Epson Adjustment Program Et-2760 Verified May 2026

The Ultimate Guide to the Epson ET-2760 Adjustment Program: Resetting Your Printer Safely

If you own an Epson EcoTank ET-2760, you likely appreciate its low running costs and high-quality prints. However, like all modern inkjet printers, it has a built-in maintenance counter. Eventually, you may encounter the dreaded "Service Required" message or alternating red lights, indicating that the ink pads are at the end of their service life.

This is where the Epson ET-2760 Adjustment Program comes into play. This article explains what the software is, why you need it, the risks involved, and a step-by-step guide to resetting your printer’s waste ink counter. epson adjustment program et-2760

Step-by-Step Reset Procedure

Q3: I reset the counter, but the printer still shows Service Required. Why?

Two possibilities:

• You did not properly enter Service Mode before running the program.
• The printer has a secondary counter (e.g., paper feed counter) that also needs resetting within the Adjustment Program’s "EEPROM" tab.

Phase 1: Enter Printer Service Mode

1. Turn off the ET-2760.
2. Hold down the "Stop" (circle with triangle) + "Power" buttons simultaneously.
3. Keep holding both until the power light flashes, then release only "Stop."
4. Press the "Stop" button 5 times.
5. Release the "Power" button. The LCD will go blank or show "Service Mode" – you are now ready.

The Essential Guide to the Epson Adjustment Program for the ET-2760: What It Is, How to Use It, and Risks to Know

If you own an Epson EcoTank ET-2760, you’ve likely experienced the frustration of a blinking “Service Required” light, error codes like 0xF1 or 0x9A, or the dreaded message: “A printer’s ink pad is nearing the end of its service life.” For many users, the immediate response is to search for the Epson Adjustment Program ET-2760. The Ultimate Guide to the Epson ET-2760 Adjustment

But what exactly is this program? Is it a legitimate tool? And most importantly, should you use it? Step-by-Step Reset Procedure Q3: I reset the counter,

In this deep-dive article, we will explore everything you need to know about the Epson Adjustment Program for the ET-2760—from its intended purpose to step-by-step usage instructions, legal considerations, and safer alternatives.

Step 2: Run the Adjustment Program

• Extract the downloaded ZIP file (password often: 123 or adjprog).
• Run AdjProg.exe as Administrator.
• Select ET-2760 from the model dropdown.
• Click Particular adjustment mode (not Initial settings).

What it is

• A maintenance/utility tool for Epson printers used to reset waste ink pad counters, perform head alignment, nozzle checks, and other service functions. (Often called “Adjustment Program” or “Service Tool”.)

Q4: Is there a Mac version?

No official version. You must run it via Windows virtual machine (Parallels, VMware, or Boot Camp) or borrow a Windows PC.