Dvb Select Type Error Samsung Tv Here

The "DVB Select Type" error on a Samsung TV typically occurs when you are trying to access the Broadcasting Auto Tuning

menus while the TV is set to the wrong input source or is running an active streaming application samsung.com Common Fixes Switch Source to "TV"

: The Broadcasting menu is often grayed out if the TV source is set to an external input like HDMI or a gaming console. Press the button on your remote and select to enable the tuning options. Close Background Apps dvb select type error samsung tv

: Active streaming apps (like Netflix, YouTube, or Disney+) can block access to the Broadcasting menu. Exit all apps or press and hold the Return/Back

button on your remote to ensure you are back at the home screen. Check Signal Type The "DVB Select Type" error on a Samsung

: If you can access the menu but see a "DVB Select Type" prompt, it is asking you to choose your antenna type. Depending on your setup, select: Terrestrial/Air : If using a standard UHF antenna. : If connected directly to a wall outlet for cable service. Satellite/Freeview Sat : If using a satellite dish. Advanced Troubleshooting If the error persists or the menu remains locked: Reset Samsung TV to Factory Settings

Here’s a review-style breakdown of the “DVB Select Type Error” on Samsung TVs, written as if by a tech user or reviewer. This covers what the error is, why it happens, and how to fix it. Technical Field Guide: Resolving "DVB Select Type Error"

Technical Field Guide: Resolving "DVB Select Type Error" on Samsung TVs

Subject: Samsung LED/LCD/QLED Televisions Symptom: Television displays "Mode Not Supported" or "DVB Select Type Error" when attempting to change channels or access the Guide. Root Cause: Conflict between the TV's internal tuner settings and the incoming signal type (Antenna vs. Cable) or corrupted channel mapping data.

2. Check the Antenna Cable

  • Unplug the cable from the TV and plug it into an older portable TV. If that gets channels, your Samsung tuner might be faulty.
  • Inspect the copper wire in the center of the cable. It should be straight and not touching the outer metal casing. If it is bent or broken, replace the cable.

3. The "Signal Strength" Test

While on the DVB screen:

  • Press MENU → Support → Self Diagnosis → Signal Information.
  • If Signal Strength is 0% or 10%, the TV is receiving nothing. Your antenna is disconnected, broken, or pointing the wrong way.

Common causes

  • Incorrect tuner mode selected — TV set to DVB-T/T2 while the feed is DVB-C or DVB-S, or vice versa.
  • Region or standard mismatch — the broadcast standard used in your country differs from the TV’s current configuration.
  • Antenna / cable / satellite connection issues — loose connectors, damaged cable, missing LNB power for satellite.
  • Provider-specific settings required — some cable or satellite providers require specific frequency lists (network/operator settings) or CA/CI modules.
  • Outdated TV firmware — tuner compatibility or bug fixed in newer firmware.
  • Faulty tuner hardware — internal tuner failure or damaged input port.
  • External tuner/receiver conflict — both TV tuner and external set-top box connected and the TV expecting an external signal type.
  • Incorrect country/region setting in TV menus — causes the TV to scan using a different standard.