To print PVC cards on an Epson L805 Go to product viewer dialog for this item.
, you must use a specific card tray and a corresponding template to ensure the design aligns perfectly with the physical card. 📥 Templates and Software Resources Epson L805
and similar models like the L800 or T50, you can download specialized templates and drivers from the following providers:
Photoshop Templates: You can download the Epson PVC Card Template from EL INSUMO SRL, which is specifically designed for the L805 model.
Comprehensive Kits: Sites like Imprink offer Templates, Instructions, and Software for Word and Photoshop to help configure the card tray correctly.
Custom Generation: If you have a JPG or PNG, you can use the ID Card Printing Tool from Brainstorm ID to generate a PDF with the cards in the correct positions.
Official Software: For newer models or general photo management, the Epson Download Center provides official drivers and the Epson Photo+ software, which supports ID card printing layouts. 📐 Technical Specifications
To avoid waste, your design must follow the standard CR80 size: Dimensions: 85.6 mm x 54 mm (3.375" x 2.125"). Resolution: Minimum 300 DPI for professional clarity.
Bleed Area: It is recommended to include a 1–2 mm bleed to ensure the print covers the entire card without white edges.
Detailed Specs: You can find exact measurements and design guidelines at CardMX Specifications. 🛠️ Printing Process Setup Setting up the
for PVC printing often requires a "workaround" because the standard driver may not natively show the PVC tray option. Driver Modification: Many users install the Epson R260/R290 driver alongside the
driver. This enables the "CD/DVD" or "PVC Tray" selection in the print settings, as detailed in the Brainstorm ID Setup Guide. Printer Settings: Media Type: Select CD/DVD.
Paper Size: Set to A4 (not borderless) to ensure the tray is detected correctly.
Print Quality: Use "Best Photo" or "Photo" mode for vibrant colors. descargar plantilla para imprimir tarjetas pvc en epson l805
Physical Alignment: Insert the PVC cards into the tray and push the tray into the printer until the arrows on the tray align with the marks on the printer's feeder.
💡 Key Tip: Always perform a test print on plain paper first. Cut the paper to size and place it over the tray to verify alignment before using an actual PVC card. For more troubleshooting, refer to the Inkjet PVC Cards Help page.
If you tell me which software you're using, I can provide a more tailored setup guide: Software choice (e.g., Photoshop, Word, or Epson Photo+)?
Design type (e.g., employee badges, gift cards, or membership IDs)?
Para imprimir tarjetas de PVC en una Epson L805 , puedes descargar plantillas gratuitas en formato Photoshop (PSD) desde sitios especializados en insumos de impresión como
. Estas plantillas ya vienen configuradas con las medidas exactas y la posición de la bandeja de 2 tarjetas para asegurar que el diseño encaje perfectamente. Opciones de descarga y software
Existen diversas alternativas según el software que prefieras utilizar: Adobe Photoshop: Es la opción más común. Puedes bajar el archivo en sitios como (compatible con modelos L800/L805/T50). Epson Photo+:
Es el software oficial recomendado por Epson para el diseño y posicionamiento de tarjetas de identificación en sus modelos más recientes, permitiendo ajustes rápidos de orientación. Corel Draw / Illustrator: Sitios como ofrecen plantillas en formato que puedes importar para trabajar con vectores. Configuración crítica para la impresión
Para que la Epson L805 reconozca la bandeja de PVC, es necesario realizar un ajuste en el controlador, ya que nativamente está configurada para papel: Cambio de Driver: Muchos usuarios cambian el controlador de la L805 al de la Epson Stylus Photo R290
en las propiedades de la impresora para habilitar las opciones de bandeja de CD/DVD, que es la que se usa para las tarjetas. Ajustes de papel: En las preferencias de impresión, selecciona como tipo de papel y tamaño de papel
Establece la calidad en "Foto" o "Mejor foto" para obtener colores vibrantes sobre el material plástico. Recomendaciones de uso como imprimir credenciales pvc desde photoshop epson l805
Printing professional-quality PVC cards using an Epson L805 is an excellent way to create durable ID badges, membership cards, or loyalty tags at a low cost. To achieve perfect results, you need a combination of the right hardware, a specific template, and correct printer settings. Necessary Equipment and Software
Before downloading a template, ensure you have the required physical components. The Epson L805 is a photo printer, but it cannot print directly onto plastic without these items: To print PVC cards on an Epson L805
Inkjet PVC Cards: Standard plastic cards will not work. You must use cards with a special "inkjet receptive" coating that allows the ink to dry without smearing.
PVC Card Tray: You need a specific plastic tray designed for the Epson L805 (often shared with models like the L800 or R280). This tray replaces the standard CD/DVD tray.
Graphic Design Software: While you can use Microsoft Word, professional results are best achieved using Adobe Photoshop, Illustrator, or CorelDRAW. Choosing the Correct Template
The template you download must match your specific PVC tray. Most Epson L805 trays hold two cards at a time. The standard dimensions for a CR80 card are 85.60 x 53.98 mm. 1. Photoshop (PSD) Templates This is the gold standard for high-resolution printing.
Layering: Look for templates that include "Bleed" layers. This ensures the color goes all the way to the edge without leaving white borders.
Resolution: Ensure the template is set to 300 DPI (dots per inch) and CMYK color mode for accurate printing. 2. Microsoft Word Templates
If you are not a designer, Word is a functional alternative.
Layout: You will need a template that uses a "Canvas" or "Table" layout where the cells are positioned exactly where the tray holes are.
Limitations: Alignment in Word can be tricky, as printers often have a slight margin of error (1-2mm) when pulling the tray. 3. Epson Print CD Software
Often overlooked, the software that comes with your printer is highly effective. You can create a custom template by setting the inner and outer diameters to match the card dimensions. Printing Procedures and Best Practices
Once you have your template and design ready, follow these steps to ensure a successful print:
Printer Settings: In the Epson print dialog, set the "Source" to CD/DVD Tray. Set the "Type" to Ultra Glossy Photo Paper or Epson Premium Glossy. This tells the printer to use a higher ink density for the plastic surface.
Alignment Test: Before using an expensive PVC card, print your template on a regular sheet of paper. Place the paper over the tray to see if the designs line up perfectly with the card slots. Siempre trabaja en CMYK para impresión comercial; algunas
Drying Time: Even though inkjet PVC cards are "instant dry," it is best to handle them by the edges and let them sit for a few minutes before putting them in a wallet or holder.
Flip and Print: To print on the back, wait for the front to dry completely, flip the card vertically in the tray, and run the back-side template through the printer. Where to Find Downloads
You can find these templates by searching for "Epson L805 PVC Tray Template" on design resource sites. Many manufacturers of the plastic trays provide the specific PSD or Word files on their websites for free to ensure their customers get the best results.
What software are you planning to use (Word, Photoshop, etc.)? Do you already have the PVC tray and inkjet-coated cards? Are you printing single-sided or double-sided cards?
I can provide more specific step-by-step alignment tips based on your setup.
Para imprimir tarjetas de PVC en una Epson L805 , es fundamental contar con una bandeja de PVC (tray) compatible y utilizar tarjetas de PVC específicas para inyección de tinta
(inkjet), ya que las tarjetas estándar de laminación térmica no absorberán la tinta adecuadamente. OC Consultores 1. Descarga de Plantillas
Existen diversas opciones para obtener la base de diseño, dependiendo del software que prefieras utilizar: Adobe Photoshop (Recomendado):
Es el formato más preciso para mantener las dimensiones reales. Puedes encontrar plantillas oficiales de proveedores como el Centro de Aprendizaje de Brainstorm ID o sitios especializados como Detintas (Argentina) , que ofrecen archivos específicos para modelos Epson L805 y similares Microsoft Word y Adobe Illustrator: También hay disponibles archivos
que vienen pre-configurados con las posiciones exactas de la bandeja. Epson Photo+: Si prefieres el software oficial, la aplicación Epson Photo+
permite diseñar e imprimir directamente seleccionando la opción de tarjeta de identificación de PVC. EL INSUMO SRL 2. Configuración de Impresión
Para que el diseño coincida con la posición física de la tarjeta en la bandeja, ajusta los siguientes parámetros en el controlador de la impresora: PVC ID Card Printing Guide for Epson L805 (Free Template)
Aquí tienes una propuesta completa para una publicación (post) optimizada para SEO y redes sociales. He incluido varias opciones según dónde vayas a publicar (Blog/Web, Facebook o Descarga Directa).
Since the L805 is a flat paper printer using PVC sheets (e.g., 2, 4, or 8 cards per A4 sheet), templates must include:
After clicking download, the user receives:
