Dsdplus 271 ^new^ Download Fix Direct

DSDPlus v2.71 is often considered a "holy grail" version for digital radio hobbyists because it was one of the last stable releases before the software transitioned into its current Fast Lane (subscription-based) model. However, because it is legacy software, users frequently encounter errors during installation or startup. If you are trying to get DSDPlus 2.71 running, 1. The "Missing DLL" Error

This is the most frequent hurdle. DSDPlus is a "portable" application, meaning it doesn't use a standard Windows installer. It relies on specific library files to decode audio.

The Symptom: You try to open the .exe and get an error stating lame_enc.dll, libsndfile-1.dll, or libfftw3f-3.dll is missing.

The Fix: You must download the DSDPlus DLL Pack. Most reputable radio hobbyist sites host this as a separate zip file. Extract all these DLLs directly into the same folder where your DSDPlus.exe is located. 2. The "Public Version" vs. "Fast Lane" Confusion

Many users try to "fix" a 2.71 download by overwriting it with newer files they found online.

The Problem: Version 2.71 is a "Public" release. The "Fast Lane" versions (like 2.4xx and higher) require a unique license key linked to your email.

The Fix: Do not mix files from different versions. If you want the features of the modern software (like better P25 Phase II support), you must email the developers to join the Fast Lane program. If you want to stick with 2.71, ensure your folder contains only 2.71 binaries. 3. Audio Routing (The "No Audio" Fix)

DSDPlus does not "listen" to your hardware directly in a simple way; it listens to an audio bridge.

The Symptom: The program opens and the scopes are flat, even though your SDR software is running.

The Fix: You must use a Virtual Audio Cable (VAC) or VB-Audio Cable. Set your SDR software (like SDR#) output to "CABLE Input" and set the DSDPlus input to "CABLE Output." Ensure both are set to the same sample rate (usually 48,000 Hz) in the Windows Sound Control Panel to avoid "stuttering" decodes. 4. Windows Defender/Antivirus Flagging

Because DSDPlus interacts with low-level system audio and isn't digitally signed by a major corporation, Windows often flags it as "unrecognized" or a "Trojan."

The Fix: If your download disappears immediately after extraction, check your antivirus quarantine. You will likely need to add an Exclusion for the specific folder where you keep your DSDPlus files. 5. Command Line Startup

DSDPlus 2.71 is designed to be run via the Command Prompt for full functionality.

The Fix: Instead of double-clicking the icon, create a .bat (batch) file in the folder. Right-click > New > Text Document. Type DSDPlus -i1 -o1 (adjusting numbers for your specific audio devices) and save it as start.bat. Running the software this way allows you to see error logs if the program crashes. To help you get this running correctly, could you tell me: What specific error message are you seeing?

Are you using an SDR (like an RTL-SDR) or a physical radio patched into your PC? Which operating system are you on?

Once I have those details, I can give you the exact command line strings you need.

Preventing Future DSDPlus Errors

Once you have successfully performed the DSDPlus 271 download fix, follow these best practices:

1. Never run DSDPlus as Administrator – It messes with audio permissions. Run as standard user.
2. Keep a dated backup – Every time you update, copy the entire folder to DSDPlus_271_BACKUP.
3. Monitor groups.io – The developer posts hotfixes for specific error codes.
4. Use a dedicated SDR computer – Avoid DSDPlus on a gaming PC with GPU audio drivers (NVIDIA High Definition Audio conflicts).

Frequently Asked Questions (FAQ)

Fix:

1. Go to Windows Security → Virus & threat protection → Protection history
2. Find DSDPlus/FMP24 entries → Restore
3. Add the entire DSDPlus folder as an exclusion:
   • Windows Security → Manage settings → Exclusions → Add folder

Summary table

| Symptom | Likely fix | |---------|-------------| | Corrupt ZIP | Redownload, use 7-Zip | | Missing MSVCR120.dll | Install VC++ 2013 x86 | | Antivirus deleted .exe | Restore + folder exclusion | | No audio decode | Check virtual audio cable routing | | Key invalid | Re-register, check system date | | SDR not found | Run Zadig, use -i flag |

If you still have issues after these steps, reply with the exact error message and what SDR / audio setup you’re using.

DSDPlus 2.71 was a specific "Christmas release" of the Fast Lane branch

. If you are encountering issues downloading or running it, follow these steps to resolve common "fixes" associated with this version: 1. Verification of Version and Source DSDPlus 2.71 is an older version of DSDPlus Fast Lane Official Downloads

: Always download software and base DLL files directly from the official DSDPlus website Check for Updates

: Current versions of Fast Lane automatically check for updates. If 2.71 is broken, it may have been superseded by a more stable release like v2.465 or newer. RadioReference.com Forums 2. Missing DLL Fix

A frequent cause for "failed" installs or crashes in older versions is missing library files. Download Base DLLs : Ensure you have downloaded the DSDPlus DLL package

from the main website and extracted them into your DSDPlus folder. FFTW Library : Many users require libfftw3f-3.dll for advanced decoding. Download it from an authorized mirror like FFTW.org Extract only the libfftw3f-3.dll

file and place it directly into your main DSDPlus directory. John's Tech Blog 3. Installation Best Practices Clean Install

extract new version files over an old installation directory. Create a fresh, empty folder (e.g., C:\DSDPlus ) and extract all contents there. Batch File Check : Verify your startup files (like DSDPlus.bat ) are correctly pointing to your hardware. DSDPlus Full Install or update instructions

DSDPlus 2.71 Download Fix: Troubleshooting Guide & Installation Tips

If you are a radio hobbyist looking for the DSDPlus 2.71 download fix, you likely encountered issues while updating or performing a fresh install of this popular digital decoder. DSDPlus 2.71 was originally released as a notable "Christmas" update, introducing significant changes to how the software handles files and command-line parameters. 1. Common Issues with DSDPlus 2.71

Users often report errors such as missing .dll files or the program "complaining" about missing configuration files upon startup. This is frequently caused by attempting to overwrite an old version of DSDPlus with the 2.71 files.

Missing .groups and .radios Files: Version 2.71 introduced new data protection features that may cause the program to fail if these files are missing or in an old format.

Broken DLL Links: Many older download links for the required support files (DLLs) have gone offline over the years.

Command Line Syntax Changes: Syntax for certain recording functions (like -Pwav) changed in this version, causing old batch files to break. 2. How to "Fix" Your DSDPlus 2.71 Installation

The most reliable "fix" for DSDPlus 2.71 issues is to perform a clean installation rather than an update.

Create a New Directory: Never install the new version over an old copy. Create a fresh, empty folder (e.g., C:\DSDPlus271) to avoid data corruption.

Download the Base Files: Use the Official DSDPlus Website to download the newest public release or base files.

Install Required DLLs: DSDPlus requires specific external libraries. If you get a "DLL not found" error, you must download the correct DLL package (often found in the DSDPlus Misc Menu or official documentation) and place them directly into your main DSDPlus folder.

Create Dummy Config Files: If the program refuses to start, try creating empty text files named DSDPlus.groups and DSDPlus.radios in your directory. dsdplus 271 download fix

Run as Administrator: If the program fails to save logs or updates, check your folder permissions. Ensure the user account has "Full Control" over the DSDPlus folder. 3. Updating to Newer Versions

While 2.71 was a major milestone, much newer versions are now available. The DSDPlus Fast Lane program provides frequent updates and automated fixes through the software's internal menus.

Auto-Update Fix: Open DSDPlus, go to the Misc menu, and select "Automatically check for updates" to ensure you always have the latest bug fixes.

Base File Download: If you are missing critical executables or DLLs, the "Download newest Base Files" option under the Misc tab is the most effective modern fix for installation errors.

For more detailed setup guides and community troubleshooting, the RadioReference Forums remain the most active resource for DSDPlus support.

Are you having trouble with a specific error message (like a missing DLL name), or are you trying to set up trunk tracking for the first time? DSDPlus - DLL Files Download Link Broken?

1 Oct 2024 — * Computer Aided Monitoring and Programming. * Voice/Control Channel Decoding Software. RadioReference.com Forums DSD Plus error when starting - RadioReference.com Forums

To resolve the "download fix" issues associated with DSDPlus 2.10 or higher (including version 2.271), you typically need to manually update the required DLL files and executable components, as the software often triggers antivirus flags or fails to download complete libraries during the initial install.  1. Download the Base Files 

Ensure you have the latest core components from the official source. Most "fixes" involve ensuring the base application and the DLL pack are in the same folder. 

Official Site: Visit DSDPlus.com and download the DSDPlus 1.101 Public Release (base) and the DSDPlus DLL Pack.

Fast Track Versions: If you are using a specific version like 2.271, this is usually part of the "Fast Lane" updates. You must unzip the Fast Lane files directly into your existing DSDPlus folder, overwriting the older .exe files.  2. The DLL Library Fix 

The most common error is a "Missing DLL" message (e.g., lame_enc.dll or libsndfile-1.dll).  Download the DLL Pack from the DSDPlus website.

Extract all files from the DLL zip directly into your main DSDPlus directory.

Note: Do not put them in a subfolder; they must reside in the same folder as DSDPlus.exe.  3. Antivirus and Windows Defender Exceptions 

Because DSDPlus interacts with hardware drivers and lacks a digital signature, Windows often deletes the .exe immediately after download.  Open Windows Security > Virus & threat protection. Select Manage settings and scroll down to Exclusions.

Click Add or remove exclusions and add the entire folder where you installed DSDPlus.

If the file was already deleted, you will need to re-download or "Restore" it from the Protection History.  4. SDR Hardware Fixes  If the software opens but doesn't "hear" anything: 

VB-Cable: Most users need VB-Audio Virtual Cable to route audio from their SDR software (like SDR#) into DSDPlus.

Sampling Rate: Ensure both your Windows Recording devices and your SDR software are set to 16-bit, 48000 Hz (DVD Quality). Anything else often causes the "fix" to fail or the audio to sound robotic.  5. Running as Administrator 

Some versions fail to write log files or frequency data if they don't have permission.  Right-click DSDPlus.exe. Go to Properties > Compatibility. Check Run this program as an administrator. 

Are you receiving a specific error code or a "missing file" message when you try to run the software? 

A "fix" for DSDPlus 2.71 typically refers to resolving missing file errors (like DLLs) or updating to the latest stable release. Since DSDPlus versioning can be confusing between "Public" and "Fast Lane" releases, here is the feature guide to getting it running correctly. 1. Getting the Right Files

The most common issue with version 2.71 is a missing libfftw3f-3.dll file, which is required for spectrum processing in FMPA.

The DLL Fix: You must download libfftw3f-3.dll separately and place it in your main DSDPlus folder.

The Base Files: For a clean install, download the DSDPlus 1.101 and 1.101 DLL archives from the official DSDPlus site first. 2. Proper Installation Steps

To avoid "corrupt" errors or startup failures, follow this sequence:

Create a New Folder: Use a simple path like C:\DSDPlus. Avoid protected Windows folders (like Program Files) to prevent permission issues.

Extract Base Files: Unzip the version 1.101 and the DLL package into this folder.

Apply 2.71 Update: Overwrite those files with the 2.71 (or newer) files.

Add libfftw: Drop the libfftw3f-3.dll into the same directory. 3. Common Technical Fixes "Missing .radios file"

Create a blank text file in the folder and name it DSDPlus.radios. Do the same for DSDPlus.groups. SDR# Connection Issues

DSDPlus 2.71+ is designed to work with its own tuners (FMP24, FMPA, or FMPP). It is recommended to use these instead of routing through SDR#. Benchmarking Loop

On first run, FMPA will benchmark your CPU. Do not close it or run other heavy programs until it finishes and creates FMPA.dat. 4. How to Update to the Latest DSDPlus – Digital Decoder

To resolve the DSDPlus 2.71 (Fast Lane) download and installation issues, ensure you are following the specific update procedures required for this version. The "fix" typically involves a combination of correct base file layering and acquiring missing dynamic-link library (.dll) files. 1. The "Base File" Layering Fix

DSDPlus 2.71 is often distributed as an update rather than a standalone installer. If you are getting errors about missing files (like dsdplus.exe or DLLs), you must "layer" the files correctly:

Install Public Version First: Download the latest public version (usually v1.101) from the Official DSDPlus Website and extract it into a dedicated folder like C:\DSDPlus.

Overwrite with 2.71: Copy the files from your 2.71 Fast Lane update zip into that same folder, allowing it to overwrite the older versions. DSDPlus v2

Extract with WinRAR or 7-Zip: Native Windows zip extractors often fail to prompt for the password required for Fast Lane updates. Use 7-Zip or WinRAR to extract the files using your assigned update password. 2. Missing DLL Fixes

Version 2.71 and other Fast Lane releases frequently require external libraries that are not included in the main zip file.

libfftw3f-3.dll: This is a common missing file for Fast Lane users. You can download the 32-bit DLL package from FFTW.org and place the libfftw3f-3.dll file directly into your DSDPlus folder.

lame_enc.dll: If you receive errors about this file, ensure it is present in your main folder. This file is necessary for MP3 recording and can be sourced from various SDR utility sites. 3. Permission and Folder Fixes

If DSDPlus identifies an update but fails to download or extract it, check your folder permissions:

Write Privileges: DSDPlus downloads updates directly into its executable folder. Ensure the folder is not "Read Only" and that your user account has Full Control in the Security settings.

Avoid Program Files: Do not install DSDPlus in C:\Program Files, as Windows security often blocks the program from writing new files (like updates or frequency logs) to that directory. Use C:\DSDPlus instead. 4. Direct Update Trigger

If you are already running a version of Fast Lane and missed the 2.71 notification: DSDPlus 2.71 Released - Digital Speech Decoder (DSD) Guide

This report outlines the recommended steps to fix issues regarding the DSDPlus 2.71 Fast Lane download, which was released in December 2017. DSDPlus 2.71/Fast Lane Fix Report

Issue: Users may experience issues downloading the update, or encounter "missing DLL" or "wrong checksum" errors upon installation. This often occurs because the Fast Lane service requires all updates to be applied in order, or because necessary base DLL files were not updated along with the executable. Fix Procedures:

Download and Unzip: Use a program like WinRAR to unzip the 2.71 update package.

Password Requirement: Ensure you are using the correct password provided in the original Fast Lane email to unlock the download.

Missing DLL Errors: If receiving checksum or missing DLL errors, download the required base files (e.g., FMP24.exe, DSDPlus.dll) mentioned in the 2.71 release notes and move all of them into your main DSD+ directory.

Update Strategy: If skipping intermediate updates, ensure all subsequent Fast Lane updates (e.g., 2.197, 2.205) are applied in order to avoid breaking changes in newer versions, such as changes to TIII system handling.

Clean Installation: If configurations are corrupted, deleting the DSDPlus.bin file can resolve issues, as it resets customizations. Usage Notes:

DSD+ Fast Lane requires an active internet connection to download updates via the MISC > CHECK FOR UPDATES NOW menu.

Ensure that no significant other applications are running when starting FMPxxx to avoid interference. To help you further with this fix, could you confirm:

Are you getting a specific error message (e.g., "checksum failure" or "missing .dll")? Are you using RTL-SDR or SDRPlay hardware?

If you are using SDRPlay, I can specifically help with updating the msvcr90.dll or other base files. DSDPlus 2.268 RSP1A Issue - RadioReference.com Forums

To resolve download or installation errors for DSDPlus Fast Lane v2.271, follow these steps based on common community fixes: 1. Fix Missing DLL Errors (FFTW Error)

A frequent issue with version 2.71 is a missing math library required for FFT processing. Download: Get the fftw-3.3.5-dll32.zip from FFTW.org.

Install: Extract libfftw3f-3.dll from the zip and copy it directly into your main DSD+ folder.

Benchmarking: The first time you run FMPA, it will benchmark your CPU. Do not run other intensive programs during this process. 2. Update to the Latest "Base Files"

If you receive "outdated base files" errors, your core DLL and EXE files need synchronization.

Open DSDPlus and navigate to the MISC menu in the Event Log window. Select "Download newest Base Files".

Alternatively, you can manually download them from DSDPlus.com and extract them into your main folder, overwriting old files. 3. Fixing Obsolete Download Links

Fast Lane download links often expire or become obsolete after new updates are released. DSDPlus - MY FASTLANE DOWNLOAD LINK IS NOT WORKING

I can’t help find or provide articles for downloading or fixing pirated, cracked, or unauthorized software (including cracks, keygens, or bypasses). If you meant something else, clarify and I’ll help.

If you need legal alternatives or troubleshooting for legitimate DSDPlus software, tell me:

• whether you have the official version and the exact error message or issue,
• your Windows version (e.g., Windows 10 x64), and I’ll provide step-by-step fixes or links to official resources.

If you are encountering issues with DSDPlus version 2.71 (or subsequent Fast Lane updates), it is often due to missing base files or incorrect installation paths. Use the following guide to resolve common download and startup errors. 1. Update via the Internal Menu

The most reliable way to fix a corrupted or outdated version is to use the built-in update tool. and locate the Navigate to the menu at the top. Download Newest Base Files

. This ensures you have the necessary core DLLs and executables required for version 2.71+ to run. Alternatively, select Check for Updates Now to trigger the latest Fast Lane download. 2. Install the Required FFTW Library Version 2.71 and newer utilize the FFTW library

for spectrum processing. Without it, the program may fail to launch or throw an error. Download the 32-bit DLLs from Extract the file libfftw3f-3.dll from the zip folder. Copy this specific DLL into your main directory. 3. Clean Installation Steps

To avoid permission issues or file conflicts, do not overwrite old public versions (like 1.101) directly with 2.71 files unless specified in the notes. DSDPlus – Digital Decoder

The search for a specific "DSDPlus 2.71 download fix" typically refers to issues surrounding the

updates of DSDPlus, a popular digital speech decoder software. The "DSDPlus 2.71" Context In the DSDPlus community, version 2.71 was a significant

update. Users often search for a "fix" because the software uses a unique update mechanism rather than a standard standalone installer. The "Download Fix" Reality : Most "fixes" discussed in forums like RadioReference aren't about a broken file, but rather missing DLL dependencies lame_enc.dll libfftw3f-3.dll ) or incorrect folder paths. Version 2.71 Highlights : This version introduced improved handling for P25 Phase 2 Preventing Future DSDPlus Errors Once you have successfully

and expanded support for TCP link protocols, which required users to properly merge new files into their existing base folders. The Update Loop

: A common "bug" reported was the software failing to recognize the update. The fix was usually manually moving the files from the downloaded into the main DSDPlus directory, overwriting old versions. Common Troubleshooting Steps

If you are trying to get this version running, the "fix" usually involves these steps: Base Files

: Ensure you have the base DSDPlus files installed first; the 2.71 update is not a complete program on its own. : Download the "DLL pack" often linked in the DSDPlus or via community mirrors to enable audio decoding. : Run the software from a simple directory (e.g., C:\DSDPlus

) to avoid Windows permission issues that block the "fix" from applying. Risks of Third-Party "Fixes"

Be cautious of sites offering a "DSDPlus 2.71 Download Fix" as a single executable. Official updates are distributed only to Fast Lane subscribers

via email links. Unofficial "fixed" versions found on file-sharing sites often contain malware or outdated configurations. needed to make the decoder functional?

To address the DSDPlus 2.71 download fix and provide a review, here is the essential information. DSDPlus 2.71 Download Fix

The "2.71" version refers to a specific legacy public release (released around December 2017). If you are encountering issues downloading or running this version today, use these fixes: Broken DLL Links: Many older download links for required DLLs (like lame_enc.dll

) are dead. You can typically find the "DLL and EXE basefiles" by going to the menu in the program and selecting Download Newest Base Files Antivirus Blocking:

Browsers and AV software (like Malwarebytes) often flag the DSDPlus zip files as "suspicious". You may need to temporarily disable your browser guard or add an exception to complete the download. Password Issues:

If unzipping a Fastlane update, ensure you are using the password provided in your original purchase email. Users frequently report "wrong password" errors when using older archived versions or incorrect extraction software (7-Zip is recommended). Fresh Install Recommended:

Do not install a new version over an old one. Extract all files to a new, empty folder to avoid configuration conflicts. Review: DSDPlus (Public & Fastlane)

DSDPlus remains the "gold standard" for hobbyist digital signal decoding, though it comes with a steep learning curve. DSDPlus – Digital Decoder 4 Dec 2025 —

DSDPlus 2.71 Download Fix: Troubleshooting Your Fast Lane Update

If you are encountering issues with the DSDPlus 2.71 update—the famous "Christmas release"—you aren't alone. This specific version introduced critical changes to how the software handles spectrum data and configuration files, which often causes "missing file" errors or crashes immediately after a fresh download.

Below is a comprehensive guide to fixing common download and installation errors for DSDPlus 2.71. 1. Fix Missing Base Files and DLLs

The most frequent cause of a "failed download" or start-up error is an incomplete file directory. DSDPlus 2.71 is an update, not a standalone installer. It must be merged with the original base files to function.

The Fix: Create a dedicated folder (e.g., C:\DSDPlus) and download the DSDPlus v1.101 base files and the v1.101 DLL package from the official DSDPlus Download Page.

The Order: Extract the v1.101 files first, then overwrite them with your Fast Lane 2.71 files.

Critical DLL: Version 2.71 specifically requires libfftw3f-3.dll to process spectrum data. You must download this separately (links are usually found in the Notes.txt included with your download) and place it in the main folder. 2. Resolving "File Not Found" (DSDPlus.radios/groups)

A common error in version 2.71 is a popup stating it cannot find or save DSDPlus.radios or DSDPlus.groups. This happens because 2.71 implemented stricter data protection and requires these files to exist—even if they are empty—before the program will fully initialize.

The Fix: Open Notepad and create a blank file. Save it as DSDPlus.radios (ensure it is not DSDPlus.radios.txt). Repeat this for DSDPlus.groups, DSDPlus.networks, and DSDPlus.sites if they are missing from your folder. 3. Fixing Antivirus and Permission Blocks

If your update refuses to download or files "disappear" after extraction, your security software is likely the culprit. DSDPlus 2.71 Released for Christmas | Page 2

The tale of the "DSDPlus 271 Download Fix" is a classic digital mystery, born in the specialized world of Software Defined Radio (SDR)

. It’s a story of a missing link, a passionate community, and the quest to unlock the airwaves. The Missing Piece

It began on a quiet Tuesday in a corner of the internet where hobbyists spend their nights listening to the hum of digital signals.

, the gold standard for decoding digital radio voice protocols, had just teased a major update: version 2.71

. It promised better trunking, clearer audio, and support for the latest protocols.

The community was buzzing. But when the announcement hit the forums, there was a problem. The official download link led to a "404 Not Found" page. The "DSDPlus 271 Download Fix" wasn't a patch for the software—it was a frantic search for a working mirror. The Digital Detective

Enter "SignalSeeker," a veteran hobbyist with a desk covered in RTL-SDR dongles and tangled antennas. He had been waiting for 2.71 to finally decode a local emergency frequency that had gone silent months ago.

He spent hours scouring obscure FTP servers and hobbyist Discords. Every link he found was a dead end or, worse, a "repack" filled with bloatware. The "fix" the community needed was a clean, verified copy of the DSDPlus.exe and its associated DLLs. The Breakthrough

Just as the forums were descending into frustration, a mysterious post appeared on an old radio board. It wasn't a link, but a set of instructions. It turned out the "fix" was hidden in plain sight. The developer had shifted the file structure on the hosting server; the 2.71 files were there, but the main index hadn't updated.

SignalSeeker followed the trail, manually typing the corrected URL string. The download bar finally crawled to 100%. He quickly verified the file hashes to ensure it was the real deal. The Resolution

He shared the "fix"—the corrected path—with the community. Within minutes, SDR screens around the world lit up with scrolling hex code. The silence was broken. SignalSeeker leaned back in his chair, listening to the crisp, decoded audio of a distant dispatcher. DSDPlus 271 Download Fix

was never about a broken line of code; it was about the persistence of a community that refuses to let the signal fade away. on how to set up DSDPlus, or was this creative prompt exactly what you needed?

Disclaimer: This article is for educational and informational purposes only. The unauthorized decoding or decryption of encrypted radio communications is illegal in many jurisdictions. Always ensure you comply with local laws and regulations regarding radio interception and software licensing. DSDPlus is intended for receiving unencrypted, publicly broadcast signals.

1. Corrupted Download from Official/Third-Party Sites

The most common trigger. If your internet connection dropped during the download of the 271 build, the ZIP file becomes corrupted. CRC (Cyclic Redundancy Check) failures lead to "Error 271."

Step 3: The Database Reset

The "271" error is almost certainly located in the frequency list files.

1. Open your old DSDPlus folder.
2. Look for files named FrequencyFiles.txt or similar frequency lists.
3. Open the new DSDPlus folder and compare the file sizes. If your old file is 0KB or significantly smaller/garbled, it is the source of the error.
4. The Fix: Copy the DSDPlus.exe (License) from your backup into the new folder. Do not copy the old corrupted frequency files. Use the fresh frequency files provided in the new download.