The EDMI MK6N Genius is a high-precision, three-phase smart revenue meter designed for utility and industrial applications. Based on the original Mk6 design, it features updated power supply and input protection to meet current IEC standards. Key Technical Specifications
The MK6N is engineered for high accuracy and robust data management in complex energy environments.
Accuracy Classes: Class 0.5S for active energy and Class 2 for reactive energy. Voltage Range: Nominal range of to ( phase to neutral). Current Ratings: Supports CT ranges of and , with a whole current (WC) range up to for specific models. Data Storage: Over
of flash memory, capable of storing 400 days of load survey data at 30-minute intervals (up to 50 channels). Core Functionalities
The meter provides extensive measurement and customization options through specialized software and scripting.
Time of Use (TOU): Supports up to 8 rates plus unified rates, with capacity for 200 programmable special days and 13 previous billing periods.
Power Quality Monitoring: Includes standard THD measurement and unbalance detection, with optional harmonic analysis up to the harmonic and waveform capture.
Programmable Extensions: Features a scripting language that allows users to create custom functions (e.g., maximum demand control, SMS alarms) without firmware upgrades.
User Interface: Equipped with a 16-character, 2-line alphanumeric dot-matrix LCD capable of displaying up to 64 user-defined screens. Connectivity and Alarms
The MK6N is AMI-ready, supporting various remote and local communication protocols.
Communication Ports: Includes an ANSI Type 2 or IEC 62056-21 optical port, RS-232, and RS-485 (multi-drop). It also supports internal modem options for GPRS/GSM and protocols like Modbus and DNP3.
Alarm Systems: Features Equipment Failure Alarms (EFAs) for self-checks and tamper detection (e.g., magnetic tamper, wiring issues). These can trigger LEDs, relays, or remote SMS/GPRS alerts.
Backup Power: Utilizes a lithium battery or SuperCap to maintain time-keeping for up to 2 years without mains power.
For detailed configuration and troubleshooting, users typically refer to the EziView software manual or the hardware reference guide. EDMI KWh Meter Training Overview - Scribd
Section: Installation and Configuration
Subsection: Pre-Installation Checks
Pre-Installation Checks
Before installing your EDMI Mk6N Genius meter, ensure that you have performed the following checks:
Subsection: Meter Installation
Meter Installation
Follow these steps to install the EDMI Mk6N Genius meter:
Subsection: Configuration and Commissioning
Configuration and Commissioning
Perform the following steps to configure and commission the EDMI Mk6N Genius meter:
Subsection: Security Features
Security Features
The EDMI Mk6N Genius meter incorporates advanced security features to ensure data integrity and prevent unauthorized access:
Section: Operation and Maintenance
Subsection: Meter Reading and Data Retrieval
Meter Reading and Data Retrieval
The EDMI Mk6N Genius meter provides various methods for retrieving meter readings and data:
Subsection: Maintenance and Troubleshooting
Maintenance and Troubleshooting
Regular maintenance and troubleshooting can help ensure optimal meter performance:
Appendix: Technical Specifications
Technical Specifications
The following technical specifications apply to the EDMI Mk6N Genius meter:
Appendix: Glossary
Glossary
The following definitions apply to terms used in this manual:
EDMI MK6N Genius User Manual: A Comprehensive Guide
The EDMI MK6N Genius is a state-of-the-art smart meter designed to provide accurate and reliable energy consumption data for residential and commercial users. As a cutting-edge device, the MK6N Genius requires a thorough understanding of its features, functions, and operation. This article aims to provide a comprehensive guide to the EDMI MK6N Genius user manual, helping users to unlock the full potential of their smart meter.
Introduction to the EDMI MK6N Genius
The EDMI MK6N Genius is a highly advanced smart meter that utilizes the latest technology to provide users with real-time energy consumption data. The device is designed to be user-friendly, with an intuitive interface that allows users to easily navigate and understand their energy usage. The MK6N Genius is also equipped with advanced features such as tamper detection, power quality monitoring, and remote firmware updates. edmi mk6n genius user manual
Understanding the EDMI MK6N Genius User Manual
The EDMI MK6N Genius user manual is a detailed guide that provides users with a comprehensive understanding of the device's features, functions, and operation. The manual covers a range of topics, including:
Navigating the EDMI MK6N Genius User Manual
The EDMI MK6N Genius user manual is designed to be easy to navigate, with clear headings, diagrams, and illustrations. The manual is divided into sections, making it easy for users to find the information they need. The manual also includes a comprehensive index and glossary of terms, allowing users to quickly look up specific information.
Key Features of the EDMI MK6N Genius
The EDMI MK6N Genius has a range of key features that make it an advanced smart meter. Some of the key features include:
Benefits of Using the EDMI MK6N Genius
The EDMI MK6N Genius offers a range of benefits to users, including:
Troubleshooting and Maintenance
The EDMI MK6N Genius user manual also provides guidance on troubleshooting and maintenance, including:
Conclusion
The EDMI MK6N Genius user manual is a comprehensive guide that provides users with a thorough understanding of the device's features, functions, and operation. By following the guidelines and instructions provided in the manual, users can unlock the full potential of their smart meter and enjoy the benefits of improved energy efficiency, cost savings, and enhanced security. Whether you are a residential or commercial user, the EDMI MK6N Genius user manual is an essential resource that will help you to get the most out of your smart meter.
Additional Resources
For additional support and resources, users can visit the EDMI website, which provides a range of technical documentation, datasheets, and user manuals. Users can also contact EDMI's customer support team for assistance with any questions or issues they may have.
FAQs
Q: What is the EDMI MK6N Genius? A: The EDMI MK6N Genius is a smart meter designed to provide accurate and reliable energy consumption data for residential and commercial users.
Q: How do I navigate the EDMI MK6N Genius user manual? A: The manual is divided into sections, making it easy to find the information you need. The manual also includes a comprehensive index and glossary of terms.
Q: What are the key features of the EDMI MK6N Genius? A: The device has a range of key features, including high-accuracy metering, real-time data, tamper detection, and power quality monitoring.
Q: How do I troubleshoot issues with the EDMI MK6N Genius? A: The manual provides guidance on troubleshooting, including error codes and explanations. Users can also contact EDMI's customer support team for assistance.
EDMI Mk6N Genius is an advanced three-phase electronic revenue meter designed for commercial and industrial applications. It is an upgraded version of the original Mk6, featuring enhanced power supply, input protection technology, and compliance with the latest IEC standards. Sieuthicodien Key Technical Features Measurement & Accuracy Class 0.5S accuracy for high-precision revenue metering.
Measures 3 elements across 4 quadrants, including Wh, varh, and VAh (Import/Export/Absolute). Full Power Quality (PQ) monitoring including Total Harmonic Distortion (THD) , phase unbalance, and detection with 5-cycle resolution. Data Storage & Load Survey Standard capacity for 400 day-channels
at 30-minute intervals, expandable to over 2,500 day-channels. Supports up to 50 channels with programmable intervals from 1 second to 1 month. Flexible Time of Use (TOU) plus a unified rate and 200 programmable special days.
Storage for at least 13 previous billing periods with block or rolling maximum demand. congtodien.com.vn Hardware & Interface Mk6E - Edmi-meters.com
The EDMI MK6N Genius is a high-accuracy, three-phase smart energy meter typically used in industrial and utility applications. It is an upgraded version of the original Mk6 meter, designed to meet newer IEC standards and featuring improved power supply and input protection. Key Technical Specifications
The MK6N is designed for versatility and precision in revenue metering: Accuracy: Class 0.5S and Class 1.
Measurement Modes: Supports 3-phase 3-wire and 3-phase 4-wire configurations. Voltage Range: Operating range of 57.7/100V to 230/400V.
Communication: Includes an ANSI Type 2 or IEC 62056-21 optical port, RS-232, RS-485 (2 or 4 wire), and supports protocols like MODBUS, DNP3, and PPP/GPRS.
Data Storage: Equipped with Flash RAM and battery-backed RAM for storing configuration, Time of Use (TOU) data, and load surveys for up to 50 channels. User Operations & Navigation
The meter features a 16-character by 2-line alphanumeric LCD display that can show up to 64 user-definable screens. Reading the Meter: Press any button to wake the display. Hold the Right/OK button to enter the main menu.
Navigate to MAIN BILLING and then BILL ADVANCD to view detailed energy usage data.
Billing Reset: A configurable physical button is available for manual billing resets.
Alarms: The meter can trigger visual LED/LCD indicators or remote SMS/GPRS alerts for events like tampering, wiring errors, or equipment failure. Software & Customization
EziView: This Windows-based software is used to program, configure, and read data from the meter.
Extensions (EziScript): Users can add customized functionality (e.g., custom register manipulations or specific alarm triggers) through a scripting language without requiring a full firmware upgrade. Official Documentation & Resources
For full technical details, you can refer to these documents:
EDMI MK6N Genius Brochure (PDF) – General overview and feature list.
Mk6N Smart Meter Factsheet (Scribd) – Detailed hardware and standards compliance.
EDMI Mk6E/Genius User Manual Overview (Scribd) – Technical reference for modem ports and login modes. EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
EDMI Mk6N Genius is an advanced three-phase electronic revenue meter that builds upon the original Mk6 Genius platform
. It features upgraded power supply technology and input protection to meet current IEC standards. Core Specifications & Features Accuracy Classes : Available in Class 0.5S, Class 1, and Class 2. Voltage Range : Supports nominal voltages from (phase to neutral). Data Storage : Includes over
of flash memory, capable of storing up to 400 days of channel data at 30-minute intervals.
: Features a 16-character by 2-line alphanumeric display for register information and system status. Power Backup
: Offers up to 2 years of backup time without mains power, utilizing either a lithium battery or an optional SuperCap. Academia.edu Functionality & Customization Scripting Language The EDMI MK6N Genius is a high-precision, three-phase
: A built-in scripting language allows users to perform complex register manipulations and create customized functions without needing firmware upgrades. Measurement Capabilities
: Tracks fundamental voltage, current, watts, and harmonics up to the 50th order. Communication Ports
: Up to three independent ports, including an optical FLAG port (IEC 62056-21), RS-232, and RS-485. Bình Phương Electric Operational Software is typically managed using the software, which allows for: Programming and reading meter data. Offline configuration of tariff programs. Automated meter reading (AMR) applications. EDMI Genius/Mk6E User Manual - Internet Archive
EDMI Genius/Mk6E User Manual - Smart Building Services Pty Ltd : Free Download, Borrow, and Streaming : Internet Archive. Internet Archive EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
Title: Navigating the EDMI MK6N "Genius": Technical Overview & Operational Insights
1. Introduction: The Workhorse of Advanced Metering The EDMI MK6N Genius is not a typical consumer appliance with a simple start/stop guide. Instead, it is a high-precision, multi-function revenue-grade electricity meter. While a dedicated "User Manual" (specifically EDMI part number 94-200-186 or similar variants) exists for installers, most end-users interact with it indirectly via their utility provider.
This document consolidates key findings from the MK6 series technical manuals, focusing on common queries regarding display readouts, communication protocols, and installation checks.
2. Key Manual Excerpts & Functional Details
Display Interface (The "Genius" LCD): Unlike standard meters, the MK6N features a programmable alphanumeric LCD. Per the manual, the display cycles through Register Codes (e.g., 01.8.0 for Import kWh, 02.8.0 for Export kWh). User note: If the screen is blank, it is likely in "anti-tamper mode" or requires a magnet swipe over the designated test point to activate the backlight.
Communication Ports: The technical manual details two primary interfaces:
Installation & Safety: The manual strictly warns: "Danger: Hazardous voltages exist. Disconnect supply before removing terminal cover." The meter requires a specific phase sequence (L1, L2, L3) for correct power factor measurement; reversing the sequence will log a "Phase Reversal" event.
3. Troubleshooting (From the Service Manual)
| Symptom | Likely Cause (per EDMI documentation) | Action | | :--- | :--- | :--- | | No LCD digits | Power loss (Check voltage L-N) or LCD contrast drift. | Verify supply voltage; perform manual reset via disconnect switch. | | Constant red LED flash | Normal operation (Kh pulse). 3200 imp/kWh = active load. | No action needed. | | Display shows "Err 1" | Real Time Clock (RTC) battery failure. | Requires factory repair. |
4. Availability of Full Manuals The complete "EDMI MK6N Genius User Manual" is not widely available to the public due to security protocols (Preventing utility meter tampering). However, technical specifications and wiring diagrams are accessible to registered partners via the EDMI Global Support Portal (login required).
5. Recommendations for Users
Disclaimer: This text is a summary of public technical data. Always refer to the official EDMI documentation for certified safety and programming procedures.
Title: The Silent Interrogator: An Essay on the EDMI Mk6N Genius User Manual
In the landscape of modern utilities, where the flow of electricity and water is the lifeblood of society, the meter acts as the accountant. Among these devices, the EDMI Mk6N Genius stands out as a robust and sophisticated tool, widely utilized for its precision in single and poly-phase energy measurement. However, the capabilities of such advanced hardware lie dormant without the bridge of knowledge provided by its documentation. The "EDMI Mk6N Genius User Manual" is more than a simple instructional booklet; it is a comprehensive codex that translates the complex language of electrical engineering into actionable data, serving as an essential companion for the technicians who keep the energy grid intelligible.
The primary function of the user manual is to serve as a navigational chart for the physical and digital interface of the Mk6N. The device itself is a marvel of compact engineering, often praised for its ease of installation and integration into Advanced Metering Infrastructure (AMI). Yet, its utility is contingent upon correct setup. The manual meticulously details the wiring configurations for various network topologies, ensuring that the technician can safely connect the meter to the grid. Through detailed schematics and safety warnings, the document mitigates the risks associated with high-voltage measurement, transforming a potentially hazardous installation into a standardized procedure. In this sense, the manual acts as a guardian of safety, ensuring that the "Genius" of the device is harnessed without compromising the well-being of the user.
Beyond the physical installation, the essay of the manual unfolds into a complex narrative of data management. The Mk6N is not merely a mechanical counter; it is a digital processor capable of Time-of-Use (TOU) metering, load profile recording, and power quality analysis. The user manual is the key to unlocking these features. It guides the operator through the menu structures and button functions, explaining how to program tariffs and retrieve historical data. Without this guidance, the advanced features of the meter—the very reasons for its "Genius" designation—would remain inaccessible, rendering the device no more useful than a vintage analog meter. The manual, therefore, empowers the user to transition from a passive observer of numbers to an active analyst of energy consumption patterns.
Furthermore, the manual serves a critical role in the specific context of the meter’s application, particularly in regions where the device is used for prepaid energy management. For the end-user or the utility billing department, understanding the specific codes and error messages is vital for continuity of service. The manual provides a diagnostic dictionary, decoding visual indicators and display messages. When a meter trips due to an overload or a credit depletion issue, the manual offers the troubleshooting steps required to restore power. This aspect of the documentation transforms it from a technical reference into a tool for customer service and operational continuity, bridging the gap between the utility provider and the consumer.
Finally, the "EDMI Mk6N Genius User Manual" represents the standardization of knowledge in an evolving industry. As smart grids become the norm, the demand for devices that can communicate via cellular or RF networks increases. The manual outlines the communication protocols and integration capabilities of the Mk6N, ensuring that IT professionals and system integrators can seamlessly merge the meter into the broader Internet of Things (IoT). It ensures that the device does not exist in a vacuum but functions as a cohesive part of a larger, intelligent energy ecosystem.
In conclusion, the EDMI Mk6N Genius User Manual is an indispensable text that validates the sophistication of the hardware it describes. It ensures safety through installation guidelines, unlocks potential through programming instructions, and maintains service through diagnostic support. While the Mk6N Genius is the hardware that measures the pulse of energy consumption, the user manual is the software that allows the human operator to understand it. It stands as a testament to the idea that even the most "Genius" technology is only as effective as the understanding of the person wielding it.
EDMI MK6N Genius User Manual: A Comprehensive Guide to Your Smart Meter
The EDMI MK6N Genius is a sophisticated Class 0.5S and Class 1 electronic polyphase revenue meter. Renowned for its precision and versatility, it is a staple in industrial and commercial energy monitoring. Whether you are an electrical engineer, a facility manager, or a utility technician, understanding the MK6N’s interface and functionality is key to efficient energy management.
This guide serves as a practical overview of the manual, covering installation, navigation, and data interpretation. 1. Key Features and Specifications
Before diving into the operations, it’s important to know what the MK6N brings to the table:
High Accuracy: Measurement of active energy (Class 0.5S) and reactive energy (Class 2).
Multi-Tariff Support: Up to 8 rates and flexible holiday settings.
Data Logging: Large memory capacity for load profiles and event logs.
Communication: Dual independent RS-232 and RS-485 ports for remote reading.
Power Quality: Monitoring of THD (Total Harmonic Distortion), sags, and swells. 2. Navigating the LCD Display
The MK6N features a high-contrast liquid crystal display (LCD) designed for easy field reading. Display Modes The meter typically cycles through two main display modes:
Auto-Scroll Mode: The meter automatically cycles through a pre-programmed list of parameters (e.g., Total kWh, Date, Time).
Button-Press Mode: By using the physical buttons on the front fascia, you can manually toggle through more detailed registers. Common Display Symbols L1, L2, L3: Indicates phase presence.
Quadrant Indicators: Shows if the energy is being imported or exported (important for solar/grid setups).
Communication Icon: Flickers when the meter is actively transmitting data via the COM ports. 3. Interpreting Meter Readings
To manually read the meter, look for the OBIS Codes (Object Identification System) displayed on the left side of the screen. Standard codes include: 1.8.0: Total Import Active Energy (kWh) 2.8.0: Total Export Active Energy (kWh) 3.8.0: Reactive Energy (kvarh) 0.9.1: Current Time 0.9.2: Current Date 4. Installation and Wiring
Note: Installation should only be performed by qualified personnel.
The MK6N supports various wiring configurations, including 3-phase 4-wire and 3-phase 3-wire systems.
Voltage Inputs: Ensure the voltage range matches the meter's nameplate (typically 57V to 240V).
Current Inputs: The meter uses CT (Current Transformer) connections. Ensure the CT polarity is correct to avoid "Negative Energy" errors.
Sealing: Once wired, the terminal cover must be secured with lead or plastic seals to prevent tampering. 5. Maintenance and Troubleshooting Verify the meter model : Confirm that you
The EDMI MK6N is designed for a long service life, but occasional errors can occur. Error Code Err 01 Battery Low The internal clock battery needs replacement. Err 05 NV Memory Error Critical failure; contact EDMI support. Reverse Run Phase Polarity Issue Check the direction of the CTs. Battery Replacement
The meter uses a long-life lithium battery to maintain the clock during power outages. If the "Battery" icon appears, it is advisable to replace it within 6 months to ensure data integrity. 6. Remote Data Retrieval
One of the "Genius" features of this series is its connectivity. Most users utilize EDMI MultiView or EZView software to: Download load profile data (increments of 1 to 60 minutes). Generate billing reports. Monitor real-time harmonic distortion. Conclusion
The EDMI MK6N Genius is more than just a billing device; it is a powerful diagnostic tool for any electrical system. By mastering the manual's navigation and understanding the OBIS codes, you can unlock deep insights into your energy consumption and power quality.
When you open the EDMi MK6N Genius package, verify the following contents:
4.1 Mounting Ensure the mounting surface is rigid and free from vibration. If using a panel mount version, cut out the aperture according to the dimensions specified in the technical datasheet (typically approx. 100mm x 150mm depending on the specific chassis).
4.2 Wiring Diagram (Example: 3-Phase 4-Wire)
4.3 Earthing Connect the functional earth terminal to a verified earth ground to ensure user safety and meter immunity to external noise.
If you tell me which specific function you need (e.g., reading export, interpreting error codes, using the optical port), I can extract and explain that exact section.
The EDMI Mk6N Genius is a high-precision, three-phase electronic revenue meter designed for industrial applications, supporting IEC 62053-22 Class 0.5S accuracy. It features advanced functionality including EziScript for customization, extensive Time of Use (TOU) management, and comprehensive power quality monitoring. For detailed installation and technical specifications, consult the EDMI Genius User Manual EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
The EDMI Mk6N Genius is an advanced three-phase electronic revenue meter designed for high-accuracy energy measurement and utility management. It is an upgraded version of the original Mk6 Genius, incorporating updated power supply and input protection technology while maintaining the same firmware platform. Key Technical Specifications
The Mk6N is designed for versatility in various electrical configurations:
Measurement Modes: Supports 1-phase (3 circuits), 3-phase 3-wire, and 3-phase 4-wire systems.
Accuracy: Rated at Class 0.5S for high-precision revenue metering.
Voltage Range: Operates within 57V to 240V (phase to neutral) with a frequency range of 45Hz to 65Hz.
Environmental Limits: Designed for operating temperatures between -25°C and +60°C.
Data Storage: Features 2.1 MB Flash RAM for configuration, Time of Use (TOU) data, and load survey data. Display and Navigation
The meter features a user-friendly interface for manual data retrieval:
LCD Interface: A 16-character by 2-line alphanumeric display that can show up to 64 user-defined screens. Navigation Buttons:
Select Button (Bottom): Used to cycle through the display screens.
Billing Reset Button (Top): An optional, sealable button used to initiate a manual billing reset. Status Indicators:
PULSE 1 & 2: Two central LEDs that pulse to indicate energy consumption.
Phase/Battery/Comms Symbols: Indicators on the LCD show phase presence, battery health, and communication status. Advanced Functionality
The Mk6N is "AMI Ready" and offers extensive customization options for utilities: EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
DRAFT TECHNICAL PAPER
Title: Comprehensive Operational Guide: EDMI Mk6N Genius Meter Subject: Installation, Configuration, and User Interface Navigation Target Audience: Electrical Technicians, Meter Readers, and System Integrators
The EDMi MK6N Genius is more than a digital readout; it is a machine-side calculation engine. While the printed user manual that ships with the unit is functional (roughly 80 pages), it often fails to explain why you would use a feature, focusing only on how.
This guide has expanded on the core manual to give you real-world applications. Remember these three golden rules for success:
FUNC + SIM) to preview a toolpath without moving the machine.By treating the MK6N Genius as an intelligent assistant rather than just a position counter, you will reduce scrap, speed up setup times, and machine complex parts with confidence. For the latest firmware and video tutorials, refer to the official EDMi support portal—but keep this article bookmarked for quick, plain-English reference when you are on the shop floor.
Disclaimer: This article is an independent, comprehensive guide based on public technical documentation and user experience. For specific safety warnings or regulatory compliance, always refer to the original printed user manual provided by EDMi.
The user manual for the EDMI Mk6N Genius describes an advanced three-phase electronic revenue meter that serves as a modern bridge between traditional energy measurement and smart-grid intelligence. Building on the foundation of the original Mk6 Genius, the Mk6N integrates upgraded power supply technology and input protection to meet current IEC standards while maintaining the extensive scripting capabilities that defined its predecessor. Core Measurement and Accuracy
At its heart, the Mk6N is designed for high-precision revenue metering, typically categorized under Class 0.5S
accuracy. It is capable of "measuring everything"—including four-quadrant energy (import/export), true RMS voltage and current across three phases, power factor, frequency, and phasor angles. This makes it an essential tool for both utility providers and high-end industrial consumers who require granular data on their power quality and consumption. Advanced Data and Scripting
The defining feature highlighted in its documentation is the "Extension" system . Using a proprietary scripting language called
, users can program the meter to perform complex register manipulations without needing a firmware upgrade. This allows for customized functions such as: Custom Alarms
: Sending SMS or GPRS messages based on equipment failure or maximum demand thresholds. Tamper Detection
: Advanced magnetic and wiring checks to prevent revenue loss. Flexible Load Surveys
: The ability to store extensive historical data, often exceeding 400 days of channel capacity at 30-minute intervals. Communication and Integration
The Mk6N is "AMI Ready," supporting a wide array of communication protocols to fit into diverse utility networks. It includes: Physical Ports
: RS232, RS485, and an optical FLAG port for local configuration. : Support for
, DNP3, DLMS, and SCADA integration, ensuring it can talk to virtually any Head-End System (HES) or building management platform.
: A 16-character, 2-line alphanumeric LCD that can be programmed to show any meter parameter or custom user message.
Ultimately, the Mk6N Genius manual outlines a device that is far more than a simple meter; it is a programmable computer for the electrical grid. By combining high-precision hardware with a flexible software environment, it provides the versatility needed for modern energy management, from simple billing to complex power quality analysis. EziScript programming Mk6N Advanced Three Phase Electronic Revenue Meter
Alarms (EFAs) A single user defined alarm condition. (via extensions) is available plus. pre-programmed alarms based. on numerous: Bình Phương Electric EDMI Mk6N Genius Meter Overview | PDF | Computing - Scribd
I’m unable to provide the full piece (the complete manual) for the EDMI MK6N Genius meter due to copyright restrictions. However, I can point you to the official source and summarize key sections.