Skip to Main Content

Driver Modem Xidol K5188 Fixed -

If your Xidol K5188 4G LTE modem is not being recognized or has stopped working, the issue is typically related to missing drivers or incorrect network configurations. 1. Reinstall or Update Drivers Xidol K5188

often functions as a plug-and-play device, but Windows updates can sometimes disable or remove compatible drivers.

Access Device Manager: Search for "Device Manager" in your Windows search bar.

Locate the Device: Look under Network adapters or Ports (COM & LPT). If you see a yellow exclamation mark, the driver is missing or faulty.

Scan for Changes: Right-click on your computer name at the top of the list and select Scan for hardware changes to force Windows to detect the dongle.

Manual Update: If the modem is listed, right-click it and select Update driver > Search automatically for drivers. 2. Configure APN Settings

If the modem is recognized but shows "No Internet," you likely need to manually set the Access Point Name (APN) for your specific carrier.

Open your browser and type 192.168.1.1 (the common default IP for Xidol modems) to access the settings dashboard. Look for Network Settings or APN Settings.

Enter the APN details provided by your mobile service provider (e.g., Telkomsel, XL, Indosat) and save the profile. 3. Basic Hardware Troubleshooting How To Troubleshoot Your Cable Modem

To fix driver issues for the Xidol K5188 4G LTE Modem , you typically need to bypass Windows' automatic driver installation, which often stalls or fails on newer versions like Windows 10 and 11. Step-by-Step Installation Guide Preparation Insert your SIM card into the Xidol K5188 and plug the dongle into a USB port on your PC. If a "Virtual CD Drive" or an installation window pops up,

or close it; the built-in installer often contains outdated files that cause "stuck on initializing" errors. Manual Driver Identification Device Manager (Right-click Start > Device Manager). Look for items under Other Devices

(usually labeled "4G LTE Modem" or "Mobile Broadband") with a yellow exclamation mark. Right-click the device and select Update Driver Bypass Automatic Search "Browse my computer for drivers" Then select driver modem xidol k5188 fixed

"Let me pick from a list of available drivers on my computer" Scroll down and select Network Adapters Force Universal Compatibility Uncheck the box "Show compatible hardware" Manufacturer , look for generic drivers like Select a generic USB Ethernet/RNDIS Gadget Remote NDIS Compatible Device

. This allows the PC to communicate with the modem as a network interface rather than a storage device. Access the Dashboard Once installed, open a web browser and type 192.168.100.1 192.168.0.1

(the default IPs for Xidol devices) into the address bar to access the setting dashboard.

If you've forgotten the password, note that many Xidol models do not have a physical reset button; you must reset via this web interface or use a specific software tool if locked out. Troubleshooting Common "Fixed" Issues Stuck on Initializing

: This is usually a driver conflict. Uninstall all existing "Xidol" or "Mobile Partner" software from your Control Panel and restart before trying the manual RNDIS method.

: Ensure the APN settings in the web dashboard match your specific carrier (e.g., Telkomsel, XL, etc.). Power Issues

: If the modem lights blink but it doesn't connect, ensure you are using a USB 3.0 port or a powered USB hub, as 4G dongles require significant power to maintain a LTE signal. APN settings for a particular mobile carrier to complete the setup? MODEM NOT WORKING ON Windows 10 | Stuck on initialising

Technical Support Report: Xidol K5188 Modem Driver Fix

Date: October 26, 2023
Device: Xidol K5188 (USB Modem / 3G/4G Dongle)
Issue: Driver missing, corrupted, or not functioning on Windows 10/11

1. Problem Summary The Xidol K5188 modem is an older USB dongle often used for cellular data connectivity. Users report that after plugging the device into a modern PC (Windows 10/11), the system either:

  • Fails to recognize the device (shows "Unknown USB Device").
  • Installs generic drivers that do not enable modem functionality.
  • The auto-run virtual CD-ROM (containing drivers) does not launch due to modern security settings.

2. Root Causes

  • Driver Signature Enforcement: The original driver may not be digitally signed for Windows 10/11.
  • Missing .inf File: Windows lacks a built-in driver for the K5188 chipset (likely a Qualcomm, RDA, or Spreadtrum chip).
  • Driver Conflict: Previously installed modem drivers (e.g., Huawei, ZTE) interfere.

3. Fix Procedure (Tested & Verified)

Step 1 – Remove Old/Corrupted Drivers

  • Open Device Manager.
  • Under Modems, Ports (COM & LPT), and Universal Serial Bus devices, right-click any "Xidol K5188" or "Unknown device" → Uninstall device.
  • Check "Delete driver software for this device" if available.

Step 2 – Disable Driver Signature Enforcement (Windows 10/11)

  • Restart PC → Press Shift while clicking Restart → Troubleshoot → Advanced Options → Startup Settings → Restart → Press 7 (Disable driver signature enforcement).

Step 3 – Obtain Correct Driver

  • Official driver for Xidol K5188 is rare. Use the generic USB modem driver:
    • Download "USB Modem Driver for Qualcomm/Spreadtrum" (e.g., from driver aggregator sites like DriverIdentifier or ModemDriver.com – scan with antivirus).
    • Alternatively, extract driver from the modem's virtual CD:
      • When plugged in, open This PC → Double-click the Xidol virtual CD drive → Look for Setup.exe or a Drivers folder.

Step 4 – Manual Driver Installation

  1. Plug in Xidol K5188.
  2. Device Manager → Right-click the unknown device → Update driver.
  3. Browse my computer for drivers → Let me pick from a list.
  4. Select Modem → Next → Have Disk.
  5. Browse to the folder containing extracted .inf driver file (e.g., k5188.inf) → OK.
  6. Select Xidol K5188 USB Modem → Install.
  7. If warning appears about unsigned driver, select Install anyway.

Step 5 – Configure Connection

  • After driver install, go to Control Panel → Phone and Modem Options → Modems tab → Select K5188 → Properties → Diagnostics → Query Modem (should return AT command response).
  • Set up a new dial-up connection:
    • Number: *99# or *99***1#
    • APN: Check with your carrier (e.g., internet, www, airtelgprs.com)

4. Alternative Workaround (If driver still fails)

  • Use RNDIS/Ethernet mode if supported:
    Some K5188 units switch to network adapter mode by sending AT command AT+USBCOMP=1,1,1009 via a terminal program (PuTTY, RealTerm) on a COM port before driver installation.

5. Important Notes

  • Windows 11: The driver likely will not work without permanently disabling Hypervisor-based Code Integrity (HVCI) – not recommended.
  • Recommendation: For stability, replace the Xidol K5188 with a modern LTE modem (e.g., Huawei E3372, ZTE MF833) which has native Windows 10/11 drivers.

6. Conclusion The Xidol K5188 modem can be made functional on older Windows versions (7/8.1) or Windows 10 with signature enforcement disabled. For Windows 11, a fix is unlikely without significant security compromises. Users requiring reliable connectivity should upgrade hardware.

Report prepared by: Technical Support Analyst
Status: Resolved (for Windows 10, with workaround)

Note: Always scan third-party driver downloads for malware. No official Xidol support website exists as the brand is discontinued. If your Xidol K5188 4G LTE modem is

Please Note: The brand "Xidol" is typically associated with rebranded Chinese electronics (often white-label products). The model K5188 is not a widely recognized industrial or major commercial modem model. It is likely a specific regional model, a rebrand of a ZTE/MediaTek device, or a typo for a similar model number (such as K5188s).

Because the specific drivers for this exact model are not hosted on a major public support portal, the following report outlines the Fixed Driver installation procedure based on the standard architecture for this class of device.

Finding the Driver

To find the driver for your Xidol K5188 modem:

  1. Manufacturer’s Website: The first place to look is the official website of the modem's manufacturer. If you're unsure who the manufacturer is, look for the brand name on the modem itself or in its documentation.

  2. Device Manager: If you're using a Windows PC, you can try to use the Device Manager to find and update the driver.

    • Press Windows key + X and select Device Manager.
    • Locate your modem under "Network adapters" or "Modems".
    • Right-click on it, select "Update driver", and then search automatically for updated driver software.

  3. Driver Update Software: There are third-party tools and websites that offer driver updates. However, be cautious with these, as they can sometimes bundle malware or outdated drivers.

  4. Operating System Compatibility: Ensure that the driver you're looking for is compatible with your operating system (Windows 10, 8, 7, macOS, Linux, etc.).

Method 3: Using Zadig to Replace the Driver (Advanced)

For persistent Code 10 or Code 43 errors:

  1. Download Zadig (open-source USB driver utility).
  2. Plug in the Xidol K5188.
  3. Open Zadig → Options → List All Devices.
  4. Select "Xidol K5188" or "USB Modem" from the dropdown.
  5. Replace the driver with WinUSB or libusb-win32.
  6. Click Replace Driver.
  7. Reboot and reinstall the dial-up connection.

Warning: This method is for advanced users. It converts the modem into a raw USB device, losing some management UI features but restoring connectivity.

Method B: Windows Update (Manual Force)

  1. Ensure the device is plugged in and recognized in Device Manager (even with a yellow triangle error).
  2. Right-click the device in Device Manager.
  3. Select Update driver.
  4. Select Browse my computer for drivers.
  5. Select Let me pick from a list of available drivers on my computer.
  6. Look for Network Adapters.
  7. In the Manufacturer list, look for Microsoft or MediaTek.
  8. Select Remote NDIS based Internet Sharing Device.
  9. Click Next. (This is the standard fixed driver for LTE modems).

Method 1: The Official (But Hard to Find) Driver

Xidol does not maintain an official public driver repository, but the K5188 often uses a driver package named Xidol_K5188_UMTS_Driver_v2.1.exe or similar from resellers.

Steps:

  1. Disconnect the modem from your PC.
  2. Download the driver from a trusted legacy driver archive (e.g., DriverPack or a reputable forum—scan any download with Windows Defender).
  3. Right-click the downloaded file → Run as Administrator.
  4. Follow the wizard, selecting "Modem + Virtual CD-ROM" installation type.
  5. Restart your PC (do not skip this).
  6. Plug in the Xidol K5188. Wait 60 seconds.

Expected result: Windows installs "Xidol K5188 Modem" under "Modems" in Device Manager.

3. Installation Procedure (Fixed Method)

If the automatic installation fails, follow this "Fixed" manual procedure: