues that may arise from attempting to reset your Epson ET-2400 printer. Always follow proper safety precautions and consult the user manual before attempting any repair or reset procedures.

The Epson EcoTank ET-2400 is a powerhouse for home offices, but like all inkjet printers, it eventually hits a wall known as the service life limit. If your printer has stopped mid-job with a message stating that "a printer's ink pad is at the end of its service life," you are likely looking for a way to perform an epson et2400 reset.

The Epson ET-2400 Go to product viewer dialog for this item.

"reset" typically refers to two different processes: a Wi-Fi/Network reset (common for connection issues) or a Waste Ink Counter reset (required when the internal pads are full). Because the

lacks a screen, these resets are performed using specific button combinations or external software. 🛠️ How to Reset (Two Methods) 1. Wi-Fi & Network Reset

Use this if you cannot connect the printer to your phone or computer. Turn off the printer.

Hold the Network/i button and the Power button together for ~5 seconds. Wait until the Wi-Fi lights flash and then go out. The printer is now reset and ready for a fresh setup. 2. Waste Ink Counter Reset

If your printer shows a "Service Required" error (blinking ink and paper lights), the internal waste ink pads are full.

The Review: Users generally find this reset frustrating because Epson does not provide a built-in way to clear this counter for "cheap" models like the How to Reset Your Epson EcoTank ET-2400 Go

Solution: You must use third-party software like WIC Reset Utility.

Cost: While the software is free, a "Reset Key" usually costs around $10.

Warning: Resetting the counter without physically cleaning or replacing the ink pads can lead to ink leaking out of the printer over time. 📋 Review Summary How to Reset Your Epson EcoTank ET-2400 Printer

How to Reset Ink Level Sensors

The ET-2400 uses transparent tanks, so it doesn't "count" ink like cartridge printers. If you refill a tank and the printer still shows "low," you need to tell the printer you refilled:

  1. Open the scanner unit.
  2. Press and hold the "Stop" button for 5 seconds.
  3. The printer will run a short cycle and reset the ink levels.

Method 1: The Network Reset (Fixing Wi-Fi Issues)

If your ET-2400 is not connecting to your computer or the Wi-Fi light is blinking erratically, a network reset is the first troubleshooting step. This clears the current Wi-Fi configuration but leaves your ink levels and print settings intact.

Steps:

  1. Turn the printer ON.
  2. Press and hold the Network Status Button (the button with the antenna icon) for at least 5 seconds until the network light begins to flash.
  3. Release the button, then immediately press and hold the Network Status Button again for another 5 seconds.
  4. The network light should begin to flash rapidly, indicating the network settings have been cleared.
  5. You can now reconfigure the printer on your computer via the Epson Smart Panel app or printer setup utility.

2. Waste Ink Counter Reset (Most Common)

The printer has a built-in waste ink pad. Epson sets a counter that stops the printer after ~10,000–15,000 pages. This is a service reset, not available in normal menus.

Part 1: What Does "Epson ET-2400 Reset" Actually Mean?

Before diving into the "how," you need to understand the "why." The term reset in the context of the Epson ET-2400 is ambiguous. It does not mean resetting your printer to factory settings (clearing Wi-Fi passwords or network configurations).

Three Types of Resets for the ET-2400

  1. Network/Factory Reset: Erases Wi-Fi and admin settings.
  2. Ink Level Reset: Refreshes the ink tank sensors after a refill.
  3. Waste Ink Pad Counter Reset (The Critical One): This is what 99% of users search for.

The waste ink pad (also called a maintenance box or absorber pad) is a soft, sponge-like component inside the printer that soaks up excess ink used during print head cleaning or borderless printing. Epson programs a counter into the printer’s firmware. When that counter hits a pre-set maximum (usually around 5,000 to 10,000 pages), the printer physically locks down.

Why does Epson do this? Epson argues that if the ink pad overflows, ink will leak inside your printer, onto your desk, or into the electronics. For legal and safety reasons, they brick the printer until a technician replaces the pad and resets the counter.

However, advanced users have discovered that you can manually reset the counter without replacing the pad (or by replacing it cheaply), saving the printer from the trash heap.

Part 1: The Ink Refill Reset (How to reset the ink levels)

The ET-2400 is an EcoTank, meaning it has no cartridges. However, Epson implemented a "key code" system. When you lift the tank lid, you will see four colored caps (Black, Cyan, Magenta, Yellow). Underneath each cap is a chip reader.

The Problem: If you refill the tank but do not reset the chip, the computer still shows "Low Ink" or "Empty."

The Solution: Using the built-in buttons. Error messages, such as "Ink System Failure" or