Eltek PowerSuite 3.3 is a specialized Windows-based software application designed to program, configure, and monitor Eltek DC Power Supply Systems
(such as Smartpack and Compack controllers) from a personal computer Key Information & System Requirements
PowerSuite 3.3 serves as the interface between your PC and the power system, allowing for advanced operations and maintenance that may not be accessible through the controller's front panel or basic web interfaces. Processor: Minimum 400MHz CPU (800MHz recommended). Minimum 96MB RAM (256MB recommended). At least 310MB of free hard disk space. 1024x768 resolution with 16-bit color. OS Compatibility:
Windows 98, XP, Vista, and Windows 7. Note that newer versions like PowerSuite 3.6 are better suited for Windows 10. Accessing the Software
The software is typically provided to professionals through official Eltek channels or technical support partners. Official Downloads:
You can often find technical software and documentation on the Eltek Support Portal or through regional distributors like ADVICE.CO.IL Technical Documentation:
Detailed guides and history records for version 3.3 are available on
, which outline installation steps and compatibility with various controller firmware. Installation Steps Run the Installer:
Use the setup wizard to install the application and necessary Eltek USB drivers Connect Hardware:
Power on the controller and connect it to your PC via a USB cable or Ethernet LAN. Establish Communication: If using Ethernet, you may need the
utility to locate the controller's IP address on your network.
You can find downloads for Eltek PowerSuite 3.3 and newer versions through several service providers and support hubs, as Eltek typically provides software through its partner network rather than a direct public download site. Download Options
Direct Download (v3.3d): You can download PowerSuite 3.3d for Windows XP/7 from Eltek Ukraine's service center.
Alternative Archive: A hosted version of PowerSuite 3.3 is also available on MasterService.
Latest Stable Version (v3.6.2): If your hardware is compatible, you may want to consider PowerSuite 3.6.2 from Advice Electronics, which offers broader support for newer controllers. Key Features of Version 3.3
Released originally in late 2010, this version introduced several critical updates for Eltek DC power systems:
Expanded Compatibility: Added support for Windows 7 (64-bit) and upgraded USB-to-UART drivers to version 6.1.
Hardware Support: First version to support Smartpack2 Master and Smartpack2 Basic controllers, as well as I/O Monitor2 units.
New Logging Capabilities: Introduced specific logs for mains outages, battery discharge cycles, and generator fuel consumption/run hours.
Configuration Tools: Added a "Location" tab for GPS coordinates and improved the Import/Export tool for configuration files. System Requirements OS: Windows XP or Windows 7.
Prerequisites: Requires Microsoft .NET Framework 2.0 for version 3.3 on older systems.
Connectivity: Connects to controllers via USB or Ethernet (using UDP tunneling protocol).
Are you setting up a new Smartpack controller, or are you trying to troubleshoot an existing connection? PowerSuite Software Version 3.3 Overview | PDF - Scribd
Legal and safe ways to obtain Power Suite 3.3
-
Contact Eltek support or your Eltek reseller/distributor and request the specific version needed for your hardware model and firmware. They can provide:
- Official installer
- Required license key or activation instructions (if applicable)
- Release notes and compatibility matrix
-
If you’re an existing Eltek customer, check vendor portals or the support download area (login may be required) for archived versions.
-
Use a later official Power Suite release if compatible — vendors often maintain backward compatibility and will advise which newer version works with your equipment.
-
For emergency recovery where vendor contact isn’t immediately possible, use manufacturer‑approved tools bundled on equipment USB sticks or support media provided with units.
4. Hire an Authorized Technician
For a one-time fee, a certified tech can reconfigure your system using their licensed software copy.
Step 1: Contact Eltek / Delta Technical Support
Open a support ticket on the Delta Eltek website. Explain that you are a technician maintaining legacy infrastructure (specify your controller model, e.g., Smartpack S). Ask if they have an archive of "Power Suite 3.3" available for download. Often, support will provide a secure FTP link.
Step-by-Step Installation Guide (Once You Have the File)
Assuming you have legally obtained the Eltek_Power_Suite_3.3.exe file, here is how to install it on a modern Windows 10/11 machine (note: the software was built for XP/Vista, so compatibility mode is required).
- Disable Driver Signing (Temporary): Restart Windows and press F8. Select "Disable driver signature enforcement." Version 3.3 uses older USB-to-Serial drivers that Windows 10/11 will reject otherwise.
- Run in Compatibility Mode: Right-click the
.exefile, go to Properties > Compatibility. Select "Run this program in compatibility mode for Windows 7." - Run as Administrator: Right-click and select "Run as Administrator" to allow the installer to write registry keys for the COM ports.
- Standard Installation: Accept the license agreement. Choose "Complete" installation to install both the GUI and the USB drivers.
- Connect Your Hardware: Use a USB to RS-232 converter (like a Keyspan or FTDI chipset). Connect to the controller’s RS-232 port. Open Power Suite, scan for systems at 9600 or 19200 baud.
Practical steps to install and use (safe, vendor-recommended approach)
- Obtain official installer and any license information from Eltek or authorized reseller.
- On the target PC, create a restore point and ensure up‑to‑date antivirus is enabled.
- Verify Windows and .NET versions meet the installer’s requirements.
- Run installer as Administrator; allow any vendor drivers/services to be installed.
- Connect to the Eltek equipment via the recommended interface (direct Ethernet, serial/RJ45, or USB adapter).
- Use device discovery in Power Suite to locate units; confirm model and firmware revisions.
- Before changing firmware or critical settings: export and save current configuration and log files.
- Apply changes or firmware upgrades only following the vendor’s firmware compatibility and upgrade order instructions.
- Test alarms and status reporting in a controlled maintenance window.
Step 4: Download and Verify Checksums
Once downloaded, verify the file hash (MD5 or SHA256) if provided. Eltek often posts these to confirm file integrity.
Frequently Asked Questions
The Official Route (Recommended)
Eltek, now a part of Delta Electronics, distributes Power Suite primarily through Value Added Resellers (VARs) and official support contracts. Generally, the software is free to use for configuring systems, but access to the download portal often requires a service contract or a registered partner account.
Why isn't it just "open source"? Because Power Suite contains proprietary communication protocols and firmware update modules. Distributing it freely could lead to bricked units if users update firmware incorrectly.
